fredmiranda.com Login
This topic is in the 2010 archive. You can read it and like its posts here. It is read only.

Archive 2010Sigma SD1

  
 
veroman
Offline
Details
p.9 #1Sigma SD1
pdmphoto wrote:
There would not be any "jaggies" on this picture without an AA filter. There is nothing that approaches the nyquist frequency of the sensor (which can produce moire) . Take the same pic with a Kodak SLR/c and you will see a big difference in edge accutance. Even the Canon 5DII doesn't have the same ability (I own both).


I have used both cameras but sold my SLR/c a while ago. The same pic taken with each camera and the same lens would result in only a small (but often noticeable) difference in edge acutance.

However, when the images from each camera are appropriately processed, that small difference ... or even a big difference when viewed on-screen ... is almost entirely wiped out when making prints. I've compared, tested, printed, compared, tested, printed til I'm blue in the face, and I can tell you that the lack of AA filter — for all of its seeming virtues — just doesn't make much difference when images are printed either on an ink jet or in magazines ... especially when printed in magazines.

Believe me, if the SLR/c were all that superior I would have kept it. And even if it can be proven to be superior with its sans-AA-filter design, that superiority goes out the window at any ISO over 640, where the camera's color shifts, noise and reduced D/R pretty much negate the value, if any, of its naked sensor.

- Steve
Sep 30, 2010 at 08:44 AM
desinteresadam
Offline
Details
p.9 #2Sigma SD1
will this sensor clip the reds as i saw on the sd14 versus nikon d 200 comparison? what are your thoughts?
Sep 30, 2010 at 08:45 AM
Rob Riley
Offline
Details
p.9 #3Sigma SD1
IDURITA wrote:
Are there OM to Sigma adapters ?


like EOS the SA mount register is 44mm, OM are 46MM
so no, I think its not possible to adapt, you have to change the mount which is why that option exists




Edited on Sep 30, 2010 at 09:11 AM · View previous versions
Sep 30, 2010 at 09:03 AM
Paul Yi
Offline
Details
p.9 #4Sigma SD1
At ISO 160, which is the base iso for Kodak SLR/c, I haven't seen any other camera that renders pictures as beautiful as the Kodak SLR/c ....

Sharper? .....yes.
DR? ...... Oh yeah.....
Colors? .... No doubt....

In fact, I like it so much that if Canon makes 5D with the Kodak sensor as a new 5D MkIII, I'd jump all over for it......

Just think about it....
Why would Leica M9 use the Kodak sensor?

Now, let's get back to the SD1 ....
Sep 30, 2010 at 09:05 AM
Ian.Dobinson
Offline
Details
p.9 #5Sigma SD1
Rob Riley wrote:
IDURITA wroteAre there OM to Sigma adapters ?
like EOS the SA mount register is 44mm, OM are 46MM
so no, I think its not possible to adapt, you have to change the mount which is why that option exists



But OM is one of the easier just slap an adapter on the lens and use it on an EOS so you should be able to do the same with the SA mount.
Sep 30, 2010 at 09:17 AM
Tariq Gibran
Offline
Details
p.9 #6Sigma SD1
desinteresadam wrote:
will this sensor clip the reds as i saw on the sd14 versus nikon d 200 comparison? what are your thoughts?


It should not as the True II processor in the most current Sigma's are said not to have the red clip issue.
Sep 30, 2010 at 09:25 AM
Tariq Gibran
Offline
Details
p.9 #7Sigma SD1
Guys, there is now a specific thread topic for Sigma lens and mount adapters so we can keep all this info in one place and not scattered about.

https://www.fredmiranda.com/forum/topic/941741

You will find the first link there answers most of your OM questions.
Sep 30, 2010 at 09:29 AM
Rob Riley
Offline
Details
p.9 #8Sigma SD1
Ive never seen an SA/OM adapter, but ok you made me look and i came across this
http://www.foto.nordjylland.biz/SD14/SD14-NonSigmaLenses.htm
Sep 30, 2010 at 09:29 AM
veroman
Offline
Details
p.9 #9Sigma SD1
Paul Yi wrote:
Just think about it....
Why would Leica M9 use the Kodak sensor?....


