carstenw wrote:
Theoretically, any 6x6 system would probably be adaptable. If you have some machining capability, buying a macro ring for each side might be the cheapest way to get the bayonets. Cut them both in half, weld them together in the middle.
Yeah, Playing with the idea of using some folding camera lenses. I have multiple extension ring sets, but this was just a proof of concept. Only damaged bit is the plastic body cap, and it was far thicker than I anticipated - about 3mm. If I cut it again I would have cut a 1-1.5mm relief a bit larger, then gone through in a single shot from the same side Forstner bits worked well. The cap is far stronger than needed. Here is a still life from about 6-7 feet at f5.6.
