nikonem wrote
Thanks. This is very interesting. I've been considering a Photo Clam PC-44 but this head is intriguing. My only concern is how it compares to the Photo Clam, or other heads in this class with a separate tension control, when it comes to adjusting the camera/lens within that sweet spot where you don't have to hold on to the camera to keep it from flopping around.
the difference is something you have to feel. Because there is naturally more dampening applied to the Arca-Swiss heads with aspherical balls you probably have more control. It isn't like the tension control ring is binary - either locked or floppingly loose -- the combination of the load on the head plus the progressive tensioning mechanism let's you micro control the movement based on how much weight the A-S heads are supporting at the moment. Based on my experience with the A-S B1 and B2 Monoballs if you have a seperate minimum tension setting you end up having to readjust that each time you change lenses or cameras. In practice this tends to be something you set for the lightest camera & lens combo you normally use and just use the main control for every day use. With the p0 this isn't a concern as so far as I can tell, the tensioning mechanism is automatically handling different loads.
My guess is the larger p1 A-S head has a separate minimum tensioning control as is more designed for large format view camera users where that really is a useful feature in my experience. Monorail view cameras not only tend to be a bit heavier than most 35mm based DSLRs and common focal lengths but also have the loads and stresses further away from the fulcrum point.