fredmiranda.com Login
This topic is in the 2016 archive. You can read it and like its posts here. It is read only.

Archive 2016IDXII with corrupted RAW files

  
 
HKFEVER
Offline
Details
p.7 #1IDXII with corrupted RAW files
As far as CPS mentioned, it will create a file in the CFast card. And don't try to delete that file.

Let us know the result. I will wait a while
Jul 07, 2016 at 10:21 AM
RonLander
Offline
Details
p.7 #2IDXII with corrupted RAW files
Spent an hour testing FW1.02 on my 1dx2 with various lenses and have no corrupt files. 504 raw shots where taken in single shot and burst mode. The camera was switched off and on many times during testing.

After installing the new FW I ran the Sandisk sanitizer programme on my 128GB CFAST card that has had corrupt files before the updated FW was installed. The CFast card was then formatted in camera.

Being as the Cfast card has been sanitised and reformatted it is unlikely the firmware creates a file on the CFast card.
Jul 07, 2016 at 11:08 AM
Herb
Offline
Details
p.7 #3IDXII with corrupted RAW files
anyone try this with Lexar Cfast cards? any issues?
Jul 07, 2016 at 05:32 PM
Fern Trujillo
Offline
Details
p.7 #4IDXII with corrupted RAW files
RonLander wrote:
Spent an hour testing FW1.02 on my 1dx2 with various lenses and have no corrupt files. 504 raw shots where taken in single shot and burst mode. The camera was switched off and on many times during testing.

After installing the new FW I ran the Sandisk sanitizer programme on my 128GB CFAST card that has had corrupt files before the updated FW was installed. The CFast card was then formatted in camera.

Being as the Cfast card has been sanitised and reformatted it is unlikely the firmware creates a file on the CFast card.


how did you get sanitize to read the card? My sanitize won't read any sandisk card and i'm 5 days from leaving for Africa, I may have to leave the cfast cards home..
Jul 07, 2016 at 05:43 PM
Fern Trujillo
Offline
Details
p.7 #5IDXII with corrupted RAW files
we are discussing Sandisk NOT lexar, Sanitize will NOT read any of my 6 Sandisk cards. I never mentioned Lexar


HKFEVER wrote:
KKFung wrote
Fern Trujillo wrote
KKFung wroteI got my 1Dx2 yesterday and have a flyer as below. Mine already have firmware ver. 1.0.2, seem I can use Sandisk but I don't have either Lexar or Sandisk CFast on hand now

https://c6.staticflickr.com/8/7299/27439506813_786f9b9f98_b.jpg無標題 by KK Fung, 於 Flickr
I received my 1DxII finally yesterday, and saw this as well.

There is one problem however, I downloaded Sanitize from Sandisk as per the instruction but the program does not recognize that there is a Sandisk card inserted in the computer.

A call to Sandisk was less than fruitful they at least the ones I spoke with had no idea what's going on or how to get their program to recognize their cards.

Frustrating.

I have to honest however all cards eventually go bad but my rate so far has been

Sandisk 3 Lexar 0
Thanks for share Fern, I think I should borrow some Sandisk cards and reader from my friend to have a test.
The Sanitize only works with Sandisk reader not Lexar.


Jul 07, 2016 at 05:45 PM
arbitrage
Offline
Details
p.7 #6IDXII with corrupted RAW files
Fern Trujillo wrote:
RonLander wroteSpent an hour testing FW1.02 on my 1dx2 with various lenses and have no corrupt files. 504 raw shots where taken in single shot and burst mode. The camera was switched off and on many times during testing.

After installing the new FW I ran the Sandisk sanitizer programme on my 128GB CFAST card that has had corrupt files before the updated FW was installed. The CFast card was then formatted in camera.

Being as the Cfast card has been sanitised and reformatted it is unlikely the firmware creates a file on the CFast card.
how did you get sanitize to read the card? My sanitize won't read any sandisk card and i'm 5 days from leaving for Africa, I may have to leave the cfast cards home..


Why don't you just update to the new FW? Likely that will be sufficient without Sanitize. Canon FW release notes say that the FW doesn't require sanitize to eliminate the corrupted files. It does say that Sandisk recommends use of sanitize on a somewhat regular basis to keep the card performing to maximum speed.
Jul 07, 2016 at 05:52 PM
HKFEVER
Offline
Details
p.7 #7IDXII with corrupted RAW files
Sanitize is for Sandisk CFast reader and Sandisk CFast card only.
Sanitize won't work with other brand CF reader, CFast reader nor CF card.


