fredmiranda.com Login
This topic is in the 2019 archive. You can read it and like its posts here. It is read only.

Archive 2019CamRanger 2 for Sony

  
 
dclark
Online
Details
p.2 #1CamRanger 2 for Sony
Fred Miranda wrote:
b_mellow wrote
mike1812 wrote
b_mellow wroteIs this thing the next Arsenal? Or is it actually any good?
The original Camranger was well received by the Canon and Nikon users. It seems to be a solid product that doesn't try to oversell its abilities - it doesn't come close to promising what Arsenal did, but rather tries to deliver on a core list of uses. This will be the first real test with Sony cameras with the V2 product. I'm not buying immediately but will be closely following user experience to see if it's the real deal (I think it is).
I'm interested to see how it performs. I was one of the suckers who bought the Arsenal lol. I was really intrigued by the focus stacking possibilities but all I ended up with was a few hundred dollar remote shutter trigger. I think I'm in the same boat as you, I won't be buying immediately but I'm interested to see how others like this Cam Ranger.
I don't think it's easy to implement focus stacking with Sony cameras (new and old). I'm curious to see if CamRanger can do any better than Arsenal.

Arsenal came up with a workaround but still don't not work great:
https://support.witharsenal.com/en/articles/2169944-focus-stacking-on-sony-cameras


The lack of focus control on Sony cameras is a worry, but I notice Arsenal said it was a problem with "older" Sony cameras. Not sure what that means. Regardless I have a lot more confidence in CamRanger. They seem to know what they are doing and are pretty open and honest. They are very specific about which Sony cameras are compatible:
Sony: a7 II, a7S II, a7R II, a7 III, a7R III, a9, a99, a99 II, a6300, a6400, and a6500.

I have a CamRanger 2 on order so I hope to know by the end of Sept. If it's a dud like the Arsenal I will do the same with it I did with the Arsenal, return it.

Dave
Aug 31, 2019 at 01:02 PM
Fred Miranda
Offline
Admin
Upload & Sell: On
Details
p.2 #2CamRanger 2 for Sony
dclark wrote:
Fred Miranda wrote
b_mellow wrote
mike1812 wrote
b_mellow wroteIs this thing the next Arsenal? Or is it actually any good?
The original Camranger was well received by the Canon and Nikon users. It seems to be a solid product that doesn't try to oversell its abilities - it doesn't come close to promising what Arsenal did, but rather tries to deliver on a core list of uses. This will be the first real test with Sony cameras with the V2 product. I'm not buying immediately but will be closely following user experience to see if it's the real deal (I think it is).
I'm interested to see how it performs. I was one of the suckers who bought the Arsenal lol. I was really intrigued by the focus stacking possibilities but all I ended up with was a few hundred dollar remote shutter trigger. I think I'm in the same boat as you, I won't be buying immediately but I'm interested to see how others like this Cam Ranger.
I don't think it's easy to implement focus stacking with Sony cameras (new and old). I'm curious to see if CamRanger can do any better than Arsenal.

Arsenal came up with a workaround but still don't not work great:
https://support.witharsenal.com/en/articles/2169944-focus-stacking-on-sony-cameras
The lack of focus control on Sony cameras is a worry, but I notice Arsenal said it was a problem with "older" Sony cameras. Not sure what that means. Regardless I have a lot more confidence in CamRanger. They seem to know what they are doing and are pretty open and honest. They are very specific about which Sony cameras are compatible:
Sony: a7 II, a7S II, a7R II, a7 III, a7R III, a9, a99, a99 II, a6300, a6400, and a6500.

I have a CamRanger 2 on order so I hope to know by the end of Sept. If it's a
...Show more →

Hi Dave,
I just tested Arsenal using their latest firmware and it's still disappointing for focus stacking (A7R3). It's a very slow process and provides inaccurate focusing for the 5 scenes I tested it with. At this point, I don't think they will be able to fix it and perhaps it's a Sony issue even with newer bodies.

