Hopefully Canon is working on the 1DX2 freezes as well. Reseating the battery to get it working again is a pretty sad workaround. I agree about the 7D2. Although I don't own mine anymore a lot of people still struggle with bad copies.
A friend just sent me this:
Canon will be releasing a camera firmware (Ver 1.0.2) on the Web for a download service in early July
The “xxx” at the end of the product number varies depending on the sales region. SanDisk Extreme PRO CFast2.0 64GB (SDCFSP-064G-xxx) SanDisk Extreme PRO CFast2.0 128GB (SDCFSP-128G-xxx) SanDisk Extreme PRO CFast2.0 64GB (SDCFSP-064G-xxxA) SanDisk Extreme PRO CFast2.0 128GB (SDCFSP-128G-xxxA) SanDisk Extreme PRO CFast2.0 64GB (SDCFSP-064G-xxxB) SanDisk Extreme PRO CFast2.0 128GB (SDCFSP-128G-xxxB)
Phenomenon
If a SanDisk CFast card is inserted into the camera or a card reader, the bottom part of still images recorded may be corrupted.
This phenomenon is confirmed in images recorded in both the RAW and JPEG formats. In the RAW file, the image corruption may appear in the bottom right corner of the image. In the JPEG file, the image corruption may appear in the lower third area of the image.
Please Note: Movie recording is not affected by this phenomenon. Still images or movies recorded to CF cards are not affected by this phenomenon.
Cause
This phenomenon is caused by SanDisk CFast cards. The camera does not cause this phenomenon.
Workaround
It is our understanding that image files of about 16MB or less recorded immediately before the camera’s power is turned off may become corrupted. Below are the methods available to help avoid image corruption when powering off the camera:
The Camera can be powered off in four ways: 1) When the power switch is set to OFF 2) When the card slot cover is opened 3) When the power is turned off due to the Auto Power Off setting 4) When the battery is removed
The phenomenon can be prevented by performing the procedure below:
Before powering the camera off, please take extra shots*1 because the extra shots taken immediately before the camera is powered off may experience the corruption and not the images taken before the extra shots were taken.
*1 The table below shows the most popular file types used and how many extra shots are recommended.
File Size (Approx.) How many extra shots do I need to take in order to meet the 16MB or larger requirement
23.2MB 1
L: 6.2MB 3
M1: 4.3MB 4
M2: 3.4MB 5
S: 2.2MB 8
This is really sloppy, at least they acknowledge the problem and have a fix coming out, but it never should have been a problem in the first place.
Sandisk is a common brand so it should have been caught in testing. They make it sound like it is Sandisk's fault but if those cards work with other cameras, it's not. Some standards can be a bit 'loose' in this way, companies can play the 'blame game' but in the end, it's really up to the firmware engineers to either get it working, or to say outright it doesn't work from the beginning rather than let end users figure it out on their own once the product is released.
Likely the firmware isn't doing a proper cache flush, OS unmount, or forcing / allowing the card to do the same before it is placed into sleep mode. SD cards have to be placed into sleep mode when the camera does the same, lest they drain the battery down while the camera is "off".
Access wrote:
This is really sloppy, at least they acknowledge the problem and have a fix coming out, but it never should have been a problem in the first place.
Sandisk is a common brand so it should have been caught in testing. They make it sound like it is Sandisk's fault but if those cards work with other cameras, it's not. Some standards can be a bit 'loose' in this way, companies can play the 'blame game' but in the end, it's really up to the firmware engineers to either get it working, or to say outright it doesn't work from the beginning rather than let end users figure it out on their own once the product is released.
Likely the firmware isn't doing a proper cache flush, OS unmount, or forcing / allowing the card to do the same before it is placed into sleep mode. SD cards have to be placed into sleep mode when the camera does the same, lest they drain the battery down while the camera is "off"....Show more →
Canon's firmware isn't doing that for Sandisk only
I got my 1Dx2 yesterday and have a flyer as below. Mine already have firmware ver. 1.0.2, seem I can use Sandisk but I don't have either Lexar or Sandisk CFast on hand now
This sounds very much as if the Sandisk CFast do use a faster flash memory area (likely MLC cells in SLC mode) as a write through cache - and runs into trouble when committing that cache. The workaround seems to enforce a cache flush by writing enough data to the card to fill up that cache (by overwriting the ImgSaver.bin file...
KKFung wrote: HKFEVER wroteSandisk Asia just asked me to take the card to HK dealer for exchange,
It must almost cost nothing to manufacture memory cards, Did they say they exchange a new and issue fixed card to you or actually nothing change, just a customer service?
No idea, will be replaced with different batch or keep on going around and around.
Back from Sandisk service center:
- They don't know anything about Canon's claim
- They don't know anything about their own post of waiting for Canon's new firmware
- They don't have stock in for replacement
- Est. end of July to mid Aug for replacement
Canon is waiting for its own firmware to save its repetition
Sandisk is waiting for Canon to prevent the cost of replacement
Custom is waiting for them to replace the not up to spec. CFast
Sandisk should just replace the not up to spec. CFast
Don't try to just ask us to swallow those CFast card.
Can they guarantee that those card can be insert in other device and won't have issue!!!!!
HKFEVER wrote: KKFung wroteWe guess right and it is not good news. Just hope the Lexar works fine, the only possible solution in this momentJust noticed C Hing you are located in HK.