I'm assuming insects? I'd look for actual images of said thing being photographed with the lens combo than what's going on in here for a more accurate representation. Also that lens has a dedicated thread on this board. Ask the people in there. Theodoric wrote: JadedWriter wroteWhat exactly would you be photographing that you think the MC105 wouldn't be able to handle it?Skittish wildlife for which every second counts.
I'm not so worried about the lens but about the camera hunting around and being unreliable when I need it to be on point.
RoamingScott wrote:
Don't be so defensive, my friend
I'm not defensive - just finding 'trainwreck' statement to be a bit overblown. Is it possible you're trying to spot meter highlights in a spot that's dark/uniform and has no highlights at all?
lukemeup wrote: RoamingScott wroteDon't be so defensive, my friend I'm not defensive - just finding 'trainwreck' statement to be a bit overblown. Is it possible you're trying to spot meter highlights in a spot that's dark/uniform and has no highlights at all?
Not quite sure you mean by "spot metering highlights". Highlight metering does not use any particular spot, nor does it care what you are focusing on.
What it does mean is that shadows are even darker than when in matrix...but as I said when testing AF-S, the darkness of the shadows does not appear to be the issue, from a sensor sensitivity/AF accuracy perspective.
I may be wrong but the 'highlight weighted' metering mode in Nikon measures the highlights in a specific spot - not the whole scene. so if you have selected that metering mode and point at a black hole in your hedge... I'd image it will have trouble to meter that spot.
Here's the last vid I'll post about this particular weirdness...AF-C and AF-S in the same vid. Used spot metering to prove the AF point thinks it's looking at a darker area (can see the entire frame brighten), so this isn't a "highlight metering" problem. Works sometimes (mostly doesn't) in AF-C, works every time in AF-S.
lukemeup wrote:
I may be wrong but the 'highlight weighted' metering mode in Nikon measures the highlights in a specific spot - not the whole scene. so if you have selected that metering mode and point at a black hole in your hedge... I'd image it will have trouble to meter that spot.
That's not how highlight metering works on any camera I've used, nor does it sound like the way Nikon engineered it. Highlight metering is basically the same as matrix/eval, but with automatic exposure comp to squish this brightest portion of the fame down to non-clipping levels.
You can test this by putting on a tripod and moving the AF box between light and dark areas with highlight metering on. Nothing about the frame changes by simply moving the AF box.
Good point. But if you highlight meter and you have something very bright in the scene - the exposure will automatically make the whole frame very dark (up to a point where the camera will have trouble focusing on the 'dark' part)? What happens if you flip to matrix metering?
It behaves a bit better in matrix. In the video above, spot metering should theoretically work the best, and the problem is still very obvious.
And, again, highlight metering with AF-S works with 100% accuracy, so the metering mode is not the culprit.
lukemeup wrote:
Good point. But if you highlight meter and you have something very bright in the scene - the exposure will automatically make the whole frame very dark (up to a point where the camera will have trouble focusing on the 'dark' part)? What happens if you flip to matrix metering?
Believe it or not I use matrix metering the most. I find the exposures are basically more consistent that way. At the very least spot isn't the mess that it is on Fuji with it metering in real time slowly right before your eyes depending on where the AF point is. RoamingScott wrote:
It behaves a bit better in matrix. In the video above, spot metering should theoretically work the best, and the problem is still very obvious.
And, again, highlight metering with AF-S works with 100% accuracy, so the metering mode is not the culprit.
lukemeup wroteGood point. But if you highlight meter and you have something very bright in the scene - the exposure will automatically make the whole frame very dark (up to a point where the camera will have trouble focusing on the 'dark' part)? What happens if you flip to matrix metering?
lukemeup wrote:
I'm not defensive - just finding 'trainwreck' statement to be a bit overblown.
I'm not sure I agree.
This is a current, top-of-the-line, expensive camera that straight up refused to focus in single point AF-C, a situation where my old D500 or even D5300 would have had no problem at all.
In my honest opinion, that's bordering on trainwreck territory.
Now please don't get me wrong, I'm not anti-Nikon. I actually want to go Z. But the AF situation just doesn't look pretty.
I'm still hoping for "that one firmware update" or "that one trick" to make the problems go away, but so far, no cigar.