I would be surprised (and happy) if CamRanger makes focus stacking work with the Sony API in a reliable manner.
Aug 31, 2019 at 01:28 PM
schlotz
Offline
Details
p.2 #3CamRanger 2 for Sony
dclark wrote:
Fred Miranda wrote
b_mellow wrote
mike1812 wrote
b_mellow wroteIs this thing the next Arsenal? Or is it actually any good?
The original Camranger was well received by the Canon and Nikon users. It seems to be a solid product that doesn't try to oversell its abilities - it doesn't come close to promising what Arsenal did, but rather tries to deliver on a core list of uses. This will be the first real test with Sony cameras with the V2 product. I'm not buying immediately but will be closely following user experience to see if it's the real deal (I think it is).
I'm interested to see how it performs. I was one of the suckers who bought the Arsenal lol. I was really intrigued by the focus stacking possibilities but all I ended up with was a few hundred dollar remote shutter trigger. I think I'm in the same boat as you, I won't be buying immediately but I'm interested to see how others like this Cam Ranger.
I don't think it's easy to implement focus stacking with Sony cameras (new and old). I'm curious to see if CamRanger can do any better than Arsenal.

Arsenal came up with a workaround but still don't not work great:
https://support.witharsenal.com/en/articles/2169944-focus-stacking-on-sony-cameras
The lack of focus control on Sony cameras is a worry, but I notice Arsenal said it was a problem with "older" Sony cameras. Not sure what that means. Regardless I have a lot more confidence in CamRanger. They seem to know what they are doing and are pretty open and honest. They are very specific about which Sony cameras are compatible:
Sony: a7 II, a7S II, a7R II, a7 III, a7R III, a9, a99, a99 II, a6300, a6400, and a6500.

I have a CamRanger 2 on order so I hope to know by the end of Sept. If it's a
...Show more →

Really appreciate you taking on the challenge with CamRanger-2, Dave. Arsenal was such a disappointment and like you I returned it. I'll anxiously watch for your review posts. Here's hoping they've got the focus stacking solved!

Matt
Sep 01, 2019 at 05:42 AM
dclark
Online
Details
p.2 #4CamRanger 2 for Sony
CamRanger 2 arrived today, a few days earlier than expected. Anybody else receive one?

It may be a few days before I can experiment with it.

Dave
Sep 12, 2019 at 05:03 PM
wittyphrase
Offline
Details
p.2 #5CamRanger 2 for Sony
Haven’t gotten a shipping notice on mine yet, so nope!

dclark wrote:
CamRanger 2 arrived today, a few days earlier than expected. Anybody else receive one?

It may be a few days before I can experiment with it.

Dave

Sep 12, 2019 at 09:38 PM
andyptak
Offline
Details
p.2 #6CamRanger 2 for Sony
Because CamRanger wasn't available for Sony until now I don't know that much about it's operation. Can you use something like Sony Multishift and CamRanger at the same time? Sony have a habit of making menu choices mutually exclusive so I don't know if that affects CamRanger or not. Thanks.
Sep 13, 2019 at 05:56 AM
andyptak
Offline
Details
p.2 #7CamRanger 2 for Sony
C'mon guys. Anyone know?
Sep 14, 2019 at 12:51 PM
dclark
Online
Details
p.2 #8CamRanger 2 for Sony
I had some time to do some testing with the CamRanger 2 and a A7R3 with a Sony 90mm lens, and using an iPad with the CamRanger 2 app.

The system comes in a nice carrying case and includes a mount for the camera hot shoe. The CamRanger was always a bit of a mess dangling from the camera, so this new arrangement is quite a bit better. The cable that connects the CamRanger 2 and the camera is short but just the right length so there is not a lot of extra cable making a mess. I bought the optional Arca clamp to mount the CamRanger to the L-bracket. I prefer that since it is a more solid mount and I don't like using the hot shoe since the Sony hot shoe has some delicate electrical contacts that I don't want to damage. A problem with the clamp is that it covers the battery compartment. If you plan to use more than one battery for extended sessions, you will have to remove the clamp to exchange batteries. That means you need a screwdriver with you. If you only plan to use one battery, the battery can be charged in the CamRanger 2. The supplied charging cable is short but it fits into the carrying case.

