ilkka_nissila wrote:
It is also very strange to buy and sell gear and entire systems .... each time wasting potentially tens of thousands of dollars just to get a temporary advantage in one area, and to sniff new gear. This forum seems to have a lot of such people and it's the most ridiculous thing ever.
I just spent about a week in Southern California and was reminded of the immense concentration of wealth in that area. I suspect for some 'wasting' 10s of thousands of dollars on frequent system changes would be, for them, the equivalent of pouring a glass of water down the drain. Inconsequential because other factors take much higher priority in their purchasing decisions. Of course this does not apply to everyone, or even the majority. But here on FM, at least on one of the other boards, there are certainly members who do not have the financial constraints of the majority and will buy/sell gear on what seems like mere whims.
ilkka_nissila wrote:
It is also very strange to buy and sell gear and entire systems just because one brand has an advantage in one area for the moment, only to realize that another brand has an even better solution for that a couple of years later, and then a third repeats the advantage, each time wasting potentially tens of thousands of dollars just to get a temporary advantage in one area, and to sniff new gear. This forum seems to have a lot of such people and it's the most ridiculous thing ever.
Guilty as charged. I do so out of technical curiosity rather than to gain any photographic advantage, although sometimes a camera or lens will surprise me and I wind up keeping it. One of the benefits of FM is B+S, which has almost zero frictional cost and so allows those predisposed to try and release gear without losing much in the process...many times for less than the cost of renting but without renting's time constraints.
Tony Ross wrote: Jman13 wroteTony Ross wrotelighthound wroteJman13 wroteSony saw the writing on the wall and built a huge lead in FF mirrorless,Agree with all you said except this.^^^
Sony tried to compete with Canon and Nikon in the DSLR market but realized they couldn't compete and needed to take a different route. Nikon made their first MILC in 2011 then Canon made the theirs in 2012 and the following year (2013) Sony joined the mirrorless game with the a7 and the rest is history. Sony went all in and pushed forward in the mirrorless market and left the two giants standing there with their pants down around their ankles. They were both too fat and happy in the DSLR arena and didn't follow-up fast enough even though they both had the first MILC.
At that point, there was a fork in the tracks ahead. Canon and Nikon were both at full steam ahead with their successful DSLR history propelling them down the tracks but they needed to slow down (so to speak) to get ready for the fork in the tracks ahead.
You can't stop a train on a dime, it takes time to slow them down and then get back up to speed again. Canon's train is much larger than Nikons so that allowed Nikon to make the needed adjustments and get back up to speed faster than the 800lb gorilla that some love and some love to hate.
As a Canon user, aka fangirl (as I've been called) I think 2024 is the year Canon get's back up to speed and that it's going to be a wild and crazy year in the Canon camp. Hoping within the next 6 days we'll learn a good bit more.
Side note:
If Canon releases the rumored RF 200-500 as an f/4 with a price tag north of $14k, I just might consider jumping off the train at the next town. Canon needs an affordable (4-5k range), lightweight and reasonably fast (f/4.5-f/5.6) wildlife lens.You are missing some key facts. You say "in 2013 Sony joined the MILC game with the A7". You seem to be claiming that Nikon and Canon had MILC before Sony, which is a gross distortion of the facts.
Have you not heard of Sony's NEX lines? Introduced in 2010, and using the same E mount that all of Sony's Alpha line use today. These predate the 2011 and 2012 dates you mentioned for Nikon and Canon.
Moreover, your mention of Nikon introducing a MILC in 2011 - that was the Nikon 1 line, using a tiny sensor, and discontinued in 2018, well before the launch of Nikon's Z series. The Nikon 1 series were nice, but very plastic, and the tiny sensor limited them a lot.
And your Canon 2012 entry? The EOS-M release - that was hardly ground-breaking, and shackled to the limitations of supporting Canon's EF lens lineup.
So neither Canon nor Nikon had the "first" MILC. Sony's NEX line predated both, and it's the only mount still central to a thriving line of cameras.
.The first real MILC was Panasonic’s G1 for Micro 4/3 in 2008. Panasonic and Olympus had the initial head start, and the the NEX joined the party with a larger sensor. Samsung’s NX line joined around the same time, but died shortly after they released the NX1, which is a shame because that camera was fricking awesome for the time.I made no claim that Sony was first. I said the Sony did not follow Canon or Nikon, but rather preceded them. Can you argue with that?
I wasn't arguing with you...I was adding additional information, following your statement of:
So neither Canon nor Nikon had the "first" MILC. Sony's NEX line predated both
That statement could be perceived as saying that NEX was the first MILC, and so I clarified. I know you didn't definitively state that, but someone else in the thread could perceive that information to be the case, so I added additional information purely for clarification.
Compared to R3:
Flash mount cover now has a lock. Easy to lose it on R3 esp when squeezing it out of a bag.
