fredmiranda.com Login
This topic is in the 2007 archive. You can read it and like its posts here. It is read only.

Archive 2007'Official' Post-PMA Discussion thread

  
 
brainiac
Offline
[X]
Details
p.8 #1'Official' Post-PMA Discussion thread
14 bit, Digic III and wider micro-lenses mean it should do better than a 1Ds2 frame cropped down to 10 megapixels. The AA filter may affect this, but for pure resolving power the 1DsII should still win when taking the same picture. However resolving power isn't the only measure: the tone and low noise of the iii count for a lot.
Feb 25, 2007 at 05:40 AM
Ola H.
Offline
Details
p.8 #2'Official' Post-PMA Discussion thread
The 1DsIII will be here soon. Just think of the release of the 1DIII as a rumour about what feautures on the new Ds will be like (a rumour that is actually true).
Feb 25, 2007 at 05:44 AM
Tentacle
Offline
Details
p.8 #3'Official' Post-PMA Discussion thread
brainiac wrote:
14 bit, Digic III and wider micro-lenses mean it should do better than a 1Ds2 frame cropped down to 10 megapixels. The AA filter may affect this, but for pure resolving power the 1DsII should still win when taking the same picture. However resolving power isn't the only measure: the tone and low noise of the iii count for a lot.


How can the resolving power differ if the pixel pitch is the same for the 1DsII and the 1D III A 1DIII sensor (crop 1.281x) upscaled to FF would net 16.58 mpixel. Close enough to make no difference. Am I missing something?
Feb 25, 2007 at 05:55 AM
John Power
Offline
Details
p.8 #4'Official' Post-PMA Discussion thread
You need to correct your thread title spelling.
Feb 25, 2007 at 06:59 AM
EB-1
Offline
Details
p.8 #5'Official' Post-PMA Discussion thread
Yes, it sucks. The options are to wait or buy other manufacturer's gear. Unfortunately there is little competition, so very few choices.

EB
Feb 25, 2007 at 07:08 AM
AGeoJO
Online
Details
p.8 #6'Official' Post-PMA Discussion thread
Derek,
I hear you as I was hoping for the 1Ds MkIII at the PMA as well but it certainly looks that we have to wait somewhat longer now. Oh, well. BTW, are you still using the same 1Ds body you bought from me over two years ago?
Feb 25, 2007 at 07:26 AM
Monito
Offline
Details
p.8 #7'Official' Post-PMA Discussion thread
Canon doesn't owe us a thing. Our cameras did not begin to malfunction as result of PMA announcements or non-announcements.

Frankly I am thrilled with the 1D3 even though I expect I will never buy it. Clearly a huge amount of thought and development went into it and that confirms my faith in Canon. There are many features that bode well for the 1Ds3 and a 5D successor, two cameras I am vitally interested in.

[Why is this thread not merged into the post-PMA thread?]
Feb 25, 2007 at 07:27 AM
johnastovall
Offline
Details
p.8 #8'Official' Post-PMA Discussion thread
dhphoto wrote:
I think it is purely a question of profit.

It takes an enormous amount of money to design and retool for a new model and a high end model will be very expensive and sell a lot less than a 400D

By making the 1D3 Canon have leapt ahead of Nikon in the eyes of most photographers but they seem to feel that the really high end camera can wait. I think it is just economies of scale - they will sell a lot more 1D3's than they will 1DsIII's

It will come, in the mean time for the stuff you do a
...Show more →

They've already done the design and retooling for the 1Ds you see that in the 1DMkIII. It's just question of tweeking firmware and the sensor bits.

Feb 25, 2007 at 07:36 AM
dhphoto
Offline
Details
p.8 #9'Official' Post-PMA Discussion thread
johnastovall wrote:
They've already done the design and retooling for the 1Ds you see that in the 1DMkIII. It's just question of tweeking firmware and the sensor bits.



Some of the parts are no doubt interchangeable but others like the viewfinder, mirror assembly, VF prism, screens, focusing system will have to be made/adapted especially for the new 1Ds series, a costly undertaking

David
Feb 25, 2007 at 07:59 AM
Yakim Peled
Offline
Details
p.8 #10'Official' Post-PMA Discussion thread
Bit late to join the party?

1. I am extremely happy with the Mk III. As a 1D (Mk I) owner it is the fulfillment of all my dreams and wishes. It's as if someone at Canon heard my thoughts and made them come true. Now to the problematic part, to save for it......

2. If indeed the 16-35 Mk II is indeed significantly better than the 17-40/4 and as flare resistant as it, I'll start saving for it as well.

3. Whatever came of the Erwin and Erwin S? Vaporware?
Feb 25, 2007 at 08:35 AM
gpfmartin
Offline
Details
p.8 #11'Official' Post-PMA Discussion thread
When you find it impossible to improve on your equipment, improve upon your skills.
Feb 25, 2007 at 08:56 AM
Paul Schmidt
Offline
Details
p.8 #12'Official' Post-PMA Discussion thread
Atlasman2 wrote:
Tentacle wrote
Atlasman2 wrote[...]

