charlyw wrote: HKFEVER wroteCanon is waiting for its own firmware to save its repetition If I were you I would shut up about Canon - they are doing more than can be expected to fix someone else problem!
This is not fair, Canon should fully test their share before releasing this 1DXII.
This is not fair, Sandisk should full refund or replace its not up to spec. CFast card.
This is not fair, without speaking out and putting pressure on Canon in internet, do you thing Canon nor Sandisk will care, ..
HKFEVER wrote:
This is not fair, Canon should fully test their share before releasing this 1DXII.
And you are prepared to spend $20k for the 1DxII when it is fully tested against all available memory cards? I'd bet you aren't willing to spend more money just for those tests to be made. And how would you test for hardware that at the time of the tests isn't even available yet - you have to rely on the specification. Nobody with a sane mind would expect a manufacturer to test all combinations of third party devices to work...
HKFEVER wrote:
This is not fair, Sandisk should full refund or replace its not up to spec. CFast card.
Assuming that they have something to replace them with - at the moment. A fix for such a problem isn't easily done and for the fix to be propagated to the point of sale takes time.
HKFEVER wrote:
This is not fair, without speaking out and putting pressure on Canon in internet, do you thing Canon nor Sandisk will care, ..
Canon already issued a fix for someone elses problem (already cameras have been shipped with firmware 1.0.2 which uses a workaround), again it takes time to test the update process (it's different to ship a product with new firmware against having the user - who will make mistakes - upgrade it, so additional tests and thus delays are inevitable) - so Canon went far beyond what anyone can expect!
charlyw wrote: HKFEVER wroteThis is not fair, Canon should fully test their share before releasing this 1DXII.And you are prepared to spend $20k for the 1DxII when it is fully tested against all available memory cards? I'd bet you aren't willing to spend more money just for those tests to be made. And how would you test for hardware that at the time of the tests isn't even available yet - you have to rely on the specification. Nobody with a sane mind would expect a manufacturer to test all combinations of third party devices to work...
HKFEVER wroteThis is not fair, Sandisk should full refund or replace its not up to spec. CFast card.Assuming that they have something to replace them with - at the moment. A fix for such a problem isn't easily done and for the fix to be propagated to the point of sale takes time.
Canon already issued a fix for someone elses problem (already cameras have been shipped with firmware 1.0.2 which uses a workaround), again it takes time to test the update process (it's different to ship a product with new firmware against having the user - who will make mistakes - upgrade it, so additional tests and thus delays are inevitable) - so Canon went far beyond what anyone can expect!
...Show more →HKFEVER wroteThis is not fair, without speaking out and putting pressure on Canon in internet, do you thing Canon nor Sandisk will care, ..
Wish I was in USA, then I will ask for full refund of the CFast card.
Unfortunately, I only have 7-10 days to ask for replacement for product has failure.
In other terms, that mean Canon should replace the not up to spec. Sandisk CFast card that came in the premium pack. Not asking users to swallow the not up to spec. Sandisk CFast card that Canon sell together with their camera.
HKFEVER wrote:
Unfortunately, I only have 7-10 days to ask for replacement for product has failure.
Is it Canon's fault that your area has no consumer protection to speak of? Maybe that's why products are increasingly more expensive the better the area's consumer protection is...
Besides that the CFast isn't defective - it's just buggy and Canon issued a fix to work around that bug...
charlyw wrote:
And how would you test for hardware that at the time of the tests isn't even available yet - you have to rely on the specification. Nobody with a sane mind would expect a manufacturer to test all combinations of third party devices to work...
I would assume that Canon at least thoroughly tested CFast cards that they sold with cameras around the world. Not like these cards were just introduced to the market. These were available way before the 1DxII hit the shelves. And I bet, the same cards were supplied to beta testers as well.
I believe that problem is on Canon's side because file corruption exist also on Lexar cards...
kosin wrote:
I would assume that Canon at least thoroughly tested CFast cards that they sold with cameras around the world.