Strap bar on the bottom for hand grips. R3 didn't have one like all the EF 1 series. I had to get plates that came with one to keep using my old hand grip (Hand Strap E1) from the 1DX days.
Separate white balance button on top right of the camera. Top panel lcd light button doubles as another function, cropping icon (light blue color)?
Card reader cover has a safety lock/two step mechanism.
Top LCD panel battery indicator shows %.
Another light blue icon by the mFn button next to the shutter button on both grips. WiFi transmitter?
Top panel settings on one of the photo shows M mode, shutter at 16,000, f1.2, ISO 125.
Jaron @ PetaPixel said he's been told the leaked specs are not accurate. He's well connected in the industry so I would give his statement more weight than others.
Compared to R3:
Flash mount cover now has a lock. Easy to lose it on R3 esp when squeezing it out of a bag.
Strap bar on the bottom for hand grips. R3 didn't have one like all the EF 1 series. I had to get plates that came with one to keep using my old hand grip (Hand Strap E1) from the 1DX days.
Separate white balance button on top right of the camera. Top panel lcd light button doubles as another function, cropping?
Card reader cover has a safety lock/two step mechanism.
Come on Canon, just release the basic specs. It is not like they are going to be changing the sensor or the FPS or new AF tech over the next few months. Sure they will do some tweaks to FW and iron out some bugs from the feedback of the pro sports photogs that have an early copy, but they aren't going to be changing the basics we want to know.
arbitrage wrote:
Come on Canon, just release the basic specs. It is not like they are going to be changing the sensor or the FPS or new AF tech over the next few months. Sure they will do some tweaks to FW and iron out some bugs from the feedback of the pro sports photogs that have an early copy, but they aren't going to be changing the basics we want to know.
Geoff, I'll contact Psycho 1 and tell you tomorrow morning
Compared to R3:
Flash mount cover now has a lock. Easy to lose it on R3 esp when squeezing it out of a bag.
Strap bar on the bottom for hand grips. R3 didn't have one like all the EF 1 series. I had to get plates that came with one to keep using my old hand grip (Hand Strap E1) from the 1DX days.
Separate white balance button on top right of the camera. Top panel lcd light button doubles as another function, cropping?
Card reader cover has a safety lock/two step mechanism.
Top LCD panel battery indicator shows %.Come on Canon, just release the basic specs. It is not like they are going to be changing the sensor or the FPS or new AF tech over the next few months. Sure they will do some tweaks to FW and iron out some bugs from the feedback of the pro sports photogs that have an early copy, but they aren't going to be changing the basics we want to know.
They know marketing and hype.
If I recall correctly for R5, they would release a few specs at a time, over weeks.
Once we have pix from Olympics, then people will able to get more info from the photo files even if they don't announce anything yet.
Compared to R3:
Flash mount cover now has a lock. Easy to lose it on R3 esp when squeezing it out of a bag.
Strap bar on the bottom for hand grips. R3 didn't have one like all the EF 1 series. I had to get plates that came with one to keep using my old hand grip (Hand Strap E1) from the 1DX days.
Separate white balance button on top right of the camera. Top panel lcd light button doubles as another function, cropping?
Card reader cover has a safety lock/two step mechanism.
Top LCD panel battery indicator shows %.Come on Canon, just release the basic specs. It is not like they are going to be changing the sensor or the FPS or new AF tech over the next few months. Sure they will do some tweaks to FW and iron out some bugs from the feedback of the pro sports photogs that have an early copy, but they aren't going to be changing the basics we want to know.
I know you're excited but stay calm.
The longer Canon can keep the specs under tight wraps (way tighter then we've ever seen before) the more the competition will be caught off guard and the longer it will take them to scramble to push something out that will try to compete.
Compared to R3:
Flash mount cover now has a lock. Easy to lose it on R3 esp when squeezing it out of a bag.
Strap bar on the bottom for hand grips. R3 didn't have one like all the EF 1 series. I had to get plates that came with one to keep using my old hand grip (Hand Strap E1) from the 1DX days.
Separate white balance button on top right of the camera. Top panel lcd light button doubles as another function, cropping?
Card reader cover has a safety lock/two step mechanism.
Top LCD panel battery indicator shows %.Come on Canon, just release the basic specs. It is not like they are going to be changing the sensor or the FPS or new AF tech over the next few months. Sure they will do some tweaks to FW and iron out some bugs from the feedback of the pro sports photogs that have an early copy, but they aren't going to be changing the basics we want to know.They know marketing and hype.
If I recall correctly for R5, they would release a few specs at a time, over weeks.
Once we have pix from Olympics, then people will able to get more info from the photo files even if they don't announce anything yet.