Like I can drop loads of images from my Z6II where the AF works. The AF tech is different, don't ask me why the Z7II isn't doing what it should be doing, but when you're not shooting a test and just shooting the camera the thing works fine 90% of the time. Theodoric wrote: lukemeup wroteI'm not defensive - just finding 'trainwreck' statement to be a bit overblown.I'm not sure I agree.
This is a current, top-of-the-line, expensive camera that straight up refused to focus in single point AF-C, a situation where my old D500 or even D5300 would have had no problem at all.
In my honest opinion, that's bordering on trainwreck territory.
Now please don't get me wrong, I'm not anti-Nikon. I actually want to go Z. But the AF situation just doesn't look pretty.
I'm still hoping for "that one firmware update" or "that one trick" to make the problems go away, but so far, no cigar.
I have found different settings slow AF responsiveness. I’m no expert but I think it’s logical to believe this occurs because processor resources are pulled. One example is the apply settings to live view, however this setting is essential to be be left on if you want a mirrorless like experience. So I try to turn off everything else I don’t need or do in post, like the settings for vignette correction, ADL etc.
This isn’t an anecdotal opinion not scientific.
RoamingScott wrote: Buckeye2604 wroteTurn that off. It actually shouldn’t turn on in the scenario you tested.
RoamingScott wroteSure do.
Shotokan wroteDo you have option a11 (Low-Light AF) in the settings menu turned on?Not sure why I'd want that off, though. It's a feature that only works in AF-S according to Nikon, so clearly not the culprit of the AF-C weirdness.
The low light photography thing is something I just leave on. I was shooting an event (using AF-C) nothing was in focus, I menu dived turned it on and stuff started getting in focus again and I'm not menu diving again to switch it on and off. Buckeye2604 wrote:
I have found different settings slow AF responsiveness. I’m no expert but I think it’s logical to believe this occurs because processor resources are pulled. One example is the apply settings to live view, however this setting is essential to be be left on if you want a mirrorless like experience. So I try to turn off everything else I don’t need or do in post, like the settings for vignette correction, ADL etc.
This isn’t an anecdotal opinion not scientific.
RoamingScott wroteBuckeye2604 wroteTurn that off. It actually shouldn’t turn on in the scenario you tested.
RoamingScott wroteSure do.
Shotokan wroteDo you have option a11 (Low-Light AF) in the settings menu turned on?Not sure why I'd want that off, though. It's a feature that only works in AF-S according to Nikon, so clearly not the culprit of the AF-C weirdness.
newhaven wrote:
Is it practical to use exposure zebras in photo mode?
As user of both systems (Sony A1 and Nikon Z6ii), this thread is very interesting. My major gripe with both systems is the lack of focus stacking on Sony cameras (none has it) and my surprise of the lack of exposure zebras/highlights on Nikon's. The latter is very useful for me and it is always a challenge working without it in bright scenes. The histogram alleviates this somehow but is not a full replacement (the histogram will tell you that something is over-exposed but it doesn't tell you where - which depending on the scene you can ignore or fix)
If the scene with Highlight meter enabled causes under exposure, this will affect focus. If it is way underexposure, in deep dark area, sensor can’t focus if it can’t see. Low light focus will enable higher sensor gain to focus but will slow the response to the point make AFC not very meaningful. That is my guess why Z7 give up for this case in AFC but not AFS.
You could try set EVF/LCD effect off to see if it improve this regard. Or simply change another meter mode or over exposure to see if this is the cause of sloppy AF C you saw here. Not suggesting you change the way you shooting but try to understand the root cause.
No longer having Z camera, but this is how I remembered and would try if I face the same situation.
mbo27 wrote: newhaven wroteIs it practical to use exposure zebras in photo mode?As user of both systems (Sony A1 and Nikon Z6ii), this thread is very interesting. My major gripe with both systems is the lack of focus stacking on Sony cameras (none has it) and my surprise of the lack of exposure zebras/highlights on Nikon's. The latter is very useful for me and it is always a challenge working without it in bright scenes. The histogram alleviates this somehow but is not a full replacement (the histogram will tell you that something is over-exposed but it doesn't tell you where - which depending on the scene you can ignore or fix)
It is a bit of a hack, but you can use a custom picture control profile to create the equivalent of zebras on the Z cameras. This is not a good choice if you shoot JPEGs though...