Using the CamRanger with Sony cameras requires an SD card in the CamRanger 2. I used an SD card that had been formatted in the A7R3 and it worked. So far as I can see there is no way to format the card in the CamRanger.

There is some setup required in the Camera. CamRanger provides instructions at < ;https://camranger.com/knowledge-base/camera-setup/>; > https://camranger.com/knowledge-base/camera-setup/
The main items are to make sure to set the USB connection to PC Remote (not mass storage as it is usually set for FW updates), set camera WiFi to off, and make sure camera charging via the USB port is off. If the charging via the USB port is on the CamRanger's battery will run down quickly.

I checked all the usual operations to AF focus, manual focus, take photos singly or in bursts, download and review images. Everything seems to work as expected. I checked both 2.4 and 5GHz WiFi connections. I did not see much difference in speed although in principle the 5 GHz should be quicker. One of the main reasons I am interested in the CamRanger 2 is the increased range. I used the original CamRanger in a bird blind that has a couple of trees and the blind wall interfering with the WiFi connection and the connection was unreliable. With the CamRanger 2 the connection was solid. I moved even further with even more obstructions and the connection remained reliable so there is a significant improvement. The 5 GHz has shorter range than the 2.4 GHz as expected. I did not measure the unobstructed line of sight range.

One of the main reasons I bought the CamRanger 2 is for focus stacking. There has been a lot of question about whether CamRanger would be able to deliver focus stacking because of limitations of the Sony USB control interface. I tested focus stacking using the A7R3 and a Sony 90mm macro lens.

The CamRanger 2 has two focus stacking modes. The original mode involves using the CamRanger 2 to manually focus to the near near point, select small medium or large step size, the number of steps, and then starting. That method works as it did in the original CamRanger. The bad news is that each step requires ~7 sec. This is because the CamRanger needs to wait for the camera to clear its buffer by transferring the image to the SD card in the CamRanger, then shift the focus point, wait to be sure the focus has moved and settled, then take the next image. The image transfer from the camera to the CamRanger 2 is slow. It is not possible to speed this up by not transferring the image to the CamRanger and only writing it to the camera SD card. Again a limitation of the Sony USB control interface. Even though it is slow it seems to work and for many applications with be acceptable. It will not be acceptable for anything that may move. For example, I tried to make a stacked image of a rare spider my wife found. The spider did not follow my instructions and kept moving every 15-30 seconds.

I spent some time measuring the relative size of the small medium and large steps. The ratio of the step sizes with my 90mm lens were large/medium ~7.5X, large/small ~100x. The ratios were the same with the lens set at magnification 1:3 and 1:1.2.

The new focus stacking mode in the CamRanger 2 is to set the near focus point and the far focus point and the CamRanger sets the number of steps. There is the possibility to set a scale factor to reduce or increase the step size. I tried that mode and got repeated failures. I sent an email to CamRanger's support describing the problems. (Even though I sent the email a bit after midnight PDT, I got a reply 33 min later! Amazing response.) Unfortunately the response was that Sony's USB remote control does not provide the control that other cameras provide, so that mode does not work with Sony cameras. They said that fact that it appears with a Sony camera is a bug in the iPad app that will be corrected in the next release. Failure of the new focus stacking mode is a major disappointment.

I also tried the time lapse mode. It seems to work but is also limited by the slow transfer of images to the CamRanger 2 SD card. The shortest time interval that can be selected in the iPad app is 1 sec, but the actual shortest interval is about 4.2 sec. That obviously limits the time lapse capability of the system.

I have had a few email exchanges with CamRanger about the slow operation of focus stacking and time lapse. The response is amazingly quick. I believe Dave at CamRanger must have a bad case of insomnia since he responds within a few minutes 24/7. The limitations seem to all trace to limitations of the Sony USB control interface. It's slow and many control functions and responses are not implemented. Consequently it is necessary to experiment with the system to see how to build in delays to be sure the camera has responded before proceeding to the next step. Canon and Nikon seem to have far superior USB control functions.

I will try these operations with the A7R4 and A9, other lenses eventually but I don't expect any difference. In short, everything seems to work, the range is much improved, the camera mounting is improved, but focus stacking and time lapse have some major limitations. The limitations for Sony cameras are so significant it may be reasonable to conclude they should be classified as "not working".

