fredmiranda.com Login
This topic is in the 2007 archive. You can read it and like its posts here. It is read only.

When will Mark III focusing issues be resolved?

What issues, my Mark III works perfectly16% · 52
Firmware 1.1.1.1.1.1.1.1.314 will be released today and resolve all issues2% · 8
More firmware will be released in the near future that fixes the problems16% · 51
Canon will have a mechanical fix in the next few months26% · 83
When the Mark III N is released40% · 131
Total Votes325

Archive 2007Canon's Mark III fix time frame

  
 
stuuke
Offline

p.1 #1Canon's Mark III fix time frame
Just for fun but when do you think Canon will have the Mark III issues resolved?
Sep 04, 2007 at 10:12 AM
stuuke
Offline
Details
p.1 #2Canon's Mark III fix time frame
I did but I didn't keep it. I tried another one this weekend with the same results. There are still some people that believe the focusing problems are all in our imagination and a conspiracy by Rob Galbraith to discredit Canon. We're all at Canon's mercy so might as well have some fun with it.
Sep 04, 2007 at 10:37 AM
Levendis
Offline
Details
p.1 #3Canon's Mark III fix time frame
Fun poll indeed - I can think of one more -

Will Rob Galbraith be invited again for the Canon Tokyo outing next year? (Yes/No/Yes but under armed guard)
Sep 04, 2007 at 12:26 PM
inness
Offline
Details
p.1 #4Canon's Mark III fix time frame
stuuke wrote:
Just for fun but when do you think Canon will have the Mark III issues resolved?


They will resolve them :

1/ two weeks after I get mine

2/ they have to admit they have a problem first

and I don't think its funny when over on my side of the pond they cost $6000

Bob
Sep 04, 2007 at 02:20 PM
cham4807
Offline
Details
p.1 #5Canon's Mark III fix time frame
Why isn't "when hell freezes over" in there?
That would get my vote!!
Sep 04, 2007 at 04:12 PM
jomor
Offline
Details
p.1 #6Canon's Mark III fix time frame
Good thing people have a sense of humour about this, otherwise we would all be crying!

Sep 04, 2007 at 04:40 PM
Tom_W
Offline
Details
p.1 #7Canon's Mark III fix time frame
This is beyond firmware, and will require a mechanical fix. Otherwise, they'd have fixed it by now.

Sep 04, 2007 at 08:08 PM
csm
Offline
Details
p.1 #8Canon's Mark III fix time frame
Personally I go from being ticked to disappointed...they better get the AF to match my Mk2n (and the old Mk2 I recently sold)...this is just TOO much money for AF issues like this.
Sep 04, 2007 at 08:44 PM
fungke
Offline
Details
p.1 #9Canon's Mark III fix time frame
if it is in fact a mechanical problem, would canon fix existing units or just leave them as is?
Sep 04, 2007 at 08:50 PM
csm
Offline
Details
p.1 #10Canon's Mark III fix time frame
fungke wrote:
if it is in fact a mechanical problem, would canon fix existing units or just leave them as is?


Oh man, don't even suggest that!
Sep 04, 2007 at 10:05 PM
Pixel Perfect
Offline
Details
p.1 #11Canon's Mark III fix time frame
When Canon see how even the D300 blows the 1D III out of the water AF performance wise, they'll maybe act with an updated hardware fix, but if you already have one too bad.

Of course this is the cynical way of looking at the issue.

Otherwise firmware 1.4142135623730950488016887242097 will eventually fix it.
Sep 04, 2007 at 10:17 PM
Alan321
Offline
Details
p.1 #12Canon's Mark III fix time frame
They need to fix it soon or else the 1Ds3 will be afflicted too - if it isn't already. That would be disastrous for Canon's reputation and I suspect that is why they allowed for a December release date even though a 40D can be made available in weeks rather than months after product announcement.

We might see a 6D / 5D2 early next year instead of a 1Ds3 if they cannot fix the 1D3 problems. The trouble is that changing a model in a big way takes a lot longer than a few months.

