fredmiranda.com Login
This topic is in the 2007 archive. You can read it and like its posts here. It is read only.

When will Mark III focusing issues be resolved?

What issues, my Mark III works perfectly16% · 52
Firmware 1.1.1.1.1.1.1.1.314 will be released today and resolve all issues2% · 8
More firmware will be released in the near future that fixes the problems16% · 51
Canon will have a mechanical fix in the next few months26% · 83
When the Mark III N is released40% · 131
Total Votes325

Archive 2007Canon's Mark III fix time frame

  
 
brainiac
Offline
[X]
Details
p.4 #1Canon's Mark III fix time frame
Just bought a 1Diii. Doubt I will ever need 10fps tracking so wasn't bothered. Camera seems great. 10fps is great for fast focus bracketing, a technique I like to use in low light with wide aperture alternatives. you can just hold your finger down and sort of shove it at your victim and one always comes sharp. It only takes half a second.

6400 iso is usable and that was the reason for my purchase.

the colour accuracy on the lcd is rotten. way worse than my 5D's. but i can live with it.

i don't really care if there's a fix, but i will upgrade to 5Dii when it comes.
Sep 08, 2007 at 07:43 PM
DavidP
Offline
Details
p.4 #2Canon's Mark III fix time frame
Yakim Peled wrote:
My guess is that some chip/circuit in the AF system was not produced to match all tolerance levels. The 50/50 score in the polls makes me suspect that.

However, as a QC person for the last few years, I can not figure out how it passed any QC inspection.


I agree . . but it's easy to figure out how it passed QC . . . the problem doesn't show up except in specific conditions, and I doubt that any testing they do would reveal that.
Sep 08, 2007 at 09:00 PM
DavidP
Offline
Details
p.4 #3Canon's Mark III fix time frame
nathanlake wrote:
Would you buy a car that many people reported had bad brakes?


If the bad brakes problem only showed up when you were driving down twisting mountain roads in the dead of winter above 5,000 feet, probably so. Why? I don't drive in those conditions!

But, the car would have to be better in other ways (compared to its predecessor) . . ways that mattered to me.
Sep 08, 2007 at 09:03 PM
DavidP
Offline
Details
p.4 #4Canon's Mark III fix time frame
You know, I wonder if it's something REALLY simple that's being overlooked.

Like . . . you know how GSM phones interfere electronically with radios, telephones, etc? What if a nearby cell phone is what's causing interference with the AF sensors?

Do those who have problems routinely shoot with cell phones nearby?
Sep 08, 2007 at 09:06 PM
Curator
Offline
Details
p.4 #5Canon's Mark III fix time frame
beewee wrote:
From what I've been told by a Canon product specialist, it seams that a physical design fix is required. The guy I spoke to at a CPS expo mentioned that the 40D's AF was designed specifically to withstand large temperature fluctuations (unlike the 1D3) and even the 1Ds3 has a slightly modified AF module that is a somewhat improved version of the 1D3's AF system.

There are basically two options, Canon does a mass recall to swap out AF modules for 1D3 owners or Canon slaps all the early adopters of the 1D3 in the face and quickly releases a 1D3n.


Wow, this is pretty important news! Which CPS was this?

Sep 08, 2007 at 09:17 PM
Pixel Perfect
Offline
Details
p.4 #6Canon's Mark III fix time frame
DavidP wrote:
You know, I wonder if it's something REALLY simple that's being overlooked.

Like . . . you know how GSM phones interfere electronically with radios, telephones, etc? What if a nearby cell phone is what's causing interference with the AF sensors?

Do those who have problems routinely shoot with cell phones nearby?


The phones have caused cancer of the digic III chip!
Sep 08, 2007 at 09:23 PM
slau
Offline
Details
p.4 #7Canon's Mark III fix time frame
Just for fun:

How many people voted but don't even own the 1DMk3 or have USED one before?
Sep 08, 2007 at 10:55 PM
Yakim Peled
Offline
Details
p.4 #8Canon's Mark III fix time frame
DavidP wrote:
Yakim Peled wroteMy guess is that some chip/circuit in the AF system was not produced to match all tolerance levels. The 50/50 score in the polls makes me suspect that.

However, as a QC person for the last few years, I can not figure out how it passed any QC inspection.
I agree . . but it's easy to figure out how it passed QC . . . the problem doesn't show up except in specific conditions, and I doubt that any testing they do would reveal that.


The whole point of a good QC is to design tests which will cover ALL aspects of possible use. Thus, even extreme and remote possibilities must be foreseen and checked.

In the last 7 years I am doing QC for a large telecom company and never - not even once - was a problem surfaced in production which was in any way connected to the sort of things I check. Do you think I might qualify as a QC manager in Canon? Will you back me up?




Happy shooting,
Yakim.
Sep 09, 2007 at 02:09 AM
stuuke
Offline
Details
p.4 #9Canon's Mark III fix time frame
slau wrote:
Just for fun:

How many people voted but don't even own the 1DMk3 or have USED one before?


