fredmiranda.com Login
This topic is in the 2019 archive. You can read it and like its posts here. It is read only.

Archive 2019CamRanger 2 for Sony

  
 
pasblues
Offline
Details
p.3 #1CamRanger 2 for Sony
dclark wrote:
pasblues wroteDo you have to buy a Camranger for every single camera model you own or can you buy one and use it with different camera models one at a time?

I have 2X models of Canon, 2X models of Fuji and Sony A7R3
You just need a compatible USB cable. The differences are on the camera end of the cable. The CamRanger uses a normal USB type A. CamRanger sells cables with right angle connectors which can make it easier to connect to the camera, but your camera probably came with a cable that works.



So, one Camranger isn't a dedicated unit - but one unit will work and switch around with any of the models listed?

Sep 25, 2019 at 07:21 AM
dclark
Online
Details
p.3 #2CamRanger 2 for Sony
pasblues wrote:
dclark wrote
pasblues wroteDo you have to buy a Camranger for every single camera model you own or can you buy one and use it with different camera models one at a time?

I have 2X models of Canon, 2X models of Fuji and Sony A7R3
You just need a compatible USB cable. The differences are on the camera end of the cable. The CamRanger uses a normal USB type A. CamRanger sells cables with right angle connectors which can make it easier to connect to the camera, but your camera probably came with a cable that works.
So, one Camranger isn't a dedicated unit - but one unit will work and switch around with any of the models listed?



From the CamRanger order page:

https://camranger.com/product/camranger-2/

"Any CamRanger 2 will work with any supported camera, however, the USB cable can be different for different cameras. So please select your camera to ensure the correct cable is included. You can typically use the USB cable that came with your camera."
Sep 25, 2019 at 07:41 AM
2xbass
Offline
Details
p.3 #3CamRanger 2 for Sony
I’m trying to understand whether using the CR 2 you can:

a) move the focus area (for movable focus areas like movable spot, zone, etc.)
b) engage AF-ON on demand
c) see whether Eye AF or Animal Eye AF is detecting eyes

Can anyone speak to this? Thanks.
Dec 16, 2019 at 02:41 PM
wittyphrase
Offline
Details
p.3 #4CamRanger 2 for Sony


2xbass wrote:
I’m trying to understand whether using the CR 2 you can:

a) move the focus area (for movable focus areas like movable spot, zone, etc.)
b) engage AF-ON on demand
c) see whether Eye AF or Animal Eye AF is detecting eyes

Can anyone speak to this? Thanks.


Short answers:

Yes-ish
Yes-ish
No

Longer answers:

You can tap to place spot focus modes only - not zone or expandable flex spots. S/M/L spots only. The in-app indicator will not reflect the appropriate size of the selected spot. You’ll see the same white box no matter the size you pick.

There is a button you can press which will emulate the half press of the shutter. If you keep the AF linked to shutter then you can engage eye-af on demand. My experience is it works most of the time, but not 100%.

But there is no way to see if it’s engaged or locked properly until you review the image.

Dec 16, 2019 at 03:50 PM
jeetsukumaran
Offline
Details
p.3 #5CamRanger 2 for Sony
Anyone tried this with the Sigma 14-24 DG DN lens? Specifically, the focus stacking?
Dec 16, 2019 at 08:41 PM
kbutler84
Offline
Details
p.3 #6CamRanger 2 for Sony
Sorry to bump an old thread. But is there a way to autofocus with camranger 2 with back button focus? I’ve only been able to get autofocus to work when I set focus to the shutter button.
Jun 28, 2020 at 09:43 AM
kbutler84
Offline
Details
p.3 #7CamRanger 2 for Sony

kbutler84 wrote:
Sorry to bump an old thread. But is there a way to autofocus with camranger 2 with back button focus? I’ve only been able to get autofocus to work when I set focus to the shutter button.


