LBJ2 wrote:
Juha Kannisto wrote
LBJ2 wrote
Juha Kannisto wrote
I updated my TAP to v6 as well after reading about the new firmware here (had some intermittent failures loading the new firmware to it on my A7II where the remaining data counter just stopped progressing before reaching 0, but it worked after a couple of re-tries). I tried it out with my A9 today using Voigtländer Heliar 50/3.5 and Ultron 35/1.7 and indeed AFC was working much better, no more aggressive hunting / focus pulsing. I still find AFC much more reliable as AFS is giving me false positive focus locks here and there. Focusing outside of the central region also worked pretty well several times when I used touch-focus to place the focus area somewhere well beyond the central area (towards the corners). I'm happy with the AF performance after the update on the A9.
I'm still having another problem that didn't seem to get improved though, the adapter is doing some kind of "restarts" randomly, e.g. while focusing it can suddenly switch to Manual mode, and do similar movements as when the camera is powered on and then come back to AF mode. Today it also got stuck in manual mode a couple of times after doing this and I had to restart the camera to make it work again. These random restarts happen quite often, e.g. I saw it around 10 times in 2-3 hours of shooting today. I just completed the update to V6 using the ArIII + TAP + Voigt 35 F1.2 VII. First couple of shoots and I experienced the same. While testing the restart happened twice then I realized on the second restart the camera restarted wih the TAP @ F90. So I changed back to F2 and so far after about 12-15 test shots I haven't experinced the restart again. Will keep checking. I had those random restarts on the previous firmware v5 too, probably as frequently as with v6, but I don't remember the adapter getting stuck in MF mode after such restart on the previous firmware. I saw that scenario twice today and first time I fixed it by unmounting and re-mounting the adapter, and 2nd time by restarting the camera (power off/on). I didn't have to restart or remount the adapter/lens. In my case the camera restarted on its own after a few seconds. I'm up to 29 test shots now and camera/adpater seem stable so far, no restarts yet. Will try next with the A9.
For me most of the restarts also work out with TAP returning to functional AF mode on its own after a couple of seconds. I shot a lot of images outdoors today when trying out the new FW, more than 1000 shots and lots of them in low light. Not sure what conditions provoke the restart but I guess it might be a case of continuous AF running into some situation that TAP can't handle well. These restarts only tend to happen for me while AFC is actively focusing on something (shutter button is half-pressed). I usually use TAP in AFC with Wide area focusing and if I want to focus on something particular that Wide mode doesn't pick up, I use touch focus to guide it. The restarts did happen in both of these modes today. I guess it might not show up in short testing easily but may show up in regular use unless it's something unique with my unit. Anyway, I've had these restarts with TAP on my A9 probably since I first used the combo and not only on the new firmware, but can't recall having them on my A7II (if I did, they must have been uncommon enough for me not to pay attention).
Anyway, I'll keep using TAP more now since AFC is now working much better than it was previously on A9 and will keep an eye on the restart problem to make further observations about it. It wouldn't bother me too much if it only happened once in a while but recently it's happening a bit too frequently.