fredmiranda.com Login
This topic is in the 2020 archive. You can read it and like its posts here. It is read only.

Archive 2020RF 600mm F11 DO and 800mm F11 DO

  
 
AJSJones
Offline
Details
p.11 #1RF 600mm F11 DO and 800mm F11 DO
arbitrage wrote:
NonDecaf wrote
arbitrage wroteMy only worry is how long these lenses are going to be...seems like they may be overly long if the patent is correct??
There are rumors that these could be collapsible. I don't think we've ever seen a collapsible super-telephoto prime before. Also I wonder if this lens would be a fixed aperture lens. Might save on the cost. Don't think anyone wants to stop these down any further anyway
That would be pretty slick if they were collapsible for packing or when walking through thick brush.


Anders in #10 suggested it would be a good plan, but it has risen to the level of a real rumour? If they can do it with a push-pull 100-400, they could do it with a fixed length "pull-out and click-stop" . With two moving barrels, it would be petite when collapsed !
Jun 16, 2020 at 02:23 PM
dolina
Offline
Details
p.11 #2RF 600mm F11 DO and 800mm F11 DO
ilkka_nissila wrote:
dolina wroteThe MTF chart should be nearly 1 as this would be using year 2020 materials science and this being 1st party lens it needs to be distinguished enough for people to buy.
Unfortunately this is impossible because the lens MTF is reduced by diffraction at f/11.



Let us see how 2020 material science can do?
Jun 16, 2020 at 04:49 PM
technic
Offline
Details
p.11 #3RF 600mm F11 DO and 800mm F11 DO
dolina wrote:
ilkka_nissila wrote
dolina wroteThe MTF chart should be nearly 1 as this would be using year 2020 materials science and this being 1st party lens it needs to be distinguished enough for people to buy.
Unfortunately this is impossible because the lens MTF is reduced by diffraction at f/11.
Let us see how 2020 material science can do?


are you expecting materials science (engineering) to change the laws of nature?
Jun 17, 2020 at 12:35 AM
ilkka_nissila
Online
Details
p.11 #4RF 600mm F11 DO and 800mm F11 DO
A collapsing design might actually be heavier as the mechanical system to hold everything in alignment in such a long tube consisting of sliding parts would require more materials, likely metal. Such a system might require periodical adjustment to ensure the optical system is properly aligned every time.
Jun 17, 2020 at 02:24 AM
alundeb
Offline
Details
p.11 #5RF 600mm F11 DO and 800mm F11 DO


ilkka_nissila wrote:
A collapsing design might actually be heavier as the mechanical system to hold everything in alignment in such a long tube consisting of sliding parts would require more materials, likely metal. Such a system might require periodical adjustment to ensure the optical system is properly aligned every time.


Yes, but many existing lenses are built like that. My Nikkor 1 70-300 is collapsible and does not require adjustment, but the amount of extension is moderate.
Jun 17, 2020 at 02:50 AM
ilkka_nissila
Online
Details
p.11 #6RF 600mm F11 DO and 800mm F11 DO
alundeb wrote:
Yes, but many existing lenses are built like that. My Nikkor 1 70-300 is collapsible and does not require adjustment, but the amount of extension is moderate.


Yes, but a 389mm long lens that as a comparatively narrow tube would present greater difficulty in implementing the collapsing mechanism given that the lens elements need to be precisely aligned in the extended position and because frequently people bump the lenses around when they are hiking in the field. Nikon used to make lenses such as 800 mm f/8 and 1200 mm f/11, and there are some reports that these needed regular adjustment to stay in alignment and to produce the optimal image quality.

Jun 17, 2020 at 04:19 AM
dolina
Offline
Details
p.11 #7RF 600mm F11 DO and 800mm F11 DO
technic wrote:
dolina wrote
ilkka_nissila wrote
dolina wroteThe MTF chart should be nearly 1 as this would be using year 2020 materials science and this being 1st party lens it needs to be distinguished enough for people to buy.
Unfortunately this is impossible because the lens MTF is reduced by diffraction at f/11.
Let us see how 2020 material science can do?
are you expecting materials science (engineering) to change the laws of nature?


I expect 2020 material science will allow for Canon to make a compelling product to outdo 3rd party solutions.

A reason why lenses with slower openings had so so MTF charts was more on little market motivation.

So let's wait for the actual product to come out before passing judgement.
Jun 17, 2020 at 04:22 AM
alundeb
Offline
Details
p.11 #8RF 600mm F11 DO and 800mm F11 DO
It is also a known problem that zoom lenses in general have more copy variation and alignment problems out of factory than primes. These problems would apply for a collapsible prime design.

I guess the new lenses as patented won't solve all problems. Either it will have the quality problems associated with zooms, or I can't carry it in the bag I use for the 5DSR with 100-400 mounted. It is really a head scratcher what Canon is doing with these lenses, but I definitely want to try the 800.
Jun 17, 2020 at 04:25 AM
arbitrage
Offline
Details
p.11 #9RF 600mm F11 DO and 800mm F11 DO
First image showing the new silver color and an idea of the length/width of the 600/800DO
I think that is an interesting look.

Collapsable?...seems they may be as they look like the top section may be extendable considering such a new design?? Also they look too short to be at full length in relation to the known size of the 100-500 next to them.
Also July 9th is announcement.




