Jeff Fenske wrote:
...The hole size of f/8 in a FF ... is smaller in M43, smaller still in a 1-inch sensor compact, and smaller still in a 1/1.7?
If so, do you know why?
The f-stop is the ratio of lens focal length divided by the apparent diameter of the aperture, as seen through the front of the lens.
f-stop = f / Da, it's called a dimensionless quantity because it's (mm) / (mm) = no 'dimensions'
Consider that a "normal" lens on a FF DSLR has a 50mm focal length. Further, consider a 50/1.4 lens, which has a "fast" max. aperture of f-stop = 1.4. If you put that lens on an APC-C camera, like the 7DII, then it's still a 50mm f/1.4 lens, but since the sensor is smaller, the image that it caputres is equivalent to an 85mm lens on FF. This doesn't mean that it's an 85mm lens on the 7DII, it's still a 50/1.4 lens. The aperture, as defined by f-stop, is independent of the camera, it's defined by the lens itself, and only the lens.
One of the confusing things is that the lenses on many cameras with small sensors, like a Sony RX100 IV, are described in terms of "equivalent FF focal length". For example, the Sony RX100 IV lens is often described as being 24-70/1.8-2.8 (35mm equivalent). The actual focal length of this lens (as written on it) is 8.8-25.7mm. Its wide-open aperture is f/1.8 to f/2.8 for the 8.8mm to 25.7mm range of focal lengths, not for the 'equivalent' 24-70mm range. So, the small sensor camera has smaller aperture than a full frame (or larger sensor) camera at common f-stop values because it actually uses lenses with much shorter focal lengths.