I fail to see any logic in dropping the EF-S line. Smaller means greater portability, and as sensor technology improves, the 1.6 crop will become even more compelling. I just hope that Canon ups the build quality to "L" standards on the EF-S line.
EF-S will not be dropped. It will, eventually, be relegated to entry level. IF Canon sticks to its commitment to full frame. Since the introduction of EF-S, along with the 300D in august 2003, we've seen 6 EF-S lenses, 3 of them kit-lenses. Even the most expensive EF-S, the very nice 17-55/2.8IS, is cheaper than a 135L, so it's not that massive amounts of glass-investments will go down the drain.

And if you want to know why Canon thinks full frame is so much better, then google for Canon Full Frame White Paper and read it, while keeping in mind that it's part fact, and part PR.
In my neck of the woods, the 17-55 is $1400 and the 135L is $1100—that Canon has made available the 17-55 tells me that their plan is to bolster the line-up with high end type glass.

Regarding the FF, I own the 5D and have 1st hand experience with the merits of this format. As a professional photographer, I use, and continue to use both the 1.6 and FF formats—as the shooting conditions require.

Just as in my film days, I used MF and 35mm as required, today, digital enables FF (5D) has replaced my MF equipment (at least for the
...Show more →

For most consumers and many prosumers, who never print larger then 8x12, 8MP is sufficient for a nice, high quality print. So a 10MP APS-C sensor, is probably fine, for consumer "Rebel" like cameras. For prosumers and photojournalists, the next level up, a 14MP APS-H would probably be sufficient, and a 22MP full frame would be fine for the majority of the rest of shooters. If you really want more, Hassy has a $30K digital MF back at 39MP, would Canon move into that territory, or simply buy an existing MF camera maker, to add that capability.





Feb 25, 2007 at 09:09 AM
AGeoJO
Online
Details
p.8 #13'Official' Post-PMA Discussion thread
gpfmartin wrote:
When you find it impossible to improve on your equipment, improve upon your skills.


Yes, I agree to a certain degree but have you seen Derek's galleries though ? Not much skill improvement is needed, if any.
Feb 25, 2007 at 09:22 AM
Dave MC
Offline
Details
p.8 #14'Official' Post-PMA Discussion thread
D. von Briesen wrote:
As a fine arts landscape photographer I constantly compete with medium and large format film shooters and I've been anxiously awaiting Canon's 1Ds upgrade.


Well if higher res files worry you, for the price you'd pay for what you are hoping Canon might announce later you can buy a 4x5 camera with all the accessories right now. Judging from your galleries you obviously know your way around a camera. Anyways, just an option.

Dave
Feb 25, 2007 at 09:36 AM
gpfmartin
Offline
Details
p.8 #15'Official' Post-PMA Discussion thread
Yes, I agree to a certain degree but have you seen Derek's galleries though ? Not much skill improvement is needed, if any.

Better photos than mine? Yes. Better than he can do? No. There's always room for improvement.
Feb 25, 2007 at 09:39 AM
danmitchell
Offline
Details
p.8 #16'Official' Post-PMA Discussion thread
A slightly snarky remark was posted: "When you find it impossible to improve on your equipment, improve upon your skills."

But if your skills are quite good you will likely be able to take advantage of better equipment to produce even better technical results.

Working to "improve upon your skills" is not the alternative to using good gear. In an artistic medium that relies so heavily on technology, one must keep the "skills" and the technology in balance.

In general a really good photographer strives to develop the best skills (and vision, etc.) using the best and most appropriate technology available.

Edited by danmitchell on Feb 25, 2007 at 03:48 PM GMT
Feb 25, 2007 at 09:49 AM
AGeoJO
Online
Details
p.8 #17'Official' Post-PMA Discussion thread
gpfmartin wrote:
Earlier quoteYes, I agree to a certain degree but have you seen Derek's galleries though ? Not much skill improvement is needed, if any.
Better photos than mine? Yes. Better than he can do? No. There's always room for improvement.


Derek is looking for more tonal gradations, decrease in shadow noise, increase in dynamic range and of course, increase in resolution. Just by getting all those features in a new camera, he would improve his future images by quite a bit. I believe he is pushing the envelope of his 1Ds MarkII already. Room for improvement on his skill? Yeah, always but that has to do more with catching the perfect lighting conditions and certain circumstances by being there more frequently. I couldn't figure out how else, could you?
Feb 25, 2007 at 09:58 AM
jerryrock
Offline
Details
p.8 #18'Official' Post-PMA Discussion thread
What is it that you are looking for? Full frame, more pixels? Why does the Mark III disapoint you?
Feb 25, 2007 at 10:16 AM
MX5NC
Offline
Details
p.8 #19'Official' Post-PMA Discussion thread
I thought Nikon had overtaken Canon in unit sales for the first time in 20 years -- at least I recall reading that?? I still use Nikon and Canon kit ... but if I wanted more IQ - I'd buy a Big H with a third party digital back. (OKay I'm ducking the triple A ;-))

I'm rather sad there was no Mark II 100-400 or indeed a 400/5.6 IS but then we can't everything we want ;-(
Feb 25, 2007 at 10:19 AM
madmax200
Offline
Details
p.8 #20'Official' Post-PMA Discussion thread
Canon PLEASE increase the dynamic range........PLEASE!

Blown highlights is my nemesis. Also fix the shadow problem if you can. Oh and thanks for waiting on the release it allows me to remodel my house.
Feb 25, 2007 at 10:31 AM
FM ForumsCanon ForumJoin Upload & Sell
  
 

You are not logged inLog inRegister