fredmiranda.com Login
This topic is in the 2007 archive. You can read it and like its posts here. It is read only.

Archive 2007New 1D MKIII "blue dot"

  
 
Mark Powell
Offline
Details
p.6 #1New 1D MKIII "blue dot"
James,
Dude...you can test the weather sealing at the same time you test the AI Servo focusing. Just go stand in the rain and take pictures of the traffic as it comes towards you.

Take one for the team..... :-)
Nov 14, 2007 at 02:56 PM
JackCnd
Offline
Details
p.6 #2New 1D MKIII "blue dot"
Canon has just updated the issue range, they exempted about 3500 camera serials that are within the range but "post countermeasure."

Probably those blue dot boxes people have received yet with cameras within the serial issue range. I'm sure dealers complained they would be hard to sell.

http://www.canon.com.au/support/customer/default.asp?DXI=KnowledgeBase/Customer/KBArticleForm&File=KB01650&productID=eos1d_mark_III



Edited by JackCnd on Nov 15, 2007 at 03:52 PM GMT
Nov 15, 2007 at 04:43 PM
Alistair Watson
Offline
Details
p.6 #3New 1D MKIII "blue dot"
Interesting!

Sounds like the Canon chappies are still working hard then!
Nov 15, 2007 at 04:52 PM
ifxbonz
Offline
Details
p.6 #4New 1D MKIII "blue dot"
JackCnd wrote:
Canon has just updated the issue range, they exempted about 3500 camera serials that are within the range but "post countermeasure."

Probably those blue dot boxes people have received yet with cameras within the serial issue range. I'm sure dealers complained they would be hard to sell.

http://www.canon.com.au/support/customer/default.asp?DXI=KnowledgeBase/Customer/KBArticleForm&File=KB01650&productID=eos1d_mark_III



Edited by JackCnd on Nov 15, 2007 at 03:52 PM GMT


Thanks for the update notice......

my new MK3 is on that new list with and the Dot on the box, but I feel my camera is back focusing fairly frequently at least with mt 300 2.8 on it. BTW this is my 2nd MK3 the first one went back.

Andy
Nov 15, 2007 at 05:08 PM
BuLLets
Offline
Details
p.6 #5New 1D MKIII "blue dot"
Hey big jim, have you seen this yet Here's your definitive proof to back up what I said. And guess what it's from CANON!

http://www.canon.com.au/support/customer/default.asp?DXI=KnowledgeBase/Customer/KBArticleForm&File=KB01650&productID=eos1d_mark_III

How to identify affected products:

If the serial number on the bottom of the camera is between 501001 and 546561, it could be affected by the “AF mirror adjustment issue", with exception of the serial numbers click here which are post-counter measure products.

How's that crow taste now jim

Jim Victory wrote:
BuLLets wroteAnything with OV1005 production code has the fix applied on the assembly run. Not bench fixed. What has happened here is Canon checked their serial numbers and gave out a range where their highest number was last produced in a non-fixed production run. Hence they come up with 546561. As most of us know for some odd reason Canon doesn't do serial numbers sequentially. There are bodies produced in Aug that have serial numbers in the 503XXX range, that were also produced in May. They are still assembling bodies after 546561 with serial numbers below 546561. Hence the reason some under 54651 have the same production code as bodies over 546561. I'd love to find out the reason Canon can't keep bodies in sequential order.
This is merely an assumption by you and unless you have some definitive proof to back it up from Canon , or someone who actually knows for sure, it means nothing. Just another guess about what is going on and not supported by any definitive documentation.

Jim

Nov 15, 2007 at 05:16 PM
BuLLets
Offline
Details
p.6 #6New 1D MKIII "blue dot"
Just like I've been saying for about a week now. I'm glad Canon decided to say it as well.


ifxbonz wrote:
JackCnd wroteCanon has just updated the issue range, they exempted about 3500 camera serials that are within the range but "post countermeasure."

Probably those blue dot boxes people have received yet with cameras within the serial issue range. I'm sure dealers complained they would be hard to sell.

http://www.canon.com.au/support/customer/default.asp?DXI=KnowledgeBase/Customer/KBArticleForm&File=KB01650&productID=eos1d_mark_III



Edited by JackCnd on Nov 15, 2007 at 03:52 PM GMT
Thanks for the update notice......

my new MK3 is on that new list with and the Dot on the box, but I feel my camera is back focusing fairly frequently at least with mt 300 2.8 on it. BTW this is my 2nd MK3 the first one went back.

Andy

Nov 15, 2007 at 05:19 PM
BuLLets
Offline
Details
p.6 #7New 1D MKIII "blue dot"
Nov 15, 2007 at 05:58 PM
JackCnd
Offline
Details
p.6 #8New 1D MKIII "blue dot"


my new MK3 is on that new list with and the Dot on the box, but I feel my camera is back focusing fairly frequently at least with mt 300 2.8 on it. BTW this is my 2nd MK3 the first one went back.