Dave

P.S. I don't use the multishift so I don't know if that can be done from the CamRanger.
Sep 15, 2019 at 05:17 PM
mcbroomf
Offline
Details
p.2 #9CamRanger 2 for Sony
Great write up Dave ... thanks
Sep 16, 2019 at 03:28 AM
wittyphrase
Offline
Details
p.2 #10CamRanger 2 for Sony
Thank you for your detailed write up. I got notice mine shipped last night, so I’ll have a chance to try this myself, but do you know if the SD card speed you have to use in the device with Sony cameras is the limiting factor in the setup? Their documentation doesn’t specify whether it supports UHS-II or what effect this link has in the process.

dclark wrote:
I had some time to do some testing with the CamRanger 2 and a A7R3 with a Sony 90mm lens, and using an iPad with the CamRanger 2 app.

The system comes in a nice carrying case and includes a mount for the camera hot shoe. The CamRanger was always a bit of a mess dangling from the camera, so this new arrangement is quite a bit better. The cable that connects the CamRanger 2 and the camera is short but just the right length so there is not a lot of extra cable making a mess. I bought the optional
...Show more →
Sep 16, 2019 at 05:42 AM
dclark
Online
Details
p.2 #11CamRanger 2 for Sony
wittyphrase wrote:
Thank you for your detailed write up. I got notice mine shipped last night, so I’ll have a chance to try this myself, but do you know if the SD card speed you have to use in the device with Sony cameras is the limiting factor in the setup? Their documentation doesn’t specify whether it supports UHS-II or what effect this link has in the process.

dclark wroteI had some time to do some testing with the CamRanger 2 and a A7R3 with a Sony 90mm lens, and using an iPad with the CamRanger 2 app.

The system comes in a nice carrying case and includes a mount for the camera hot shoe. The CamRanger was always a bit of a mess dangling from the camera, so this new arrangement is quite a bit better. The cable that connects the CamRanger 2 and the camera is short but just the right length so there is not a lot of extra cable making a mess. I bought the optional Arca clamp to mount the CamRanger to the L-bracket. I prefer that since it is a more solid mount and I don't like using the hot shoe since the Sony hot shoe has some delicate electrical contacts that I don't want to damage. A problem with the clamp is that it covers the battery compartment. If you plan to use more than one battery for extended sessions, you will have to remove the clamp to exchange batteries. That means you need a screwdriver with you. If you only plan to use one battery, the battery can be charged in the CamRanger 2. The supplied charging cable is short but it fits into the carrying case.

Using the CamRanger with Sony cameras requires an SD card in the CamRanger 2. I used an SD card that had been formatted in the A7R3 and it worked. So far as I can see there is no way to format the card in the CamRanger.

There is some setup required in the Camera. CamRanger provides instructions at < ;https://camranger.com/knowledge-base/camera-setup/>; > https://camranger.com/knowledge-base/camera-setup/
The main items are to make sure to set the USB connection to PC Remote (not mass storage as it is usually set for FW updates), set camera WiFi to off, and make sure camera charging via the USB port is off. If the charging via the USB port is on the CamRanger's battery will run down quickly.

I checked all the usual operations to AF focus, manual focus, take photos singly or in bursts, download and review images. Everything seems to work as expected. I checked both 2.4 and 5GHz WiFi connections. I did not see much difference in speed although in principle the 5 GHz should be quicker. One of the main reasons I am interested in the CamRanger 2 is the increased range. I used the original CamRanger in a bird blind that has a couple of trees and the blind wall interfering with the WiFi connection and the connection was unreliable. With the CamRanger 2 the connection was solid. I moved even further with even more obstructions and the connection remained reliable so there is a significant improvement. The 5 GHz has shorter range than the 2.4 GHz as expected. I did not measure the unobstructed line of sight range.

One of the main reasons I bought the CamRanger 2 is for focus stacking. There has been a lot of question about whether CamRanger would be able to deliver focus stacking because of limitations of the Sony USB control interface. I tested focus stacking using the A7R3 and a Sony 90mm macro lens.

