One thing I forgot to mention that might be of interest to some is that I found during AF micro-calibration, the optimal settings I get depend on the subject distance. For the record, the lenses I calibrated were the 600/4 IS, 400/2.8 II, 300/2.8 and 70-200/4 IS. I normally shoot with these at subject distances just this side of infinity, so you might think calibration is a waste of time, but such was not my experience. I found that I had to perform my calibration at target distances that are typical for my shooting, which isn't as easy as it might seem, considering that my typical subject distance on the 600 is roughly 300 meters. I found that if I calibrated these long lenses with a target that was much closer to me than my typical subject, the results I got in the field were less than acceptably sharp. When I calibrate at the desired distance, my actual results are a lot better.
Also, when I do calibration, I shoot a minimum of four shots at each setting, simply because the Mark III AF bounces around so much (meaning I often get inconsistent results). I find that if I shoot a lot of shots and then average them, I can come pretty close to what works out to be the "best" setting.
Just thought I'd pass that along in case anyone finds it interesting or helpful.