fredmiranda.com Login
This topic is in the 2020 archive. You can read it and like its posts here. It is read only.

Archive 2020Kolari Ultra Thin conversion on Nikon Z6 / Z7

  
 
LarsHP
Offline
Details
p.6 #1Kolari Ultra Thin conversion on Nikon Z6 / Z7
Huge disappointment:

IBIS is not working after the UT conversion. That's perhaps the biggest reason to do the ultra-thin conversion instead of just buying a digital Leica M.

Something must have gone wrong during the service. I will have to ship it back to the USA from Norway. I have sent Kolari Vision an email and asked how to proceed.

All that said, my M mount lenses are superb on the UT converted Z6 sensor. Not only much better than the stock Z6, but also better than the full spectrum converted Sony a7 too!
Mar 13, 2021 at 06:39 AM
LarsHP
Offline
Details
p.6 #2Kolari Ultra Thin conversion on Nikon Z6 / Z7
Since I can't post images here, I have made a post at DPreview with some of my thoughts regarding the Z6 UT mod. and the below image shot with the 90mm Apo-Summicron-M @ f/2.0.

https://www.dpreview.com/forums/thread/4561344#forum-post-64947744
Mar 15, 2021 at 12:10 PM
LarsHP
Offline
Details
p.6 #3Kolari Ultra Thin conversion on Nikon Z6 / Z7
... and here the 28mm Summicron-M Asph II, also wide open and on Kolari UT mod. Z6:

https://www.dpreview.com/forums/thread/4561344#forum-post-64951298
Mar 17, 2021 at 04:08 AM
LarsHP
Offline
Details
p.6 #4Kolari Ultra Thin conversion on Nikon Z6 / Z7
I should add, that Kolari Vision fixed the IBIS issue with my converted camera, and it has been working fine since.

Here are some test shots I did with the Voigtländer Ultron 28mm f/2 Asph II (including side by side with the Summicron Asph II) :
https://drive.google.com/drive/folders/1ngYCuU1OzRZVbnbjGtwge1Mx78vuUp8q

That lens performs badly in the corners on non-Leica M sensors, and performs great on my UT modded Z6 too.
Mar 22, 2022 at 05:12 AM
electrodist
Offline
Details
p.6 #5Kolari Ultra Thin conversion on Nikon Z6 / Z7
Hi, trying to bring this thread back to life. I’m curious what people have been succesfully using to correct the colors of the Kolari UT mod on Nikons. On my modded Z6 II, the AWB sets about 3000K lower and there seems to be more magenta in the image. I am able to neutralize to my liking in editing on most photos, but not all. The most severe case was when I was shooting in the red rocks of Utah. It was difficult to achieve the correct balance between the red rocks and skin tones. At the moment, I cannot tell if it is IR or UV contamination that is effecting the colors. Whta do you all think?
Sep 30, 2023 at 02:24 PM
LarsHP
Offline
Details
p.6 #6Kolari Ultra Thin conversion on Nikon Z6 / Z7
I bought X-Rite ColorChecker, and with the software, I have made custom camera profiles for my Z6UT (as well as stock Z7) in daylight and incandescent light and use these in Adobe Camera Raw. In most situations I get great colors that way. Now and then the standard camera profile works better for some odd reason. In warm light I can't set the color temperature low enough, and for these scenarios, I have bought (thin) blue color correction filters. With these I can get flawless colors even when the lights are extremely warm.

Regarding in-camera white balance, I mostly use auto white balance with a color correction added (in the menu). Unless the light is very warm, I get pretty neutral white balance that way.

electrodist wrote:
Hi, trying to bring this thread back to life. I’m curious what people have been succesfully using to correct the colors of the Kolari UT mod on Nikons. On my modded Z6 II, the AWB sets about 3000K lower and there seems to be more magenta in the image. I am able to neutralize to my liking in editing on most photos, but not all. The most severe case was when I was shooting in the red rocks of Utah. It was difficult to achieve the correct balance between the red rocks and skin tones. At the moment, I cannot
...Show more →
Sep 30, 2023 at 03:17 PM
electrodist
Offline
Details
p.6 #7Kolari Ultra Thin conversion on Nikon Z6 / Z7
Thanks for your reply LarsHP. So it may be its just a color balance and not a problem with IR/UV as was discussed early in the thread. I do notice that skin tones need to be desaturated and selectively tuned often after correcting for white balance and tint, which was not the case on the Z6 II before the conversion. I did order a B&W 486 filter to try out to see if it helps get things correct in camera. I really liked the Z6 II colors before the conversion.
Oct 01, 2023 at 11:23 AM
LarsHP
Offline
Details
p.6 #8Kolari Ultra Thin conversion on Nikon Z6 / Z7
If you check the graph I shared previously in this thread, you can see the transmission of hot mirror filters in Sony, Nikon, Canon etc. I expect the Kolari UT filter to be a bit like Canons, which means on a Nikon (and even more so on Sony) camera, the red colors will get more exposure (become lighter) when neutral/grey balance is set correctly. That's the reason I got X-Rite ColorChecker and made custom camera (color) profiles.

electrodist wrote:
Thanks for your reply LarsHP. So it may be its just a color balance and not a problem with IR/UV as was discussed early in the thread. I do notice that skin tones need to be desaturated and selectively tuned often after correcting for white balance and tint, which was not the case on the Z6 II before the conversion. I did order a B&W 486 filter to try out to see if it helps get things correct in camera. I really liked the Z6 II colors before the conversion.

Oct 01, 2023 at 11:34 AM
FM ForumsNikon ForumJoin Upload & Sell
  
 

You are not logged inLog inRegister