I addressed this before but it doesn't matter who owns or has used the Mark III. The way Canon handles a problem like this effects current Canon customers with other cameras as well as potential Canon customers. There are enough reports for everyone to just accept that a significant number of Mark III's have problems whether they have ever seen one or not.
Sep 09, 2007 at 01:20 PM
Mariner
Offline
[X]
Details
p.4 #10Canon's Mark III fix time frame
I don't know if many of you remember back a couple of decades ago when American Auto makers had much the same attitude as Canon seems to be displaying with one of its new flagship models (Mark 3). Eventually the consumers switch loyalties (in that instance to Japanese products) and once converted, don't switch back. For many of us it would be a costly switch but I for one will wait and see how Canon handles the problem before adding any new lenses or bodies to my kit. Certainly Canon will not loose any sleep over the loss of my business, but I think I am typical of a lot of non-professional enthusiasts and Canon simply cannot ignore that fraction of their customer base, without it effecting their bottom line. Time will tell, I do feel sympathy for those who trusted the Canon trademark, they were shortchanged.
Regards-John
Sep 09, 2007 at 02:00 PM
jomor
Offline
Details
p.4 #11Canon's Mark III fix time frame
For the owners of the MK3 I can understand your frustration. The rest of us all need to take a deep breath and relax. It seems to me that so many of us are getting reactionary over all this stuff. Will they fix the MK3, can they fix it, why won't they admit it, I'm going switch to Nikon, the D3 sounds awesome blah blah blah
The Mk3 sounded awesome too, it is, it has a focusing issue. The Nikon D3 sounds great but wait unit it's been tested! The 1DsMk3 sounds incredible, but again I would not rush out just to be one of the first to own it. Why does everyone have to have things right away! My 5D and 1DMK2 suit me just fine. If they fix the MK3 I will probably buy one, or I will just wait until the next round, and even then only until it's been tested. As a pro I need to rely on my gear, I won't run out with un-tested gear on a job that's just nonsense, and being irresponsible. I'm sure most of you don't this bu I think a few of you are just happy little consumers and need new toys!
Sep 09, 2007 at 02:28 PM
Curator
Offline
Details
p.4 #12Canon's Mark III fix time frame
jomor wrote:
For the owners of the MK3 I can understand your frustration.


I think this should be changed to: "For the owners of the MK3 having problems, I can understand your frustration."

There are plenty of people using the MK3 that do not have these problems. Maybe this is due to not shooting under the exact conditions as RG, but in any event, the camera is giving many the expected results.


Sep 09, 2007 at 02:44 PM
csm
Offline
Details
p.4 #13Canon's Mark III fix time frame
At this point, any Canon owner should be wondering what the heck Canon is doing...especially to its flagship sports camera...one that many people use to make money.

I don't think people that don't own the camera can talk about the problem with any degree of authority, but what Canon has done with this issue is really a mess...and that affects any Canon owner.


Edited by Shane Canfield on Sep 09, 2007 at 08:36 PM GMT (Reason: to correct typo)
Sep 09, 2007 at 04:22 PM
jomor
Offline
Details
p.4 #14Canon's Mark III fix time frame
Yes it's a mess all right. What makes it worse is Canon not stepping up to the plate and saying "okay this isnt right and we will fix the problem". Instead all we hear is that they are looking at firmware to improve the camera. They are not taking responsibility for a defective camera!
I have lost faith in them, but not to the point of abandoning them. I have been shooting professionally for over 20 years. I'm happy with what I have, like most people I always keep my eyes and ears open for improvements. But I never rush right out and buy. I really hope that Canon get this camera fixed up. It will take them even longer to remove the tarnish from their once proud name.

John
Sep 09, 2007 at 07:05 PM
Pixel Perfect
Offline
Details
p.4 #15Canon's Mark III fix time frame
It's all about perception. Currently the 1D III is perceived as having a high probability of not performing as expected, rightly or wrongly. It's up to Canon to clear the air either way for our sake and theirs.
Sep 09, 2007 at 10:56 PM
Kenny Chaffin
Offline
Details
p.4 #16Canon's Mark III fix time frame
beewee, thanks for posting this. I hope they do the right thing. I'm so pissed at this situation. If something doesn't happen in the next few weeks I'm all aboard for a class-action lawsuit. My 20D is a better camera wrt focusing.

KAC
Sep 10, 2007 at 05:58 AM
Curator
Offline
Details
p.4 #17Canon's Mark III fix time frame
Kenny Chaffin wrote:
beewee, thanks for posting this. I hope they do the right thing. I'm so pissed at this situation. If something doesn't happen in the next few weeks I'm all aboard for a class-action lawsuit. My 20D is a better camera wrt focusing.

KAC


Well, if what beewee said is true, and they do move to a Mark IIIN to fix the problem, you may have a good case.
Sep 10, 2007 at 10:18 AM
Paul B
Offline
Details
p.4 #18Canon's Mark III fix time frame
beewee wrote:
From what I've been told by a Canon product specialist, it seams that a physical design fix is required. The guy I spoke to at a CPS expo mentioned that the 40D's AF was designed specifically to withstand large temperature fluctuations (unlike the 1D3) and even the 1Ds3 has a slightly modified AF module that is a somewhat improved version of the 1D3's AF system.

There are basically two options, Canon does a mass recall to swap out AF modules for 1D3 owners or Canon slaps all the early adopters of the 1D3 in the face and quickly releases a 1D3n.


It's strange that the 1D3 wouldn't be designed for large temperature fluctuations (and the 40D would) given that it's presumably used under more taxing outside conditions than a "consumer" body. Did he say why this was the case?
Sep 10, 2007 at 10:48 AM
Garylv
Offline
Details
p.4 #19Canon's Mark III fix time frame
Paul B wrote:
It's strange that the 1D3 wouldn't be designed for large temperature fluctuations (and the 40D would) given that it's presumably used under more taxing outside conditions than a "consumer" body. Did he say why this was the case?


I agree. I'd have to think he was just scrambling to come up with some kind of an explanation or answer. It obviously doesn't make any sense. He's waiting to find out about the Mark III's AF issues just like the rest of us.

Sep 10, 2007 at 10:58 AM
jomor
Offline
Details
p.4 #20Canon's Mark III fix time frame
So I guess every one is giving up on this thread? Is the Mk3 a dead topic now? Everyone just to dammed frustrated to talk about it any more?
Oct 04, 2007 at 10:46 PM
FM ForumsCanon ForumJoin Upload & Sell
  
 

You are not logged inLog inRegister