fredmiranda.com

Moderated by: Fred Miranda

New fredmiranda.com Mobile Site

New Feature: SMS Notification alert

New Feature: Buy & Sell Watchlist

FM Forums | Leica & Alternative Gear | Join Upload & Sell

1 2 3 4

6 7 end

Archive 2022 · Leica M 6 Bit Code Template

1bwana1
Offline
• • • • • •
Upload & Sell: On

p.5 #1 · Leica M 6 Bit Code Template

No problem Thomas your templates will go out tomorrow. Thanks for the tip!

Steve

Jun 06, 2022 at 03:49 PM

andybuk65
Offline
•
Upload & Sell: Off

p.5 #2 · Leica M 6 Bit Code Template

Hi Steve - if you have any of the templates left I'd be delighted to buy one, just what I've been looking for!
Many thanks,
Andy (PS. I'm also new so unable to PM)

Jun 09, 2022 at 09:22 AM

1bwana1
Offline
• • • • • •
Upload & Sell: On

p.5 #3 · Leica M 6 Bit Code Template

andybuk65 wrote:
Hi Steve - if you have any of the templates left I'd be delighted to buy one, just what I've been looking for!
Many thanks,
Andy (PS. I'm also new so unable to PM)

Andy,
I am happy to send you one. However, I am reluctant to post my PayPal address or my direct email on an open forum. Since you cannot PM yet, if you post your email, I will answer you with mine and we can make arrangements.

Thanks,

Steve

Jun 13, 2022 at 11:16 AM

DrThomasUttich
Offline
•
Upload & Sell: Off

p.5 #4 · Leica M 6 Bit Code Template

Hi Steve,

Mine just arrIved today and transformed my VM 35/1.7 and VM Apo 50mm 2.0 into Leica lenses.

Thank you for your great work.
Thomas

Jun 14, 2022 at 09:39 AM

1bwana1
Offline
• • • • • •
Upload & Sell: On

p.5 #5 · Leica M 6 Bit Code Template

Happy to hear it arrived safely and that it worked well for you Thomas. Enjoy!

-Steve-

Jun 14, 2022 at 10:30 AM

a m cole
Offline
•
Upload & Sell: Off

p.5 #6 · Leica M 6 Bit Code Template

Steve,

My templates have arrived. Thank you for all your work on this and I look forward to reading more about your Leica adventures.

Thanks,
Michael

Jun 14, 2022 at 03:48 PM

RoyLxGr_ne
Offline
•
Upload & Sell: Off

p.5 #7 · Leica M 6 Bit Code Template

Hi Steve,

I am pleased to make your acquaintance. Do you have any templates still available for purchase?
I would have one sent to my domestic US address.

Thank you kindly in advance,
Roy

Edited on Jun 15, 2022 at 12:18 AM · View previous versions

Jun 14, 2022 at 07:18 PM

1bwana1
Offline
• • • • • •
Upload & Sell: On

p.5 #8 · Leica M 6 Bit Code Template

RoyLxGr_ne wrote:
Hi Steve,

I am pleased to make your acquaintance. Do you have any templates still available for purchase?
I would have one sent to my US domestic APO address.

Thank you kindly in advance,
Roy

Roy,
Yes I still have a few sets. PM me and I will give you instructions on how to get one. Include your address in the PM.

Steve

Jun 14, 2022 at 10:29 PM

andybuk65
Offline
•
Upload & Sell: Off

p.5 #9 · Leica M 6 Bit Code Template

Thanks for the reply Steve, I'm at xxxxx

Jun 16, 2022 at 09:37 AM

andybuk65
Offline
•
Upload & Sell: Off

p.5 #10 · Leica M 6 Bit Code Template

Not sure you can see the email address, so writing it on 4 lines below,
andyrbrown
@
hotmail
.com

Jun 16, 2022 at 09:40 AM

EVIL_guy
Offline
•
Upload & Sell: Off

p.5 #11 · Leica M 6 Bit Code Template

Only one week from CA to Germany

Thanks a lot for your great idea and support, Steve!