The CamRanger 2 has two focus stacking modes. The original mode involves using the CamRanger 2 to manually focus to the near near point, select small medium or large step size, the number of steps, and then starting. That method works as it did in the original CamRanger. The bad news is that each step requires ~7 sec. This is because the CamRanger needs to wait for the camera to clear its buffer by transferring the image to the SD card in the CamRanger, then shift the focus point, wait to be sure the focus has moved and settled, then take the next image. The image transfer from the camera to the CamRanger 2 is slow. It is not possible to speed this up by not transferring the image to the CamRanger and only writing it to the camera SD card. Again a limitation of the Sony USB control interface. Even though it is slow it seems to work and for many applications with be acceptable. It will not be acceptable for anything that may move. For example, I tried to make a stacked image of a rare spider my wife found. The spider did not follow my instructions and kept moving every 15-30 seconds.

I spent some time measuring the relative size of the small medium and large steps. The ratio of the step sizes with my 90mm lens were large/medium ~7.5X, large/small ~100x. The ratios were the same with the lens set at magnification 1:3 and 1:1.2.

The new focus stacking mode in the CamRanger 2 is to set the near focus point and the far focus point and the CamRanger sets the number of steps. There is the possibility to set a scale factor to reduce or increase the step size. I tried that mode and got repeated failures. I sent an email to CamRanger's support describing the problems. (Even though I sent the email a bit after midnight PDT, I got a reply 33 min later! Amazing response.) Unfortunately the response was that Sony's USB remote control does not provide the control that other cameras provide, so that mode does not work with Sony cameras. They said that fact that it appears with a Sony camera is a bug in the iPad app that will be corrected in the next release. Failure of the new focus stacking mode is a major disappointment.

I also tried the time lapse mode. It seems to work but is also limited by the slow transfer of images to the CamRanger 2 SD card. The shortest time interval that can be selected in the iPad app is 1 sec, but the actual shortest interval is about 4.2 sec. That obviously limits the time lapse capability of the system.

I have had a few email exchanges with CamRanger about the slow operation of focus stacking and time lapse. The response is amazingly quick. I believe Dave at CamRanger must have a bad case of insomnia since he responds within a few minutes 24/7. The limitations seem to all trace to limitations of the Sony USB control interface. It's slow and many control functions and responses are not implemented. Consequently it is necessary to experiment with the system to see how to build in delays to be sure the camera has responded before proceeding to the next step. Canon and Nikon seem to have far superior USB control functions.

I will try these operations with the A7R4 and A9, other lenses eventually but I don't expect any difference. In short, everything seems to work, the range is much improved, the camera mounting is improved, but focus stacking and time lapse have some major limitations. The limitations for Sony cameras are so significant it may be reasonable to conclude they should be classified as "not working".

Dave

P.S. I don't use the multishift so I don't know if that can be done from the CamRanger.


I tried UHS-I and UHS-II cards (Sony's fastest) and it made no difference. It seems to be the USB speed that is limiting.
Sep 16, 2019 at 08:28 AM
wittyphrase
Offline
Details
p.2 #12CamRanger 2 for Sony
dclark wrote:
wittyphrase wroteThank you for your detailed write up. I got notice mine shipped last night, so I’ll have a chance to try this myself, but do you know if the SD card speed you have to use in the device with Sony cameras is the limiting factor in the setup? Their documentation doesn’t specify whether it supports UHS-II or what effect this link has in the process.

dclark wroteI had some time to do some testing with the CamRanger 2 and a A7R3 with a Sony 90mm lens, and using an iPad with the CamRanger 2 app.

The system comes in a nice carrying case and includes a mount for the camera hot shoe. The CamRanger was always a bit of a mess dangling from the camera, so this new arrangement is quite a bit better. The cable that connects the CamRanger 2 and the camera is short but just the right length so there is not a lot of extra cable making a mess. I bought the optional Arca clamp to mount the CamRanger to the L-bracket. I prefer that since it is a more solid mount and I don't like using the hot shoe since the Sony hot shoe has some delicate electrical contacts that I don't want to damage. A problem with the clamp is that it covers the battery compartment. If you plan to use more than one battery for extended sessions, you will have to remove the clamp to exchange batteries. That means you need a screwdriver with you. If you only plan to use one battery, the battery can be charged in the CamRanger 2. The supplied charging cable is short but it fits into the carrying case.