Jun 18, 2020 at 05:34 AM
arbitrage
Offline
Details
p.11 #10RF 600mm F11 DO and 800mm F11 DO
IF the patent we have seen is correct then the length of the 600DO should be ~ 314mm to the mount.
When we saw a photo of the 100-500 next to the 100-400II it looked maybe 10mm longer at most.
The 100-400II is listed at 193mm length. That means the 100-500 may be at most 210mm. The 600DO in this image is slightly shorter than the 100-500.

Therefore I'd say these are in their collapsed state and that rubberized section above the silver band extends out.
That is good news for packing.

I really like the look of these.




Jun 18, 2020 at 05:53 AM
alundeb
Offline
Details
p.11 #11RF 600mm F11 DO and 800mm F11 DO
The 800 seems to be about 25-26 cm long, the same as the Sigma 150-600 C, and shorter than the Sony 200-600.
Jun 18, 2020 at 05:57 AM
arbitrage
Offline
Details
p.11 #12RF 600mm F11 DO and 800mm F11 DO
alundeb wrote:
The 800 seems to be about 25-26 cm long, the same as the Sigma 150-600 C, and shorter than the Sony 200-600.


Sounds about right. Going off the patents the 800 should be 55mm longer than the 600 but they may extend by different amounts that could shift the ratio a little bit.
Jun 18, 2020 at 06:01 AM
lighthound
Offline
Details
p.11 #13RF 600mm F11 DO and 800mm F11 DO
If you measure the main body width of the 600 & 800 in that photo, it almost looks like they are actually narrower than the 100-500. You would think they would be the same as the 100-500 if they extended. That extra hardware has to fit somewhere.

I'm starting to think they're fixed length.
Jun 18, 2020 at 08:53 AM
juststeve
Offline
Details
p.11 #14RF 600mm F11 DO and 800mm F11 DO
The EVF bulge on the R5 and R6 appears to be a bit wider than that of the R just to the right. Perhaps this is just because of the two new cameras being a bit closer, but it could signify a newer higher density EVF. One can hope.

The two new Teles do appear to be collapsable. When Canon is patenting zooms with 8 to 9 moving units--see the 120-700 patents--they have probably figured out how to collapse those two lenses and still keep everything in alignment. All that collapsing stuff will probably add a bit of weight but with small lightweight lens elements maybe they still come in at under 3 pounds.

Could be interesting lenses.
Jun 18, 2020 at 09:28 AM
2xbass
Offline
Details
p.11 #15RF 600mm F11 DO and 800mm F11 DO
juststeve wrote:
The EVF bulge on the R5 and R6 appears to be a bit wider than that of the R just to the right. Perhaps this is just because of the two new cameras being a bit closer, but it could signify a newer higher density EVF. One can hope.


I think it would be a real shame if they don't have a higher resolution EVF. Once you get used to using the ones in the Sony A7RIV and the Fuji GFX100 it's really hard to go back to a lower-resolution one.
Jun 18, 2020 at 09:30 AM
Sy Sez
Offline
Details
p.11 #16RF 600mm F11 DO and 800mm F11 DO
Concerns of F11 diffraction will be mitigated when the RF 600mm F4 L, & 800mm F5.6 L DO lens's hit the market, so long as the bulk, weight and price's are not beyond ones means.

https://www.canonrumors.com/patent-more-diffractive-optics-super-telephoto-lenses/

Jun 18, 2020 at 09:39 AM
arbitrage
Offline
Details
p.11 #17RF 600mm F11 DO and 800mm F11 DO
lighthound wrote:
If you measure the main body width of the 600 & 800 in that photo, it almost looks like they are actually narrower than the 100-500. You would think they would be the same as the 100-500 if they extended. That extra hardware has to fit somewhere.

I'm starting to think they're fixed length.


Yes they do look narrower. Probably the same as the 100-400II which seems narrower in the side by side image from the photo show compared to the 100-500 (although that may just be the angle that shot was taken at). The 800 flares out at the end to make up the 18mm larger front element.
Jun 18, 2020 at 10:27 AM
Zenon Char
Offline
Details
p.11 #18RF 600mm F11 DO and 800mm F11 DO
arbitrage wrote:
First image showing the new silver color and an idea of the length/width of the 600/800DO
I think that is an interesting look.

Collapsable?...seems they may be as they look like the top section may be extendable considering such a new design?? Also they look too short to be at full length in relation to the known size of the 100-500 next to them.
Also July 9th is announcement.


5 Bodies and I see the R6 along with the R5 and R. Can't make out the other two.
Jun 18, 2020 at 12:16 PM
arbitrage
Offline
Details
p.11 #19RF 600mm F11 DO and 800mm F11 DO
Zenon Char wrote:
arbitrage wroteFirst image showing the new silver color and an idea of the length/width of the 600/800DO
I think that is an interesting look.

Collapsable?...seems they may be as they look like the top section may be extendable considering such a new design?? Also they look too short to be at full length in relation to the known size of the 100-500 next to them.
Also July 9th is announcement.
5 Bodies and I see the R6 along with the R5 and R. Can't make out the other two.


From left to right: EOS RP, EOS R5, EOS R6, EOS R, EOS Ra
Jun 18, 2020 at 12:25 PM
Zenon Char
Offline
Details
p.11 #20RF 600mm F11 DO and 800mm F11 DO
One on the right is Ra. So there is another body on the left which they hid.
Jun 18, 2020 at 12:28 PM
FM ForumsCanon ForumJoin Upload & Sell
  
 

You are not logged inLog inRegister