And if those CFast that they tested with came with a different firmware revision that didn't yet use the 16Mb cache - nobody could have ever found the error...
charlyw wrote: HKFEVER wroteUnfortunately, I only have 7-10 days to ask for replacement for product has failure.Is it Canon's fault that your area has no consumer protection to speak of? Maybe that's why products are increasingly more expensive the better the area's consumer protection is...
Besides that the CFast isn't defective - it's just buggy and Canon issued a fix to work around that bug...
charlyw wrote: kosin wroteI would assume that Canon at least thoroughly tested CFast cards that they sold with cameras around the world.And if those CFast that they tested with came with a different firmware revision that didn't yet use the 16Mb cache - nobody could have ever found the error...
HKFEVER wrote: charlyw wrotekosin wroteI would assume that Canon at least thoroughly tested CFast cards that they sold with cameras around the world.And if those CFast that they tested with came with a different firmware revision that didn't yet use the 16Mb cache - nobody could have ever found the error...What is the average raw file size in 1DXII?
Irrelevant, the way the bug in the cache management on the card manifests itself points clearly to a cache flush problem - to ensure that all relevant data has been written the new firmware seems to fill the cache fully with data for the imagesave.bin (or whatever it's called) file...
KKFung wrote:
I got my 1Dx2 yesterday and have a flyer as below. Mine already have firmware ver. 1.0.2, seem I can use Sandisk but I don't have either Lexar or Sandisk CFast on hand now
I received my 1DxII finally yesterday, and saw this as well.
There is one problem however, I downloaded Sanitize from Sandisk as per the instruction but the program does not recognize that there is a Sandisk card inserted in the computer.
A call to Sandisk was less than fruitful they at least the ones I spoke with had no idea what's going on or how to get their program to recognize their cards.
Frustrating.
I have to honest however all cards eventually go bad but my rate so far has been
What OS did you install the Sandisk software on? For Apple OSX systems, Sandisk states the requirement for 10.10 or 10.11. I'm still on 10.9, not having found a compelling reason to upgrade to the newer versions...
Fern Trujillo wrote: KKFung wroteI got my 1Dx2 yesterday and have a flyer as below. Mine already have firmware ver. 1.0.2, seem I can use Sandisk but I don't have either Lexar or Sandisk CFast on hand now
There is one problem however, I downloaded Sanitize from Sandisk as per the instruction but the program does not recognize that there is a Sandisk card inserted in the computer.
A call to Sandisk was less than fruitful they at least the ones I spoke with had no idea what's going on or how to get their program to recognize their cards.
Frustrating.
I have to honest however all cards eventually go bad but my rate so far has been
Sandisk 3 Lexar 0
Thanks for share Fern, I think I should borrow some Sandisk cards and reader from my friend to have a test.
KKFung wrote: Fern Trujillo wroteKKFung wroteI got my 1Dx2 yesterday and have a flyer as below. Mine already have firmware ver. 1.0.2, seem I can use Sandisk but I don't have either Lexar or Sandisk CFast on hand now
There is one problem however, I downloaded Sanitize from Sandisk as per the instruction but the program does not recognize that there is a Sandisk card inserted in the computer.
A call to Sandisk was less than fruitful they at least the ones I spoke with had no idea what's going on or how to get their program to recognize their cards.
Frustrating.
I have to honest however all cards eventually go bad but my rate so far has been
Sandisk 3 Lexar 0Thanks for share Fern, I think I should borrow some Sandisk cards and reader from my friend to have a test.
The Sanitize only works with Sandisk reader not Lexar.
The 1.02 firmware is on the Canon USA support website Here - Under the "Firmware" tab.
I have installed it on my 1Dx2 and it seems OK. The instructions state to switch the camera OFF after installing the update and then remove the battery for at least 2 seconds. The CF/CFAST card which the update was installed from should be reformatted before using again. The Cfast card should be reformatted also.