Ulysseita wrote:
Fred Miranda wrote
Well, I have the new TAP LM-EA9 adapter in hands and I really like what I see so far. I will start a new thread with more thoughts on it soon.
Most of the issues I had with the previous EA7 seem to be resolved. There will be no more wobble since there are actually 4 motors and the unit goes back and forward with the same amount of support. There is still noise when AF is working but it's way more tolerable now...meaning it's not high pitch.
The software didn't get much functionality improvement but AF is more accurate now, especially when using Eye-AF. I've tested it with many lenses so far: Leica 35/1.4, Leica 28/1.4, Voigtlander 28/2 II, Leica 50/1.4 and CV 50/1.5. All did great. Longer lenses need manual focus adjustment just like before.
I have a question for those who still have the EA7 version:
When changing the focal length in camera (by changing the aperture setting). Does that change in focal length only happens in camera to aid IBIS or it's also written to the EXIF when exporting the raw file? In other words, does the focal length change shows up in LR or it always show the default "40mm f/2.8" ?? It change the focal length on focal length tab , 28mm as exm.
But the lens remains still the 40mm 2.8.
This will still remain with the new TAP LM-EA9 version. The focal length can be added to the EXIF but the camera name will always be a constant.
One could add the correct aperture to EXIF as well but the exposure would have to be compensated using exposure compensation in-camera since proper exposure is only achieved selecting f/2 aperture.
This is from this FAQ which still applies:
=============
Is there a way that I can have the actual aperture recorded in the EXIF?
FM member joe256 has reported a method of recording an aperture value (from F2 to F8) in the EXIF, whilst still exposing correctly:
Learned something new (to me at least) about the TAP. You can put the f/stop set on the lens in the EXIF (2.0 - 8.0) in addition to the focal length AND maintain the correct exposure. You do this by using exposure compensation. Set the aperture on the camera the same as on the lens, then compensate accordingly by dial or menu:
f/2.0 = 0, f/2.8 = -1, f/4.0 = -2, f/5.6 = -3, and f/8.0 = - 4 . F/8.0 has to be done in the menu while the first three can be done on the top dial or the menu. You can also interpolate. F/11 @ -5 exposes correctly and puts the aperture in the EXIF but it resets the EXIF focal length to 15mm unless you remap it via the Android app.
If you are new to TAP, note the difference between setting the f/stop set on the lens and setting it on the camera.
ADDED: If you change the exposure compensation by the menu, it resets to 0 when the camera is turned off.