As noted earlier in the thread, there appears to be no image of this lens’ rear (without the lens caps)...
leicamera wroteMy 50mm f/2.0 Apo-Lanthar arrived today from Robert White (UK).
Dreadful weather outside for any serious testing...So a size comparison instead...
Left to Right... 21mm f/1.4 Nokton, 40mm f/1.2 Nokton, 50mm f/1.2 Nokton, 50mm f/2.0 Apo-Lanthar, 65mm f/2.0 Apo-Lanthar & 110mm f/2.5 Apo-Lanthar.
I did carry out a few tests though and the lens is well centered - A keeper :-)
A few observations...
1. Unlike the Voigtlander Noktons (21mm/f1.4, 40mm/f1.2 and 50mm/f1.2 E mount) The lens hood does not have a "inner hood" filter thread.
The front lens cap or filters attach to either the outside of the Hood 58mm (threaded) or the lens itself 49mm (threaded)...Both 49mm and 58mm caps are included.
2. Aperture curved blades form a perfect circle at f/2 + f/2.8 + f/16 only - Otherwise you can just make out the shape of the diaphragm in the OoF bokeh balls...To be honest it's pretty much a mute point by f/11.
3. Aperture bokeh OoF balls, look relatively clean wide open...On stopping down to the other extreme f/16, I see small OoF bokeh balls with a concentric ring pattern.
4. The OoF balls are circular in shape on central axis as you would expect, changing into a typical cats eye shape into the extreme corners of the frame.
5. The OoF areas are nicely smooth/rounded on close-ups at f/2 which I find pleasant enough to my eyes (YMMV)....When the weather improves I shall check at mid-field to see if the bokeh becomes nervous or not.
6. Focusing ring is smooth but all my other Voigtlander lenses (21mm, 40mm, 50mm, 65mm and 110mm) have a little more resistance which I personally prefer...circa 150 deg focus throw (Inf- 0.45m).
7. Very sharp and feels pretty lightweight...reminds me of my old ZM 50mm f/2.0 Planar but on steroids!
Hi Vivek and Philip....I have not been following this thread...not sure if this helps or not!
If this is relating to FC....I took a quick test shot of a tree at near infinity @ f2 centrally focused....then placed it in all 4 of the corners....It remained pin sharp (so no need to refocus)
Really looking forward to this lens. I pre-ordered it from B&H early on the first day they had it listed. I'm hoping that (a) they ship on the 12th and (b) I'm one of the first on the list so I can try it out this weekend (I get my B&H orders in one day where I live).
Thanks Guy, I didn't realize there was more than one US distributor, good to know. It does ring a bell....so maybe I did know that at one time. (Getting old is fun....)
Here's the official distributor list right from Cosina.
GMPhotography wrote: tsdevine wroteCameraQuest is a US distributor for Voigtlander (Cosina). So I wonder if B&H will be getting them from CameraQuest.
I hope CameraQuest ships Thursday. I'm probably going up to NYC on Sunday, would love to take the lens along.
-Tim
alphanumeric wroteHeadshotDeluxe wroteDoes anyone know when this lens will start shipping?If you haven’t preordered with anyone yet, you are probably looking at January - February if you preorder today.
As of the other day, the first batch to Camera Quest were still in transit. Hopefully those will arrive soon and start going out to customers who were lucky enough to get on the first preorder shipment.
B&H seems to have no idea on when their shipment will arrive and therefore no idea when they will arrive to customers.No In a word
BH and Adorama get there Voightlanders from the East Coast distributor Photo Village which BTW is across the street from BH. Rich is the owner and a very nice guy. I bought many Voightlanders from him and he also sells Leica . Again very good source but truth is the first to get CV glass is Photo Village and Cameraquest.
You folks just need to ask the person on the stuff. ME been a customer for decades
alphanumeric wrote: GMPhotography wroteBH and Adorama get there Voightlanders from the East Coast distributor Photo Village which BTW is across the street from BH. Rich is the owner and a very nice guy. I bought many Voightlanders from him and he also sells Leica . Again very good source but truth is the first to get CV glass is Photo Village and Cameraquest.
You folks just need to ask the person on the stuff. ME been a customer for decadesFYI, Photo Village closed their showroom down.
alphanumeric wroteGMPhotography wroteBH and Adorama get there Voightlanders from the East Coast distributor Photo Village which BTW is across the street from BH. Rich is the owner and a very nice guy. I bought many Voightlanders from him and he also sells Leica . Again very good source but truth is the first to get CV glass is Photo Village and Cameraquest.
You folks just need to ask the person on the stuff. ME been a customer for decadesFYI, Photo Village closed their showroom down.
I think they are redoing there showroom but mail order is still on. But do check for sure. As I said they are really nice folks.
alphanumeric wroteGMPhotography wroteBH and Adorama get there Voightlanders from the East Coast distributor Photo Village which BTW is across the street from BH. Rich is the owner and a very nice guy. I bought many Voightlanders from him and he also sells Leica . Again very good source but truth is the first to get CV glass is Photo Village and Cameraquest.
You folks just need to ask the person on the stuff. ME been a customer for decadesFYI, Photo Village closed their showroom down.
I think they are redoing there showroom but mail order is still on. But do check for sure. As I said they are really nice folks.
I won't bother uploading all the images (As I'm really tight for time today). + I'm sure Fred + PR & Co. will follow up doing a far more exhaustive in depth tests than myself (Hopefully in better weather conditions than I'm experiencing at present).