Jun 19, 2022 at 06:48 AM

1bwana1
Offline
• • • • • •
Upload & Sell: On

p.5 #12 · Leica M 6 Bit Code Template

All,

I am currently in hospital and potentially facing some surgery due to an accident this past Saturday.

I beleive all orders were shipped prior to the accident. I do have some templates left and will be happy to send them once I am again able to. So keep PMing your requests. It just may be a little delayed getting them out.

Steve

Jun 19, 2022 at 08:12 PM

rscheffler
Offline
• • • • • •
Upload & Sell: Off

p.5 #13 · Leica M 6 Bit Code Template

Wishing you a speedy recovery, Steve!

Jun 19, 2022 at 09:28 PM

naturephoto1
Offline
• • • • • •
Upload & Sell: Off

p.5 #14 · Leica M 6 Bit Code Template

1bwana1 wrote:
All,

I am currently in hospital and potentially facing some surgery due to an accident this past Saturday.

I beleive all orders were shipped prior to the accident. I do have some templates left and will be happy to send them once I am again able to. So keep PMing your requests. It just may be a little delayed getting them out.

Steve

Steve,

Sorry for your accident. Hopefully you will have a full recovery, and back on your feet soon with no lasting effects.

Rich

Jun 19, 2022 at 09:41 PM

andybuk65
Offline
•
Upload & Sell: Off

p.5 #15 · Leica M 6 Bit Code Template

Really sorry to hear that Steve, get well soon. Thanks so much for the template you sent me which has safely arrived and is brilliant!

Jun 29, 2022 at 09:51 AM

panos.v
Offline
• • • •
Upload & Sell: Off

p.5 #16 · Leica M 6 Bit Code Template

FYI I used the image attached in the first page of this thread, printed it, cut it and then used one of these https://uniball.co.uk/brands/super-ink/uni-super-ink-permanent-marker-pna-125/ to just paint the code on my VM 35/1.4 II and 75/1.5 Works perfectly on my M246.

I'll see how long it lasts before rubbing off!

Dec 15, 2022 at 04:11 AM

taemo
Offline
• • •
Upload & Sell: On

p.5 #17 · Leica M 6 Bit Code Template

panos.v wrote:
FYI I used the image attached in the first page of this thread, printed it, cut it and then used one of these https://uniball.co.uk/brands/super-ink/uni-super-ink-permanent-marker-pna-125/ to just paint the code on my VM 35/1.4 II and 75/1.5 Works perfectly on my M246.

I'll see how long it lasts before rubbing off!

worked great for me too but will wait for the next batch of cardboard version from Steve so that I can do it better.
Bought a fine black satin pen at the arts store and have successfully 6-bit coded all my M lenses,
Modern Voigtlander lenses are definitely the easiest with recessed mount. Curious to see if the pain will eventually rub off my collapsible 50mm Summicron.

Feb 28, 2023 at 12:15 PM

SimonSPR
Offline
•
Upload & Sell: Off

p.5 #18 · Leica M 6 Bit Code Template

1bwana1 wrote:
All,

I am currently in hospital and potentially facing some surgery due to an accident this past Saturday.

I beleive all orders were shipped prior to the accident. I do have some templates left and will be happy to send them once I am again able to. So keep PMing your requests. It just may be a little delayed getting them out.

Steve

Steve

Just wondering if you still have these available ..... I've had to re-register so aren't able to PM directly

Thanks

Simon

Feb 28, 2023 at 02:16 PM

THEGRADUATE
Offline
•
Upload & Sell: Off

p.5 #19 · Leica M 6 Bit Code Template

I would also like to place an order... seems I am unable to PM.

Thanks,
Matt

Mar 01, 2023 at 10:34 AM

1bwana1
Offline
• • • • • •
Upload & Sell: On

p.5 #20 · Leica M 6 Bit Code Template

I am all out of templates right now. The guy who cuts them for me just had his first Grandchild, so he is up in Oregon helping take care of it. He says he will be back home for a visit soon. When he comes I will see if he can cut us another batch.

Watch this thread for when they are available again.

Steve

Mar 01, 2023 at 01:05 PM

1 2 3 4 5 6 7 end
FM Forums \| Leica & Alternative Gear \| Join Upload & Sell 1 2 3 4 5 6 7 end