So I have the 600f4 and 300gm and have used them for quite a while now, especially the 600gm. I recently purchased the 600 6.3 and really like the lens overall. Having said that, I took it out at daybreak today and noticed right away in low light there is a considerable delay in initial focus acquisition. I’m talking close to if not a full second for the box to turn green. I understand it’s a 6.3 and know there’s going to be limitations with what it can do in these situations. I had the 200-600 for several years and it never exhibited this behavior being a 6.3 as well. In good light it’s really fast and accurate, nearly as quick as the 300gm. It’s almost like it needs a firmware update or something minor tweaked possibly with camera firmware. Anyhow I did some very controlled testing in my home today with a stopwatch. If you put the subject in a well lit part of the room in the corner the initial acquisition is nearly instant. If you move that same subject to the other corner which is the same distance but darker, the initial lock is double the time and sometimes a hair more. ISO was 800 vs 4000 in this testing which certainly isn’t that high for wildlife work. I’ve searched and asked a few people and have found a couple stating they’re experiencing similar issues. One of which is over on Backcountry gallery. Anyhow, I’d like to hear from anyone on here that has noticed this. I am contemplating calling Sony tomorrow to see if there’s any reports of this.
olalafoto wrote:
Hey everyone! For those who already got their hands on the lens, where was yours made? I heard there are multiple manufacturing origins, but haven't seen any confirmation yet, wanted to see if that's true.
The 600 lenses sold in the US are all made in Japan to minimize impact of tariffs.
Q111H wrote:
So I have the 600f4 and 300gm and have used them for quite a while now, especially the 600gm. I recently purchased the 600 6.3 and really like the lens overall. Having said that, I took it out at daybreak today and noticed right away in low light there is a considerable delay in initial focus acquisition. I’m talking close to if not a full second for the box to turn green. I understand it’s a 6.3 and know there’s going to be limitations with what it can do in these situations. I had the 200-600 for several years and it never exhibited this behavior being a 6.3 as well. In good light it’s really fast and accurate, nearly as quick as the 300gm. It’s almost like it needs a firmware update or something minor tweaked possibly with camera firmware. Anyhow I did some very controlled testing in my home today with a stopwatch. If you put the subject in a well lit part of the room in the corner the initial acquisition is nearly instant. If you move that same subject to the other corner which is the same distance but darker, the initial lock is double the time and sometimes a hair more. ISO was 800 vs 4000 in this testing which certainly isn’t that high for wildlife work. I’ve searched and asked a few people and have found a couple stating they’re experiencing similar issues. One of which is over on Backcountry gallery. Anyhow, I’d like to hear from anyone on here that has noticed this. I am contemplating calling Sony tomorrow to see if there’s any reports of this. ...Show more →
If you have a 2X TC, it would be worth checking how the 300 with 2X compares in this af test vs. the 600 f4 and 600 6.3. What was your shutter speed for this test?
The 300 2X is much faster than the new 600 when this happens. During the test I was at 1/400th but on a tripod indoors. I had it out right after daybreak again today and did find removing the hood helped noticeably but that's just allowing more light to hit the front element. About an hour after sunrise it works fine lol but in low light it is indeed very slow.
Q111H wrote:
The 300 2X is much faster than the new 600 when this happens. During the test I was at 1/400th but on a tripod indoors. I had it out right after daybreak again today and did find removing the hood helped noticeably but that's just allowing more light to hit the front element. About an hour after sunrise it works fine lol but in low light it is indeed very slow.
Interesting. End of the day the 300+2X is letting in about 33% more light, so it should cross that threshold of ‘enough light for af to work properly’ earlier in the morning. If there is somewhere near you to test another 6.3 copy or a 200-600 side-by-side, that might give you a better idea if it’s an issue with your copy rather than a normal inherent limitation.
MatthewK wrote:
Some shots from this mornings outing.