Infinity Diagonal Horizon Test...The 50mm Apo-Lanthar (50AL) f/2 has MUCH better resolution in the corners WO at f/2 than the 50mm Nokton (50N) f1.2 does @ f/2...The 50AL performs similar to the 65mm Apo-Lanthar in this respect.
I would also score the central-resolution of the 50AL as being a bit higher than the 50N @ f/2 (The 50N was always pretty good in the centre just like my 50mm Summilux Asph was).
At infinity I'm not detecting any significant FC on the 50AL @ f/2 that is worth worrying about...no need to refocus for a mid point between centre and edges.
The 50N has a slightly wider FoV than the 50AL (I always felt that the 50N was closer to a 48-49mm FL lens)...So I would say that the 50AL was a true 50mm FL lens.
When I carried out the Infinity Diagonal Horizon Test I was shooting towards the sun on a heavy cloudy rainy day....The corners of the 50N showed some slight LaCA which was absent in the 50AL images...Obviously the 50AL is far better corrected as you would expect from a Apo-Lanthar lens.
When I focused in on some trees about 3 miles away, I still had a reasonable amount of focus throw (rotation) remaining before I hit the infinity hardstop - I suspect my copy reaches infinity possibly before the hardstop (I will have to check this tonight - moon, stars etc... + Coma).
At minimum focus - 9"x6" image fills the FF A7R4 camera sensor...Photographing the pixels (head on) on my 27" Eizo monitor they were all (Centre and Corners) clearly defined at f/2 with improvements up to f/5.6...No need for a correction lens for close-ups IMHO.
Just an observation but the hood seems a bit overly long for a 50mm f/2 FL lens...I have not tested for flare though as the sun is absent today...I will be interested when someone compares this to the 50mm Loxia Planar lens as this lens acts somewhat like a Planar.
All in all this is a very impressive lens from Voigtlander...It might be a bit slow for some people but that could be somewhat offset by how light it is and easy to handle in low light...A great travel companion :-)
Update edit...Just snapped the moon @ f/2 and sadly the hard stop is way beyond that giving me a fuzzy OoF moon....The moon is in focus inline with the engraved infinity symbol...not at the engraved infinity extension mark (which is where the hard stop is at).
Thanks for the comments, I'm looking forward to all the expert reviews and opinions on this lens. I'm hoping to replace my beloved CV65. It's been my product photo lens of choice, but it's slightly too long and too big to be brought along with a travel kit. The 50/2 seems to solve both these problems.
'the hood seems a bit overly long for a 50mm f/2 FL lens'
It's a hallmark of high end lenses, to optimise hood coverage; you see the same in the Loxia 85mm (also criticised for it). Much easier to buy a shortie than the perfect length one.
I was debating whether or not to upload this image because of the dreadful light....50mm Apo Lanthar iso50 1/8000th @ f/2
Please click on link to see downsized 4000px wide image with 100% crops.... https://www.flickr.com/photos/132175582@N05/49205911532/sizes/o/
johnahill wrote:
Low res transfer to my phone
At f4.0
Thanks so much for that picture! It answers the question I really wanted: do you pay a price in classic cv sunstar look for the getting the round f2.8; and it seems the answer is no! Thats a great clean sunstar....
realVivek wrote:
Thank you, Barry! Yes, very helpful!
(Some wondered about this making into a Leica M mount and the size of the rear elements, etc. it appears that there will no issues.)
It's not the size of the rear elements, it's the position that is the issue. Can't be sure, but that picture makes the element look very close to the rear flange, which is the problem for redesigning for a longer flange distance mount like M, even though it's not massively longer like an SLR mount.
Surely there are many Leica lenses with rear elements protruding into the camera. I have a few, myself.
DavidBM wrote: realVivek wroteThank you, Barry! Yes, very helpful!
(Some wondered about this making into a Leica M mount and the size of the rear elements, etc. it appears that there will no issues.)It's not the size of the rear elements, it's the position that is the issue. Can't be sure, but that picture makes the element look very close to the rear flange, which is the problem for redesigning for a longer flange distance mount like M, even though it's not massively longer like an SLR mount.
realVivek wrote:
Surely there are many Leica lenses with rear elements protruding into the camera. I have a few, myself.
DavidBM wroterealVivek wroteThank you, Barry! Yes, very helpful!
(Some wondered about this making into a Leica M mount and the size of the rear elements, etc. it appears that there will no issues.)It's not the size of the rear elements, it's the position that is the issue. Can't be sure, but that picture makes the element look very close to the rear flange, which is the problem for redesigning for a longer flange distance mount like M, even though it's not massively longer like an SLR mount.
Do you have the 50 APO Cron? If this lens ever makes it to Leica Land, I'd love to see a side by side comparison.
I loved the 50 APO summicron-M when I had my SL. I imagine (all I can do is imagine at this point) that this will make me just as happy on the a7r iv
realVivek wrote:
Surely there are many Leica lenses with rear elements protruding into the camera. I have a few, myself.
DavidBM wroterealVivek wroteThank you, Barry! Yes, very helpful!
(Some wondered about this making into a Leica M mount and the size of the rear elements, etc. it appears that there will no issues.)It's not the size of the rear elements, it's the position that is the issue. Can't be sure, but that picture makes the element look very close to the rear flange, which is the problem for redesigning for a longer flange distance mount like M, even though it's not massively longer like an SLR mount.
Yeah they could do that. Haven't so far (CV) that I know of, but it's certainly possible. The only other issue will be if they can keep the same performance on the thinner Leica stack with only a simple tweak...