Using the CamRanger with Sony cameras requires an SD card in the CamRanger 2. I used an SD card that had been formatted in the A7R3 and it worked. So far as I can see there is no way to format the card in the CamRanger.

There is some setup required in the Camera. CamRanger provides instructions at < ;https://camranger.com/knowledge-base/camera-setup/>; > https://camranger.com/knowledge-base/camera-setup/
The main items are to make sure to set the USB connection to PC Remote (not mass storage as it is usually set for FW updates), set camera WiFi to off, and make sure camera charging via the USB port is off. If the charging via the USB port is on the CamRanger's battery will run down quickly.

I checked all the usual operations to AF focus, manual focus, take photos singly or in bursts, download and review images. Everything seems to work as expected. I checked both 2.4 and 5GHz WiFi connections. I did not see much difference in speed although in principle the 5 GHz should be quicker. One of the main reasons I am interested in the CamRanger 2 is the increased range. I used the original CamRanger in a bird blind that has a couple of trees and the blind wall interfering with the WiFi connection and the connection was unreliable. With the CamRanger 2 the connection was solid. I moved even further with even more obstructions and the connection remained reliable so there is a significant improvement. The 5 GHz has shorter range than the 2.4 GHz as expected. I did not measure the unobstructed line of sight range.

One of the main reasons I bought the CamRanger 2 is for focus stacking. There has been a lot of question about whether CamRanger would be able to deliver focus stacking because of limitations of the Sony USB control interface. I tested focus stacking using the A7R3 and a Sony 90mm macro lens.

The CamRanger 2 has two focus stacking modes. The original mode involves using the CamRanger 2 to manually focus to the near near point, select small medium or large step size, the number of steps, and then starting. That method works as it did in the original CamRanger. The bad news is that each step requires ~7 sec. This is because the CamRanger needs to wait for the camera to clear its buffer by transferring the image to the SD card in the CamRanger, then shift the focus point, wait to be sure the focus has moved and settled, then take the next image. The image transfer from the camera to the CamRanger 2 is slow. It is not possible to speed this up by not transferring the image to the CamRanger and only writing it to the camera SD card. Again a limitation of the Sony USB control interface. Even though it is slow it seems to work and for many applications with be acceptable. It will not be acceptable for anything that may move. For example, I tried to make a stacked image of a rare spider my wife found. The spider did not follow my instructions and kept moving every 15-30 seconds.

I spent some time measuring the relative size of the small medium and large steps. The ratio of the step sizes with my 90mm lens were large/medium ~7.5X, large/small ~100x. The ratios were the same with the lens set at magnification 1:3 and 1:1.2.

The new focus stacking mode in the CamRanger 2 is to set the near focus point and the far focus point and the CamRanger sets the number of steps. There is the possibility to set a scale factor to reduce or increase the step size. I tried that mode and got repeated failures. I sent an email to CamRanger's support describing the problems. (Even though I sent the email a bit after midnight PDT, I got a reply 33 min later! Amazing response.) Unfortunately the response was that Sony's USB remote control does not provide the control that other cameras provide, so that mode does not work with Sony cameras. They said that fact that it appears with a Sony camera is a bug in the iPad app that will be corrected in the next release. Failure of the new focus stacking mode is a major disappointment.

I also tried the time lapse mode. It seems to work but is also limited by the slow transfer of images to the CamRanger 2 SD card. The shortest time interval that can be selected in the iPad app is 1 sec, but the actual shortest interval is about 4.2 sec. That obviously limits the time lapse capability of the system.

I have had a few email exchanges with CamRanger about the slow operation of focus stacking and time lapse. The response is amazingly quick. I believe Dave at CamRanger must have a bad case of insomnia since he responds within a few minutes 24/7. The limitations seem to all trace to limitations of the Sony USB control interface. It's slow and many control functions and responses are not implemented. Consequently it is necessary to experiment with the system to see how to build in delays to be sure the camera has responded before proceeding to the next step. Canon and Nikon seem to have far superior USB control functions.