Nice shots Matthew! I've only seen a Limpkin twice and they were both really camera shy.
I went to the local park this afternoon in overcast conditions as the sun was starting to go down. I was able to get somewhat close to some Juncos when a motorcycle rode by and scared them away lol. If I had the 400 4.5 instead of the 600 6.3 with how much more I would have to crop, would that negate any advantage of the 4.5? I think the 6.3 does fine in the low light I've seen at least with respectable results for me.
Crop of the junco
ILCE-1FE 600mm F6.3 GM OSS lens600mmf/6.31/320s4000 ISO0.0 EV
Full frame of the junco showing how much I still had to crop, around 10 meters away
ILCE-1FE 600mm F6.3 GM OSS lens600mmf/6.31/320s4000 ISO0.0 EV
pdog109 wrote: MatthewK wroteSome shots from this mornings outing.Nice shots Matthew! I've only seen a Limpkin twice and they were both really camera shy.
I went to the local park this afternoon in overcast conditions as the sun was starting to go down. I was able to get somewhat close to some Juncos when a motorcycle rode by and scared them away lol. If I had the 400 4.5 instead of the 600 6.3 with how much more I would have to crop, would that negate any advantage of the 4.5? I think the 6.3 does fine in the low light I've seen at least with respectable results for me.
Moral of the story is buy the 600 f4 if you can handle the weight and price, forget all of the other lenses. Your bank account will show the results...
arbitrage wrote: pdog109 wroteMatthewK wroteSome shots from this mornings outing.Nice shots Matthew! I've only seen a Limpkin twice and they were both really camera shy.
I went to the local park this afternoon in overcast conditions as the sun was starting to go down. I was able to get somewhat close to some Juncos when a motorcycle rode by and scared them away lol. If I had the 400 4.5 instead of the 600 6.3 with how much more I would have to crop, would that negate any advantage of the 4.5? I think the 6.3 does fine in the low light I've seen at least with respectable results for me.Yes, if you have to crop a 400mm image shot at f/4.5 to, or past, the FOV of the 600 then you lose the ISO advantage you got from the faster lens.
Pius Sullivan wrote:
Moral of the story is buy the 600 f4 if you can handle the weight and price, forget all of the other lenses. Your bank account will show the results...
lol yeah I had the 600f4 but I sold it to use 300+2x TC because I wanted to be out in nature more and not be sweaty trying to take the best possible picture. And I sold the 300+2x TC to use the 600 6.3 to further that even more.
Overcast day this morning, went to a new spot that I've never been to before. Good number of ducks were out there but they were real shy, taking off even though I would be 50+ meters away, so more environmental shots.
American Wigeon and Gadwall
ILCE-1FE 600mm F6.3 GM OSS lens600mmf/6.31/1000s3200 ISO0.0 EV
Ruddy Duck, with two egrets in the background, couldn't really get em.
ILCE-1FE 600mm F6.3 GM OSS lens600mmf/6.31/1000s5000 ISO0.0 EV
Bufflehead, haven't seen one in a while! This is my first TX Bufflehead.
ILCE-1FE 600mm F6.3 GM OSS lens600mmf/6.31/800s1000 ISO0.0 EV
Cinammon Teal
ILCE-1FE 600mm F6.3 GM OSS lens600mmf/6.31/800s1600 ISO0.0 EV
This White-crowned Sparrow was very accommodating though
ILCE-1FE 600mm F6.3 GM OSS lens600mmf/6.31/800s2500 ISO0.0 EV
Wanting to give my fingers some more room I looked into the 3rd party lens foot heights, there all pretty similar so nothing really could be gained, a few mm at most.
Lens foot heights in inches:
RRS LCF-101 = 1.4
Hejnar 300f2.8 = 1.26 (no knob or release lever, screws in)
Kirk LP-65 = 1.22
Leofoto SF-01 = 1.2
If someone could make a new lens foot for 400/600 that would be like 1.5in height that would great ahah.