Fern Trujillo wrote:
we are discussing Sandisk NOT lexar, Sanitize will NOT read any of my 6 Sandisk cards. I never mentioned Lexar

HKFEVER wrote
KKFung wrote
Fern Trujillo wrote
KKFung wroteI got my 1Dx2 yesterday and have a flyer as below. Mine already have firmware ver. 1.0.2, seem I can use Sandisk but I don't have either Lexar or Sandisk CFast on hand now

https://c6.staticflickr.com/8/7299/27439506813_786f9b9f98_b.jpg無標題 by KK Fung, 於 Flickr
I received my 1DxII finally yesterday, and saw this as well.

There is one problem however, I downloaded Sanitize from Sandisk as per the instruction but the program does not recognize that there is a Sandisk card inserted in the computer.

A call to Sandisk was less than fruitful they at least the ones I spoke with had no idea what's going on or how to get their program to recognize their cards.

Frustrating.

I have to honest however all cards eventually go bad but my rate so far has been

Sandisk 3 Lexar 0
Thanks for share Fern, I think I should borrow some Sandisk cards and reader from my friend to have a test.
The Sanitize only works with Sandisk reader not Lexar.


Jul 07, 2016 at 06:16 PM
Herb
Offline
Details
p.7 #8IDXII with corrupted RAW files
Fern Trujillo wrote:
we are discussing Sandisk NOT lexar, Sanitize will NOT read any of my 6 Sandisk cards. I never mentioned Lexar

HKFEVER wrote
KKFung wrote
Fern Trujillo wrote
KKFung wroteI got my 1Dx2 yesterday and have a flyer as below. Mine already have firmware ver. 1.0.2, seem I can use Sandisk but I don't have either Lexar or Sandisk CFast on hand now

https://c6.staticflickr.com/8/7299/27439506813_786f9b9f98_b.jpg無標題 by KK Fung, 於 Flickr
I received my 1DxII finally yesterday, and saw this as well.

There is one problem however, I downloaded Sanitize from Sandisk as per the instruction but the program does not recognize that there is a Sandisk card inserted in the computer.

A call to Sandisk was less than fruitful they at least the ones I spoke with had no idea what's going on or how to get their program to recognize their cards.

Frustrating.

I have to honest however all cards eventually go bad but my rate so far has been

Sandisk 3 Lexar 0
Thanks for share Fern, I think I should borrow some Sandisk cards and reader from my friend to have a test.
The Sanitize only works with Sandisk reader not Lexar.

sorry I wasnt clear.....has anyone tried the new FW with Lexar cards to make sure that they still work?
Jul 07, 2016 at 06:17 PM
kosin
Offline
Details
p.7 #9IDXII with corrupted RAW files
Herb wrote:
Fern Trujillo wrotewe are discussing Sandisk NOT lexar, Sanitize will NOT read any of my 6 Sandisk cards. I never mentioned Lexar

HKFEVER wrote
KKFung wrote
Fern Trujillo wrote
KKFung wroteI got my 1Dx2 yesterday and have a flyer as below. Mine already have firmware ver. 1.0.2, seem I can use Sandisk but I don't have either Lexar or Sandisk CFast on hand now

https://c6.staticflickr.com/8/7299/27439506813_786f9b9f98_b.jpg無標題 by KK Fung, 於 Flickr
I received my 1DxII finally yesterday, and saw this as well.

There is one problem however, I downloaded Sanitize from Sandisk as per the instruction but the program does not recognize that there is a Sandisk card inserted in the computer.

A call to Sandisk was less than fruitful they at least the ones I spoke with had no idea what's going on or how to get their program to recognize their cards.

Frustrating.

I have to honest however all cards eventually go bad but my rate so far has been

Sandisk 3 Lexar 0
Thanks for share Fern, I think I should borrow some Sandisk cards and reader from my friend to have a test.
The Sanitize only works with Sandisk reader not Lexar.
sorry I wasnt clear.....has anyone tried the new FW with Lexar cards to make sure that they still work?


Yes, everything works as usual with Lexar CF and CFast cards. I didn't do much shooting today to see if I will get any corrupted files though...

On the side note, I was surpised how long it took for this firmware to install. The longest I've ever done for sure
Jul 07, 2016 at 07:05 PM
ifxbonz
Offline
Details
p.7 #10IDXII with corrupted RAW files
I have the 64gig cfast that came with my camera. I cant find where to locate the product # to see if I have an effected card. So far I have had no corrupt images.
I only see a 12 digit numerical number only on the card, nothing like the numbers listed.