Did you try the focus offset adjustment the III has?
Nov 15, 2007 at 06:28 PM
ifxbonz
Offline
Details
p.6 #9New 1D MKIII "blue dot"
JackCnd wrote:
Earlier quotemy new MK3 is on that new list with and the Dot on the box, but I feel my camera is back focusing fairly frequently at least with mt 300 2.8 on it. BTW this is my 2nd MK3 the first one went back.
Did you try the focus offset adjustment the III has?


I plan on working on that in the morning with several lenses, but I will still send it in for bench calibration. In the future I will use the focus offset adjustment for fine tuning on individual assignments where a little front or back focus can be a useful tool.

Andy
Nov 15, 2007 at 07:50 PM
SLD
Offline
Details
p.6 #10New 1D MKIII "blue dot"
I am glad to know the 545xxx OV1005 , with Blue Dot was fixed from production line b/c i sold it, otherwise i would feel bad

BuLLets wrote:
Hey big jim, have you seen this yet Here's your definitive proof to back up what I said. And guess what it's from CANON!

http://www.canon.com.au/support/customer/default.asp?DXI=KnowledgeBase/Customer/KBArticleForm&File=KB01650&productID=eos1d_mark_III

How to identify affected products:

If the serial number on the bottom of the camera is between 501001 and 546561, it could be affected by the “AF mirror adjustment issue", with exception of the serial numbers click here which are post-counter measure products.

How's that crow taste now jim

Jim Victory wrote
BuLLets wroteAnything with OV1005 production code has the fix applied on the assembly run. Not bench fixed. What has happened here is Canon checked their serial numbers and gave out a range where their highest number was last produced in a non-fixed production run. Hence they come up with 546561. As most of us know for some odd reason Canon doesn't do serial numbers sequentially. There are bodies produced in Aug that have serial numbers in the 503XXX range, that were also produced in May. They are still assembling bodies after 546561 with serial numbers below 546561. Hence the reason some under 54651 have the same production code as bodies over 546561. I'd love to find out the reason Canon can't keep bodies in sequential order.
This is merely an assumption by you and unless you have some definitive proof to back it up from Canon , or someone who actually knows for sure, it means nothing. Just another guess about what is going on and not supported by any definitive documentation.

Jim

Nov 15, 2007 at 08:35 PM
Jim Victory
Offline
Details
p.6 #11New 1D MKIII "blue dot"
BuLLets wrote:
Hey big jim, have you seen this yet Here's your definitive proof to back up what I said. And guess what it's from CANON!

http://www.canon.com.au/support/customer/default.asp?DXI=KnowledgeBase/Customer/KBArticleForm&File=KB01650&productID=eos1d_mark_III

How to identify affected products:

If the serial number on the bottom of the camera is between 501001 and 546561, it could be affected by the “AF mirror adjustment issue", with exception of the serial numbers click here which are post-counter measure products.

How's that crow taste now jim



What crow?

At the time I made that statement there was no definitive proof and now there is. So whats your point other than acting like an ass?

I never made a claim to know anything more than Canon had told us at the time. Now they have chose to share more information to clarify the issue.

You claims were based on your assumption rather than fact and now the facts support your assumptions. Do you want a pat on your head?

I would be eating crow if I had made assumptions and they were not backed by facts. I never made any assumptions beyond what Canon had provided in their bulletin.

Jim

Nov 15, 2007 at 09:19 PM
Normcar21
Offline
[X]
Details
p.6 #12New 1D MKIII "blue dot"
This is turning into a comedy and canon is now joining the satire
Nov 15, 2007 at 09:46 PM
BuLLets
Offline
Details
p.6 #13New 1D MKIII "blue dot"
Jim, the only one who was acting the 'ass' was you. This is the internet and we are very lucky to have gotten the 'proof' to satisfy your extremely high level of disbelief. I'm glad it came about and we can all sleep happy thoughts. Now when you get your sub 546561 body, just pack it up and send it back like you said you would. Just remember now, like I've said over and over, it's all about the production code!

Jim Victory wrote:
I also don't agree that the date code of OV1005 means it was produced with the manufacturing update of the fix. I believe only those with a serial number outside of 546561 can be trusted. Mine goes back if it isn't outside of that serial number whether it has a blue dot or not. I just don't trust Canon enough beyond their admission of the effected serial numbers.
Nov 15, 2007 at 09:46 PM
chaud
Offline
Details
p.6 #14New 1D MKIII "blue dot"
Blue dot, pink dot...whatever. All I want to know is are the "fixed bodies" actually FIXED? Can anyone, who has received a fixed body, have tested it and found the focusing issue is still a problem?

My dealer called me yesterday and has a "replacement body" for me to pick up this afternoon. I want to be able to check the serial number and be comfortable knowing that when I take the new body home it will work as intended.

EDIT: Collected the new camera today and am now charging the battery. It has a serial number that is in the range of problem cameras but is on the "exemption" list that is provided in this previously posted link.

Fred
Nov 28, 2007 at 10:45 AM
FM ForumsCanon ForumJoin Upload & Sell
  
 

You are not logged inLog inRegister