I will try these operations with the A7R4 and A9, other lenses eventually but I don't expect any difference. In short, everything seems to work, the range is much improved, the camera mounting is improved, but focus stacking and time lapse have some major limitations. The limitations for Sony cameras are so significant it may be reasonable to conclude they should be classified as "not working".

Dave

P.S. I don't use the multishift so I don't know if that can be done from the CamRanger.
I tried UHS-I and UHS-II cards (Sony's fastest) and it made no difference. It seems to be the USB speed that is limiting.


I guess that's good. So I don't have to worry about fancy cards then. Thank you!

Sep 16, 2019 at 02:06 PM
wittyphrase
Offline
Details
p.2 #13CamRanger 2 for Sony
UPDATE: Resolved, but keeping text below in case anyone else experiences issues. The problem was the CR2 not recognizing the SD card. Customer service told me formatting in camera won't always work and I should try doing it on a computer, which I did and it resolved all the problems below.

Updating this to see if anyone else has had a hard time. Working with an A7III, which is listed as compatible.

Mine arrived today and I simply could not get the app on my iPad to connect for about 45 minutes. I wrote to support and detailed everything, assuming I must be doing something wrong. I tried a different USB-A to USB-C that I had and suddenly it worked. Switched back to the included cable and it was working now...

But I'm now having a few other problems. The app keeps telling me I must have an SD card in the device in order to capture images. I do have a card in there. I tried a variety of cards and none were recognized.

I can control the camera from the app and the response is just about instantaneous as far as I can tell, but the settings in the app don't update to reflect what the camera is actually set to. If I change focus area, or aperture, it'll change on the camera, but it's not reflected in the app. Likewise, certain functions seem to cause the setting to get locked in the camera.

I can still take pictures, but because of the aforementioned failure to recognize the SD card, none of them transmit to the app. The display on camera shows a constant writing to card (indicator light is on as well). This simply does not stop. If I try to review the image in camera, I am frozen on the image and cannot do anything until I disconnect the CR2 from the camera. Even turning the camera off and on again doesn't do anything.

Seems at least Dave above has his working, so I'm hopeful I'm just doing something wrong, but thus far am not having a great experience.

Edited on Sep 18, 2019 at 09:17 PM · View previous versions
Sep 18, 2019 at 07:02 PM
dclark
Online
Details
p.2 #14CamRanger 2 for Sony
wittyphrase wrote:
Updating this to see if anyone else has had a hard time. Working with an A7III, which is listed as compatible.

Mine arrived today and I simply could not get the app on my iPad to connect for about 45 minutes. I wrote to support and detailed everything, assuming I must be doing something wrong. I tried a different USB-A to USB-C that I had and suddenly it worked. Switched back to the included cable and it was working now...

But I'm now having a few other problems. The app keeps telling me I must have an SD card in the device
...Show more →

The SD card in the CamRanger 2 seems to be required. I found that a card that had been formatted in the A7R3 worked fine. There are also a number of camera setup requirements having to do with the PC Remote operation that need to be set. Review this:
https://camranger.com/knowledge-base/camera-setup/
In particular the USB connection needs to be set to PC Remote (menu Setup 4/7), USB Power Supply Off, and PC Remote Settings Still Img. Save Dest. set to PC+Camera.

BTW, be sure your battery is fully charged. It took a few hours for the one I received. It was nearly fully discharged.

Dave
Sep 18, 2019 at 08:46 PM
wittyphrase
Offline
Details
p.2 #15CamRanger 2 for Sony
dclark wrote:
wittyphrase wroteUpdating this to see if anyone else has had a hard time. Working with an A7III, which is listed as compatible.

Mine arrived today and I simply could not get the app on my iPad to connect for about 45 minutes. I wrote to support and detailed everything, assuming I must be doing something wrong. I tried a different USB-A to USB-C that I had and suddenly it worked. Switched back to the included cable and it was working now...

But I'm now having a few other problems. The app keeps telling me I must have an SD card in the device in order to capture images. I do have a card in there. I tried a variety of cards and none were recognized.