I have the kirk foot so going to RRS wouldn't get me much, and the release lever seems likes its in the middle so it might hit my fingers? Anyway, I just decided to remove the chasing birds cover on the lens control part and apply some vinyl camo tape I had. I can now comfortably get my pointer and middle finger up in there to hold it better. Ring and pinky finger still a bit tight under the manual focus ring but its ok. I removed the manual focus ring cover to see if it made any difference and it didn't so i'll just keep it on.
Much more finger room without the lens control piece and removed 11 grams weight
Wearing thin gloves can still comfortably get fingers in there, with thicker cold weather gloves probably not though
pdog109 wrote:
Wanting to give my fingers some more room I looked into the 3rd party lens foot heights, there all pretty similar so nothing really could be gained, a few mm at most.
Lens foot heights in inches:
RRS LCF-101 = 1.4
Hejnar 300f2.8 = 1.26 (no knob or release lever, screws in)
Kirk LP-65 = 1.22
Leofoto SF-01 = 1.2
If someone could make a new lens foot for 400/600 that would be like 1.5in height that would great ahah.
I have the kirk foot so going to RRS wouldn't get me much, and the release lever seems likes its in the middle so it might hit my fingers? Anyway, I just decided to remove the chasing birds cover on the lens control part and apply some vinyl camo tape I had. I can now comfortably get my pointer and middle finger up in there to hold it better. Ring and pinky finger still a bit tight under the manual focus ring but its ok. I removed the manual focus ring cover to see if it made any difference and it didn't so i'll just keep it on....Show more →
The promediagear foot seems to have similar clearance to the Leofoto et al (less than RRS), but it is single dovetail and no latch so I find it a lot more comfortable. I don’t love the configuration of safety screws on the bottom though, not good for fluid heads.
Yeah I'm thinking none of you folks live in the North West part of the USA.... lol.
pdog109 wrote: Pius Sullivan wroteMoral of the story is buy the 600 f4 if you can handle the weight and price, forget all of the other lenses. Your bank account will show the results... lol yeah I had the 600f4 but I sold it to use 300+2x TC because I wanted to be out in nature more and not be sweaty trying to take the best possible picture. And I sold the 300+2x TC to use the 600 6.3 to further that even more.
Pius Sullivan wrote:
Yeah I'm thinking none of you folks live in the North West part of the USA.... lol.
I actually lived in Olympia WA for 5 years, had a Canon 500f4 for most of the time I was there and got the Sony 600f4 the last few months I was there. Point still stands, sure the big primes are great but with denoise being what it is these days, I'd rather crank ISO up and enjoy being outside more than lugging a big lens around. The quality of the pictures might decrease using a 600f6.3 vs a 600f4 but the quality of life increases.
Fair enough, If the lens is to heavy then you made the right choice.
pdog109 wrote: Pius Sullivan wroteYeah I'm thinking none of you folks live in the North West part of the USA.... lol.I actually lived in Olympia WA for 5 years, had a Canon 500f4 for most of the time I was there and got the Sony 600f4 the last few months I was there. Point still stands, sure the big primes are great but with denoise being what it is these days, I'd rather crank ISO up and enjoy being outside more than lugging a big lens around. The quality of the pictures might decrease using a 600f6.3 vs a 600f4 but the quality of life increases.
The promediagear foot seems to have similar clearance to the Leofoto et al (less than RRS), but it is single dovetail and no latch so I find it a lot more comfortable. I don’t love the configuration of safety screws on the bottom though, not good for fluid heads.
birderbill1 wrote:
The promediagear foot seems to have similar clearance to the Leofoto et al (less than RRS), but it is single dovetail and no latch so I find it a lot more comfortable. I don’t love the configuration of safety screws on the bottom though, not good for fluid heads.
How do you get it tight on the lens?
Promediagear foot screws in, like the Hejnar, instead of quick release.