Mathieu18 wrote:
k-h.a.w wrote
Mathieu18 wrote
Fred Miranda wrote
genji wrote
strohscw wrote
I would like to know how to handle a zoom (Leica R35-70 F4) on the Techart Pro according the IBIS. What is "best", switch off ibis or use 35, 50 or 70mm as FL?
Any suggestions? FM members are successfully using a number of different zooms with the TAP (Contax C/Y 35-70/3.4, Minolta MD 35-70/3.5, Vario-Elmar-R 35-70/4, etc) so it's worth adding a topic about this to the FAQ. Thanks! An alternative is set the IBIS aperture setting to 50mm when using one of the above zooms. TAP aside I was of the impression that over stabilizing is automatically problematic since it induces its own blur no matter what. I think if you're in a moderate light environment, than you're best setting to 35mm, which will help but not fully correct longer focal lengths. If you're in a tough light environment I think you need to set it correctly.
Like others I have a Custom Button set to pick a focal length. My only issue here, is the choice of Auto or Manual for IBIS. I don't like having to change (and remember) the TAP settings to pick a focal length, but if I run manual I'm not used to changing it for my native lenses. Any work arounds appreciated? You need 3 buttons to control IBIS completely without having to go into the menu.K-H. Admittedly I'm left it turned on on a tripod so many times and not seen an ill effect I don't worry about turning it off anymore. Otherwise I just have one button to change the length setting. What other button/control do I need?
Well, I posted that in the other long thread. But here it is.
* select the IBIS focal length parameter
* set IBIS ON or OFF
* select either Auto or Manual for the IBIS focal length parameter
K-H.