Canon hasn't "Hyped" anything. They simply announced the development of the R1 which is all they ever do before the Olympics because that allows them to put it in the hands of the pros. The click baiters are the ones that are creating a sense of hype based on nothing but pure speculation and guesses.
I think the R5 leaks you are referring too is exactly why Canon put an end to any insider leaks. They have clearly tightened their security to prevent that from happening so far in advance again. It sucks for us users but it really must suck for the competition.
We'll find out the specs on the R1 and R5II only when Canon is ready. Hopefully they'll let something "slip out", but it doesn't look like it's going to happen this time around.
stanj wrote:
And the same hot shoe cover as the R3 that gets lost simply by looking at it. Fortunately, the R7 cover fits nicely, too.
It looks and sounds like they have added a safety lock on the hot shoe cover to prevent it from slipping off.
I would imagine that they will be available for the R3 and other bodies after the release of the R1.
Nope. That is new and a great addition. Better still if you can reprogram to something else even though I’d leave it as a crop button if the camera has higher MP.
Perhaps future camera acquisition should be legalized similar to a marriage.
“I, Canon Fanboy take thee, Canon to be my wedded camera company, to have and to hold from this day forward, for better, for worse, for richer, for poorer, in sickness and in health, to love and to cherish, till death do us part"
Switching brands would require a trip to a Divorce court!
Owning more than one brand, would be akin to polygamy, and female ownership would equate to "same sex" marriage.
I wasn't talking R5 leaks. They were official staged campaign giving us bits of spec every few weeks on their official website. One week on sensor, another on Af etc. I was following the Japanese site, but I'm sure it was on the US too.
Canon is the king of marketing. They know how this works.
Compared to R3:
Flash mount cover now has a lock. Easy to lose it on R3 esp when squeezing it out of a bag.
Strap bar on the bottom for hand grips. R3 didn't have one like all the EF 1 series. I had to get plates that came with one to keep using my old hand grip (Hand Strap E1) from the 1DX days.
Separate white balance button on top right of the camera. Top panel lcd light button doubles as another function, cropping?
Card reader cover has a safety lock/two step mechanism.
Top LCD panel battery indicator shows %.Come on Canon, just release the basic specs. It is not like they are going to be changing the sensor or the FPS or new AF tech over the next few months. Sure they will do some tweaks to FW and iron out some bugs from the feedback of the pro sports photogs that have an early copy, but they aren't going to be changing the basics we want to know.I know you're excited but stay calm.
The longer Canon can keep the specs under tight wraps (way tighter then we've ever seen before) the more the competition will be caught off guard and the longer it will take them to scramble to push something out that will try to compete.
Compared to R3:
Flash mount cover now has a lock. Easy to lose it on R3 esp when squeezing it out of a bag.
Strap bar on the bottom for hand grips. R3 didn't have one like all the EF 1 series. I had to get plates that came with one to keep using my old hand grip (Hand Strap E1) from the 1DX days.
Separate white balance button on top right of the camera. Top panel lcd light button doubles as another function, cropping?
Card reader cover has a safety lock/two step mechanism.
Top LCD panel battery indicator shows %.Come on Canon, just release the basic specs. It is not like they are going to be changing the sensor or the FPS or new AF tech over the next few months. Sure they will do some tweaks to FW and iron out some bugs from the feedback of the pro sports photogs that have an early copy, but they aren't going to be changing the basics we want to know.They know marketing and hype.
If I recall correctly for R5, they would release a few specs at a time, over weeks.
Once we have pix from Olympics, then people will able to get more info from the photo files even if they don't announce anything yet.Canon hasn't "Hyped" anything. They simply announced the development of the R1 which is all they ever do before the Olympics because that allows them to put it in the hands of the pros. The click baiters are the ones that are creating a sense of hype based on nothing but pure speculation and guesses.
I think the R5 leaks you are referring too is exactly why Canon put an end to any insider leaks. They have clearly tightened their security to prevent that from happening so far in advance again. It sucks for us users but it really must suck for the competition.
We'll find out the specs on the R1 and R5II only when Canon is ready. Hopefully they'll let something "slip out", but it doesn't look like it's going to happen this time around. ...Show more →
So maybe the 30MP leaked specs are accurate, for crop mode. And then there's the secret sauce crop button that changes it back to 45MP+ for a more watered down performance spec.
It could just be a general aspect ratio button (well it probably is but you can maybe limit the selections) and may not indicate higher MPs. The current Canon cameras at 24MPs have crop toggle option you can program to a custom key so not necessarily indicative of high MP.
With Canon cameras even at 24 or 30MP it can still be advantageous to use crop mode for better subject detection and smaller files/deeper buffer. Who knows maybe the R1 gives a big FPS boost in APS-C mode so that people will want to use it more often if they are going to have to crop anyways (can't get closer, don't have a longer lens)??