If the problem drags on then the 1D3 model name will be mud and they will have to release a new model, which will further undermine the already dubious value of the 1D3.

Another problem is that warranty may expire before Canon fix the 1D3. They'll need to address that issue too to save some face.

Of course, I could be wrong

Unless Nikon's new cameras fail to live up to the hype then we can expect Nikon top-end models to be far superior to Canon for a couple of years.

- Alan
Sep 05, 2007 at 04:57 AM
Yakim Peled
Offline
Details
p.1 #13Canon's Mark III fix time frame
My guess is that some chip/circuit in the AF system was not produced to match all tolerance levels. The 50/50 score in the polls makes me suspect that.

However, as a QC person for the last few years, I can not figure out how it passed any QC inspection.

Happy shooting,
Yakim.
Sep 05, 2007 at 06:17 AM
UA935
Offline
Details
p.1 #14Canon's Mark III fix time frame
fungke wrote:
if it is in fact a mechanical problem, would canon fix existing units or just leave them as is?


I don't think Canon would have any option other than to repair peoples cameras as they will have sold an item which is unfit for the purpose for which it was intended.

The warranty shouldn't come into it at all.
Sep 05, 2007 at 06:20 AM
Steve Spencer
Offline
Details
p.1 #15Canon's Mark III fix time frame
Pixel Perfect wrote:
When Canon see how even the D300 blows the 1D III out of the water AF performance wise, they'll maybe act with an updated hardware fix, but if you already have one too bad.

Of course this is the cynical way of looking at the issue.

Otherwise firmware 1.4142135623730950488016887242097 will eventually fix it.


It will be interesting to see how good the autofocus is on the new Nikon cameras. They have made a big jump going from the 11 point autofocus of the D2X to the new 51 point autofocus in the new cameras. For my friends that shoot Nikon I hope they pull it off, but how can anyone know how well it will work at this point.
Sep 05, 2007 at 06:21 AM
Kier
Offline
Details
p.1 #16Canon's Mark III fix time frame
The deafening silence from Canon months after the initial reports of this problem, lead me to suspect that they may indeed try to convince the world that all Canon shooters have suddenly become incompetent and can't use this wonderful flawless camera Canon have provided.

If they haven't even admitted that they are seriously investigating the possibility that there is a problem, I now hold out little hope that they will finally admit that there is indeed a flaw and fix it.
Sep 05, 2007 at 06:58 AM
lexvo
Offline
Details
p.1 #17Canon's Mark III fix time frame
Pixel Perfect wrote:
Otherwise firmware 1.4142135623730950488016887242097 will eventually fix it.


Hey, that's square root of 2. Possible because the sensor has 2 dimensions.
Sep 05, 2007 at 07:09 AM
Yakim Peled
Offline
Details
p.1 #18Canon's Mark III fix time frame
Kier, a friend of mine tells me it's something to do with the Japanese culture. They will not admit it until they have identified the problem and found a solution.

Happy shooting,
Yakim.
Sep 05, 2007 at 07:13 AM
Kier
Offline
Details
p.1 #19Canon's Mark III fix time frame
Yakim Peled wrote:
They will not admit it until they have identified the problem and found a solution.


Yeah, hence the worry.

If they haven't found the problem and come up with a fix all these months after the initial reports started coming in, should we still be confident that they will identify the problem and fix it in a reasonable time frame (I would say they have already had a reasonable time to fix it), or is it possible that they already know about the problem but cannot fix it, or even that they have identified the problem and will not fix it, prefering to save face by never admitting that the problem exists at all, instead blaming photographers for being unqualified to handle the MkIII?
Sep 05, 2007 at 08:24 AM
Yakim Peled
Offline
Details
p.1 #20Canon's Mark III fix time frame
My guess is that the latter option is not a valid one for a mega company like Canon.

Happy shooting,
Yakim.
Sep 05, 2007 at 08:27 AM
FM ForumsCanon ForumJoin Upload & Sell
  
 

You are not logged inLog inRegister