I can control the camera from the app and the response is just about instantaneous as far as I can tell, but the settings in the app don't update to reflect what the camera is actually set to. If I change focus area, or aperture, it'll change on the camera, but it's not reflected in the app. Likewise, certain functions seem to cause the setting to get locked in the camera.

I can still take pictures, but because of the aforementioned failure to recognize the SD card, none of them transmit to the app. The display on camera shows a constant writing to card (indicator light is on as well). This simply does not stop. If I try to review the image in camera, I am frozen on the image and cannot do anything until I disconnect the CR2 from the camera. Even turning the camera off and on again doesn't do anything.

Seems at least Dave above has his working, so I'm hopeful I'm just doing something wrong, but thus far am not having a great experience.
The SD card in the CamRanger 2 seems to be required. I found that a card that had been formatted in the A7R3 worked fine. There are also a number of camera setup requirements having to do with the PC Remote operation that need to be set. Review this:
https://camranger.com/knowledge-base/camera-setup/
In particular the USB connection needs to be set to PC Remote (menu Setup 4/7), USB Power Supply Off, and PC Remote Settings Still Img. Save Dest. set to PC+Camera.

BTW, be sure your battery is fully charged. It took a few hours for the one I received. It was nearly
...Show more →

Thank you Dave. I had done everything per the instructions, so reached out to customer service. They got back to me about in about an hour and said I should start by formatting the SD card on my computer because it won't work if formatted in camera with every camera model.

I loaded up disk utility on my MBP and formatted as exFAT and, lo and behold, it resolved all issues I described above, including the camera controls in live view. So I guess if for whatever reason the device isn't recognizing the SD card that's going to be the broken link in the chain.
Sep 18, 2019 at 09:16 PM
glencx
Offline
Details
p.2 #16CamRanger 2 for Sony
It seems B&H took the Camranger 2 off their website, I was certain I saw it there a couple of days ago. A mistake or they don't want to take any returns?
Sep 23, 2019 at 12:41 PM
glencx
Offline
Details
p.2 #17CamRanger 2 for Sony
just fyi, I contacted B&H today and they said they posted it too early and Camranger asked them to take it down until early Dec. I then emailed Camranger and they are shipping now with a 2-3 day shipping window.

Sep 24, 2019 at 03:03 PM
saxguy
Offline
Details
p.2 #18CamRanger 2 for Sony
dclark wrote:
I had some time to do some testing with the CamRanger 2 and a A7R3 with a Sony 90mm lens, and using an iPad with the CamRanger 2 app.

The system comes in a nice carrying case and includes a mount for the camera hot shoe. The CamRanger was always a bit of a mess dangling from the camera, so this new arrangement is quite a bit better. The cable that connects the CamRanger 2 and the camera is short but just the right length so there is not a lot of extra cable making a mess. I bought the optional
...Show more →

Dave,

What speed SD card did you use in the CamRanger. Would using a UHS II 300 card in the CamRanger make a difference in clearing the buffer during focus stacking or is the bottleneck the USB Connection?

EDit: Never Mind - saw your post about this above


Edited on Sep 24, 2019 at 03:29 PM · View previous versions
Sep 24, 2019 at 03:20 PM
pasblues
Offline
Details
p.2 #19CamRanger 2 for Sony
Do you have to buy a Camranger for every single camera model you own or can you buy one and use it with different camera models one at a time?

I have 2X models of Canon, 2X models of Fuji and Sony A7R3
Sep 24, 2019 at 03:21 PM
dclark
Online
Details
p.2 #20CamRanger 2 for Sony
pasblues wrote:
Do you have to buy a Camranger for every single camera model you own or can you buy one and use it with different camera models one at a time?

I have 2X models of Canon, 2X models of Fuji and Sony A7R3


You just need a compatible USB cable. The differences are on the camera end of the cable. The CamRanger uses a normal USB type A. CamRanger sells cables with right angle connectors which can make it easier to connect to the camera, but your camera probably came with a cable that works.

Sep 24, 2019 at 05:07 PM
FM ForumsSony ForumJoin Upload & Sell
  
 

You are not logged inLog inRegister