fredmiranda.com Login
This topic is in the 2010 archive. You can read it and like its posts here. It is read only.

Archive 2010MF Screen Calibration

  
 
jotdeh
Offline
Details
p.3 #1MF Screen Calibration
Oh, I have had no problem removing the screen... the shims / washers are tricky though, I find. Now on to the second attempt, wish me luck
Jun 16, 2010 at 10:14 AM
jotdeh
Offline
Details
p.3 #2MF Screen Calibration
Ok, it's actually not so hard once I knew what to do:
http://shimworld.wordpress.com/2009/08/24/cleaning-the-5d-mk-ii-viewfinder/
MUST remove the front plate with the foam pads - didn't know and hence was trying to squeeze the shims past them, which bent them.

Paul you're on a 5D Mark 1, right? It seems to be different there, no need to remove anything...
Jun 16, 2010 at 11:41 AM
cogitech
Offline
Details
p.3 #3MF Screen Calibration
That's very good info. I had no idea about the MKII. I had to do that on my 20D, too.
Jun 16, 2010 at 12:00 PM
janshim
Offline
Details
p.3 #4MF Screen Calibration
jotdeh wrote:
Ok, it's actually not so hard once I knew what to do:
http://shimworld.wordpress.com/2009/08/24/cleaning-the-5d-mk-ii-viewfinder/
MUST remove the front plate with the foam pads - didn't know and hence was trying to squeeze the shims past them, which bent them.


As per the warning in my tutorial, when you attempt to remove the front plate, make sure you are able to secure the plate with some kind of tool and careful ease it out of the chamber. The plate has sharp edges and dropping it may result in a scratched focusing screen or mirror (if you had the screen removed first). Speaking from personal experience here, scratched the screen and since then have a low opinion of magnetized screw drivers Unfortunately you need them to conveniently and securely remove the micro screws. Just that when the plate accidentally gets dragged along with it and mid way loses its hold, bad things can happen!

Edited on Jun 17, 2010 at 03:15 AM · View previous versions
Jun 16, 2010 at 06:12 PM
jotdeh
Offline
Details
p.3 #5MF Screen Calibration
Thanks for the heads up, Jan! I didn't have any trouble now, but I got tons of dust in my viewfinder, not to speak of that massive scratch on the screen - but gotta live with it for a while, as Canon Singapore is out of stock on the Eg-S until some time in July

Proper cleaning to be scheduled...
Jun 17, 2010 at 02:18 AM
FM ForumsLeica & Alternative GearJoin Upload & Sell
  
 

You are not logged inLog inRegister