Found the answer. Just in case anyone else has the same issue:

You must have auto focus mapped to the shutter button in order for camranger tap to focus to work.
Jun 28, 2020 at 05:07 PM
ncongdon
Offline
Details
p.3 #8CamRanger 2 for Sony
I know this thread has been quiet for a while, but was hoping that those of you using or having used CamRanger 2 with the A7R IV or III might share your more recent experience please. I am still having some issues with this combination (getting Camera Busy error when I try to change focus) but Dave at CamRanger continues to be very responsive, so expect to get this sorted. My application is a bit unusual: focus stacking for panoramas, either landscape or architecture. So there is a need to standardise the focus between shots which will be stitched for the pan. I bought the CamRanger 2 for the automated focus stacking as a solution to this, but found out that auto focus stacking does not work with Sony, only the old manual version. Dave at CamRanger suggests I can get a standard reference point between shots by starting at the closest focus point for the lens and then taking a couple of big jumps. Hoping to try this soon.

My question is what folks are using for focus stacking on the A7R IV or III, and is there anything out there that could help guarantee identical focus between shots (as one normally does when not using focus stacking by locking the focus across all the shits by switching to MF after choosing a focus point)? Any difference in focus between shots leads to alignment problems in PTGUI and other software. Thanks very much for any thoughts on this!

Nathan
Sep 13, 2020 at 03:36 AM
shadow9d9
Offline
Details
p.3 #9CamRanger 2 for Sony
Bump for updates on his focus stacking works with a7riv!
Dec 08, 2020 at 03:53 PM
k-h.a.w
Offline
Details
p.3 #10CamRanger 2 for Sony
Bump for use with A1.
Jul 24, 2021 at 11:37 PM
bobby350z
Offline
Details
p.3 #11CamRanger 2 for Sony
Same here. I was going to buy it as I was looking for a setup which allowed me to shoot from top of a high lightstand/tripod to get a better perspective but I can't find a reliable way to control focus. Only way was to use imaging app and BT remote combination. On my Fuji I can say Point A, Point B and let camera take multiple shots, so simple,
Jul 25, 2021 at 07:46 AM
j4nu
Offline
Details
p.3 #12CamRanger 2 for Sony
bobby350z wrote:
Same here. I was going to buy it as I was looking for a setup which allowed me to shoot from top of a high lightstand/tripod to get a better perspective but I can't find a reliable way to control focus. Only way was to use imaging app and BT remote combination. On my Fuji I can say Point A, Point B and let camera take multiple shots, so simple,


Not sure if they fixed it for all cameras, but with A1 you can control focus using the app only (by tapping on the screen). At least that's what I remember when I played with it shortly after getting A1.
Edit: Ach, yes for focus stacking that's not much of an improvement I guess, I'll check if there's a slider or sth similar to change the focus in steps...
Jul 25, 2021 at 07:49 AM
stuuke
Offline
Details
p.3 #13CamRanger 2 for Sony
Dani Diamond has been posting video on his instagram using the CamRanger and A1. He uses the CamRanger for every shoot and is new to Sony.
Jul 26, 2021 at 09:01 AM
lattesweden
Offline
Details
p.3 #14CamRanger 2 for Sony
dclark wrote:
CamRanger 2 is compatible with Sony cameras

https://camranger.com/product/camranger-2/

Site seems to have stabilized. Orders are being taken with deliveries estimated to start on Sept 16.

Dave


You might want to watch their demo video first. With some Sony cameras (so not all) they have what they call Classic Focus Stacking support. That is really bracketing, which is fine in itself. But it goes according to their own video a little slow. I'd say 1 fps, maybe lower. For product shots of static stuff that can be okey, but then I'd just take Sonys Imaging Edge and tether it and use the free open source software add on that enables focus bracketing without needing to pay for it.
Jul 27, 2021 at 08:29 PM
FM ForumsSony ForumJoin Upload & Sell
  
 

You are not logged inLog inRegister