Andy
Jul 07, 2016 at 07:18 PM
HKFEVER
Offline
Details
p.7 #11IDXII with corrupted RAW files
ifxbonz wrote:
I have the 64gig cfast that came with my camera. I cant find where to locate the product # to see if I have an effected card. So far I have had no corrupt images.
I only see a 12 digit numerical number only on the card, nothing like the numbers listed.

Andy


The product # in on the back of the paper box, on top of the barcode.
Jul 07, 2016 at 08:01 PM
Fern Trujillo
Offline
Details
p.7 #12IDXII with corrupted RAW files
Yes, thankfully no issues with 2 different Lear cards I had purchased prior to the cameras arrival.

I have decided that the best and safest route for my upcoming overseas trip is to just take the regular 1066 Lear cards I already own.

Although I'm a bit worried about the sensor dust issue now being reported! If it's not one thing it's another.


Herb wrote:
Fern Trujillo wrotewe are discussing Sandisk NOT lexar, Sanitize will NOT read any of my 6 Sandisk cards. I never mentioned Lexar

HKFEVER wrote
KKFung wrote
Fern Trujillo wrote
KKFung wroteI got my 1Dx2 yesterday and have a flyer as below. Mine already have firmware ver. 1.0.2, seem I can use Sandisk but I don't have either Lexar or Sandisk CFast on hand now

https://c6.staticflickr.com/8/7299/27439506813_786f9b9f98_b.jpg無標題 by KK Fung, 於 Flickr
I received my 1DxII finally yesterday, and saw this as well.

There is one problem however, I downloaded Sanitize from Sandisk as per the instruction but the program does not recognize that there is a Sandisk card inserted in the computer.

A call to Sandisk was less than fruitful they at least the ones I spoke with had no idea what's going on or how to get their program to recognize their cards.

Frustrating.

I have to honest however all cards eventually go bad but my rate so far has been

Sandisk 3 Lexar 0
Thanks for share Fern, I think I should borrow some Sandisk cards and reader from my friend to have a test.
The Sanitize only works with Sandisk reader not Lexar.
sorry I wasnt clear.....has anyone tried the new FW with Lexar cards to make sure that they still work?

Jul 08, 2016 at 02:08 AM
Fern Trujillo
Offline
Details
p.7 #13IDXII with corrupted RAW files
I'm on 10.11 and it doesn't recognize any Sandisk Cfast whatsoever.

rscheffler wrote:
What OS did you install the Sandisk software on? For Apple OSX systems, Sandisk states the requirement for 10.10 or 10.11. I'm still on 10.9, not having found a compelling reason to upgrade to the newer versions...

Jul 08, 2016 at 02:10 AM
Fern Trujillo
Offline
Details
p.7 #14IDXII with corrupted RAW files
The camera came with the new firmware already uploaded AND the instruction sheet to still download and use sanitize Sandisk cards.

arbitrage wrote:
Fern Trujillo wrote
RonLander wroteSpent an hour testing FW1.02 on my 1dx2 with various lenses and have no corrupt files. 504 raw shots where taken in single shot and burst mode. The camera was switched off and on many times during testing.

After installing the new FW I ran the Sandisk sanitizer programme on my 128GB CFAST card that has had corrupt files before the updated FW was installed. The CFast card was then formatted in camera.

Being as the Cfast card has been sanitised and reformatted it is unlikely the firmware creates a file on the CFast card.
how did you get sanitize to read the card? My sanitize won't read any sandisk card and i'm 5 days from leaving for Africa, I may have to leave the cfast cards home..
Why don't you just update to the new FW? Likely that will be sufficient without Sanitize. Canon FW release notes say that the FW doesn't require sanitize to eliminate the corrupted files. It does say that Sandisk recommends use of sanitize on a somewhat regular basis to keep the card performing to maximum speed.

Jul 08, 2016 at 02:12 AM
Fern Trujillo
Offline
Details
p.7 #15IDXII with corrupted RAW files

Again I reiterate sanitize will NOT read or recognize the Sandisk brand cards it was written for.


HKFEVER wrote:
Sanitize is for Sandisk CFast reader and Sandisk CFast card only.
Sanitize won't work with other brand CF reader, CFast reader nor CF card.

Fern Trujillo wrotewe are discussing Sandisk NOT lexar, Sanitize will NOT read any of my 6 Sandisk cards. I never mentioned Lexar

HKFEVER wrote
KKFung wrote
Fern Trujillo wrote
KKFung wroteI got my 1Dx2 yesterday and have a flyer as below. Mine already have firmware ver. 1.0.2, seem I can use Sandisk but I don't have either Lexar or Sandisk CFast on hand now

https://c6.staticflickr.com/8/7299/27439506813_786f9b9f98_b.jpg無標題 by KK Fung, 於 Flickr
I received my 1DxII finally yesterday, and saw this as well.