I don't think the M9 uses the sensor that was in the SLR/c or SLR/n. Those sensors were outsourced by Kodak to an outfit called the Film Factory, or something like that. The sensor in the M9 is made by Kodak, but it's not the same design as the full frame sensors used in your camera.

- Steve
Sep 30, 2010 at 09:37 AM
Lotusm50
Offline
Details
p.9 #10Sigma SD1
veroman wrote:
Paul Yi wroteJust think about it....
Why would Leica M9 use the Kodak sensor?....
I don't think the M9 uses the sensor that was in the SLR/c or SLR/n. Those sensors were outsourced by Kodak to an outfit called the Film Factory, or something like that. The sensor in the M9 is made by Kodak, but it's not the same design as the full frame sensors used in your camera.



Right. Except name of the company that made sensor in the SLR/n was the "Fill Factory", which was acquired by Cypress Semiconductor. I believe Cypress still lists that sensor, or a direct decedent from it.

Sep 30, 2010 at 10:02 AM
desinteresadam
Offline
Details
p.9 #11Sigma SD1
Tariq Gibran wrote:
desinteresadam wrotewill this sensor clip the reds as i saw on the sd14 versus nikon d 200 comparison? what are your thoughts?
It should not as the True II processor in the most current Sigma's are said not to have the red clip issue.

thanks for the info
Sep 30, 2010 at 01:42 PM
Alf Beharie
Offline
Details
p.9 #12Sigma SD1
Jorgen Udvang wrote:
Since the flange distance is the same as on a Canon, it must be possible to make an adapter for Zeiss CY lenses, right? Or change the mount on Contax N lenses to SD mount? Right?


C/Y mount lenses can be converted to SA mount but they vary greatly in their conversion difficulty. I converted the 50mm f1.7 Planar T* to PK mount (which also fits the SA mount), but the aperture mechansim is rediculously complicated and it was the hardest conversion I have done.
Conversely, the 85mm f1.4 Planar T* is an absolute doddle to convert...If fact of all my lens conversions it was probably the easiest.
Contax N is a different ballgame.
Sep 30, 2010 at 02:00 PM
Alf Beharie
Offline
Details
p.9 #13Sigma SD1
trdonja wrote:
Alf Beharie wroteEF lenses converted to SA mount retain all features except IS, for those lenses that have it.
The lenses are permanently converted and can't be used with EF anymore?


Yes, the conversion is reversable, providing you keep all the bits you remove.


Sep 30, 2010 at 02:04 PM
Rob Riley
Offline
Details
p.9 #14Sigma SD1
another way to do it is to junk an EOS body by removing the mount, and resoldering the electrical connections onto the the Sigma body (which are in a different order). Then you can take EOS lenses onto the Sigma and theyre still usable on your Canon bodies.
Sep 30, 2010 at 02:09 PM
Daniel Heineck
Offline
Details
p.9 #15Sigma SD1
Lotusm50 wrote:
veroman wrote
Paul Yi wroteJust think about it....
Why would Leica M9 use the Kodak sensor?....
I don't think the M9 uses the sensor that was in the SLR/c or SLR/n. Those sensors were outsourced by Kodak to an outfit called the Film Factory, or something like that. The sensor in the M9 is made by Kodak, but it's not the same design as the full frame sensors used in your camera.
Right. Except name of the company that made sensor in the SLR/n was the "Fill Factory", which was acquired by Cypress Semiconductor. I believe Cypress still lists that sensor, or a direct decedent from it.