There is one problem however, I downloaded Sanitize from Sandisk as per the instruction but the program does not recognize that there is a Sandisk card inserted in the computer.

A call to Sandisk was less than fruitful they at least the ones I spoke with had no idea what's going on or how to get their program to recognize their cards.

Frustrating.

I have to honest however all cards eventually go bad but my rate so far has been

Sandisk 3 Lexar 0
Thanks for share Fern, I think I should borrow some Sandisk cards and reader from my friend to have a test.
The Sanitize only works with Sandisk reader not Lexar.

Jul 08, 2016 at 02:13 AM
Mike Veltri
Offline
Details
p.7 #16IDXII with corrupted RAW files
Although my camera has not experienced the issue of the corruption with a Sandisk cfast card, I see a
fix is out. Firmware 1.02 for the corrupted card issue is on Canon USA site.

https://www.usa.canon.com/internet/portal/us/home/support/details/cameras/dslr/eos-1d-x-mark-ii?tab=drivers#Z7_MQH8HIC0L88RB0AMD0F1Q42K25
Jul 08, 2016 at 03:04 AM
arbitrage
Offline
Details
p.7 #17IDXII with corrupted RAW files
Fern Trujillo wrote:
The camera came with the new firmware already uploaded AND the instruction sheet to still download and use sanitize Sandisk cards.

arbitrage wrote
Fern Trujillo wrote
RonLander wroteSpent an hour testing FW1.02 on my 1dx2 with various lenses and have no corrupt files. 504 raw shots where taken in single shot and burst mode. The camera was switched off and on many times during testing.

After installing the new FW I ran the Sandisk sanitizer programme on my 128GB CFAST card that has had corrupt files before the updated FW was installed. The CFast card was then formatted in camera.

Being as the Cfast card has been sanitised and reformatted it is unlikely the firmware creates a file on the CFast card.
how did you get sanitize to read the card? My sanitize won't read any sandisk card and i'm 5 days from leaving for Africa, I may have to leave the cfast cards home..
Why don't you just update to the new FW? Likely that will be sufficient without Sanitize. Canon FW release notes say that the FW doesn't require sanitize to eliminate the corrupted files. It does say that Sandisk recommends use of sanitize on a somewhat regular basis to keep the card performing to maximum speed.


Hopefully you will find a way to get Sanitize to work in the future but it will have no bearing on getting corrupted files on your trip if you already have 1.02. From the Canon FW release notes:

About the "Refresh Tool" of SanDisk cards:
Q1: Whenever the camera is used to format a SanDisk CFast card, is it mandatory to use the refresh tool? If the refresh tool is not used, will the bottom part of still images become corrupted?
A1: The refresh tool is not related to image corruption that appears at the bottom part of still images. We are informing users about this tool as SanDisk recommends regular use of the refresh tool when using SanDisk CFast cards. For details about the use of the refresh tool, please inquire with SanDisk.
Q2: How often does the refresh tool have to be used?
A2: For details about use frequency, and the use of the refresh tool, please inquire with SanDisk.
Q3: What will happen to camera operations if I continue using a SanDisk CFast card without using the refresh tool?
A3: The speed for continuous data writing may decrease. If the data writing speed seems to have decreased during high-speed continuous shooting, please try to use the refresh tool to alleviate the problem. For any other technical questions concerning CFast cards, please inquire with SanDisk.

Notice it says that it "is not related to image corruption" and that if you don't use it the only issue will be "writing speed may decrease". It will still write way faster than your 1066x CF cards, especially as your CFast cards are likely brand new. If you are still worried then wouldn't you shoot backup using both CFast and CF anyways? I see no reason to only shoot to the CF. If the CF card goes bad during the trip (has happened to me twice in the 1DX) then you have no backup.
Jul 08, 2016 at 08:12 AM
ifxbonz
Offline
Details
p.7 #18IDXII with corrupted RAW files
Sandisk has released a card sanitizer app to refresh cfast cards.

http://kb.sandisk.com/app/answers/detail/a_id/17370/~/cfast-2.0-full-format-and-refresh-tool

Andy
Jul 08, 2016 at 09:54 AM
FM ForumsCanon ForumJoin Upload & Sell
  
 

You are not logged inLog inRegister