Kodak is a design house for most of the imaging chips it sells--someone else makes them (gone through a few companies, DALSA, Cypress, etc). They make other items in house, though.
Sep 30, 2010 at 02:12 PM
Jorgen Udvang
Offline
Details
p.9 #16Sigma SD1
Alf Beharie wrote:
Jorgen Udvang wroteSince the flange distance is the same as on a Canon, it must be possible to make an adapter for Zeiss CY lenses, right? Or change the mount on Contax N lenses to SD mount? Right?
C/Y mount lenses can be converted to SA mount but they vary greatly in their conversion difficulty. I converted the 50mm f1.7 Planar T* to PK mount (which also fits the SA mount), but the aperture mechansim is rediculously complicated and it was the hardest conversion I have done.
Conversely, the 85mm f1.4 Planar T* is an absolute doddle to convert...If fact of all my lens conversions it was probably the easiest.
Contax N is a different ballgame.


This is interesting. I own the 85mm f/1.4, and it's a great lens. Is the process of converting it available anywhere online?
Sep 30, 2010 at 04:12 PM
phidong
Offline
Details
p.9 #17Sigma SD1
Alf Beharie wrote:
Contax N is a different ballgame.

It's interesting.. technically you should be able to convert the mount on the sigma body to N mount and retain all AF. Depending on the price of the camera and skills it might be the cheapest way to use the full line of contax N lenses.. there are a lot of gaps in the N lineup though
Sep 30, 2010 at 09:47 PM
Alf Beharie
Offline
Details
p.9 #18Sigma SD1
Jorgen Udvang wrote:
Alf Beharie wrote
Jorgen Udvang wroteSince the flange distance is the same as on a Canon, it must be possible to make an adapter for Zeiss CY lenses, right? Or change the mount on Contax N lenses to SD mount? Right?
C/Y mount lenses can be converted to SA mount but they vary greatly in their conversion difficulty. I converted the 50mm f1.7 Planar T* to PK mount (which also fits the SA mount), but the aperture mechansim is rediculously complicated and it was the hardest conversion I have done.
Conversely, the 85mm f1.4 Planar T* is an absolute doddle to convert...If fact of all my lens conversions it was probably the easiest.
Contax N is a different ballgame.
This is interesting. I own the 85mm f/1.4, and it's a great lens. Is the process of converting it available anywhere online?


I did'nt publish a conversion tutorial but basically you swap the C/Y mounting plate for a Sigma SA plate...There is no machining to do except the usual drilling securing holes...The C/Y mounting plate on the 85/1.4 is exactly the same diameter as an SA mounting plate so the SA plate fits on nicely. Then using the C'Y plate as a template you drill four new holes in the SA plate and contersink them, add the original Contax screws and your in business.
Sep 30, 2010 at 10:01 PM
Jorgen Udvang
Offline
Details
p.9 #19Sigma SD1
Alf Beharie wrote:
I did'nt publish a conversion tutorial but basically you swap the C/Y mounting plate for a Sigma SA plate...There is no machining to do except the usual drilling securing holes...The C/Y mounting plate on the 85/1.4 is exactly the same diameter as an SA mounting plate so the SA plate fits on nicely. Then using the C'Y plate as a template you drill four new holes in the SA plate and contersink them, add the original Contax screws and your in business.


That sounds almost too good to be true. What about the register distance. Will that be correct as well? Does Sigma sell mounting plates, or will I have to cannibalize a lens? Will it work on other lenses too, like the 35-70 or the 135mm f/2.8?
Oct 01, 2010 at 05:05 AM
Alf Beharie
Offline
Details
p.9 #20Sigma SD1
IDURITA wrote:
Are there OM to Sigma adapters ?


Not anymore. Years ago Sigma used to make an interchangable lensmount system, very similar but not the same as the T2-mount. They called it the Y/S mount and several other brand names were associated with it. I was lucky enough to find an M42-Y/S mount adapter for my Sigmatel Multi Scalmatic 135mm f1.8 so I could use it on my SD10 and SD14 via an M42-SA adapter.
Oct 01, 2010 at 01:28 PM
FM ForumsLeica & Alternative GearJoin Upload & Sell
  
 

You are not logged inLog inRegister