For those wanting a RF fast light portrait lens, the Sonnetar is fantastic. Size aside, the draw is lovely. And it’s a f1.5 that weights under 200g. Even if someone does release a 90/2 I doubt it will be so small or pleasant.
Got my hood a week or so ago but haven't bothered to open it given the weather here.
Some quick comment, yes, the hood is a bit pointless with standard filters. I'd be in contact with the CSR at 7Artisans to see if there's any fix to it considering the hood seems really nicely built overall speaking. The source of the problem is that they made a little stop-gap at the very front of the mount so that it doesn't slide further back and would stop at the edge of the lens. However, the gap provides no clearance for filters.
I think a way to fix it is to make that stop-gap about 1mm slimmer (just enough to stop from sliding further, but not enough to block the filter. Or alternatively, I find the stop-gap just wide enough for the filter, if they add thread onto it so that we could screw on filters, that might also work, although the downside might be potential vignetting given the FL.
As a current workaround, I'm going to try to borrow a slim profile filter and see how it behaves.
Samples posted here look great. In a departure from the norm, nobody has posted pics of it mounted on an M body.
I have a Minolta CLE on the way here, so I'll soon be in the market for a 28. This looks like a contender, but I'm having a tough time visualizing how big it is, and whether it'll balance well or cause finder blockage.
Anyone want to post pics on a smaller M camera or an a6xx or Fuji? I'd appreciate it muchly, thabks!
It is heavier and bulkier than a Minolta CL/CLE! Perfect for that camera would be the M Rokkor 28/2.8.
It is even unwieldy on a Leica MM.
I think it will balance OK on a Leica SL. It is that big and heavy.
Bear in mind it is an f/1.4 lens!
imagesfromobjects wrote:
Samples posted here look great. In a departure from the norm, nobody has posted pics of it mounted on an M body.
I have a Minolta CLE on the way here, so I'll soon be in the market for a 28. This looks like a contender, but I'm having a tough time visualizing how big it is, and whether it'll balance well or cause finder blockage.
Anyone want to post pics on a smaller M camera or an a6xx or Fuji? I'd appreciate it muchly, thabks!
I'm grabbing a Nokton 40/1.4 first, then go from there. Probably a Skopar or Ultron 28. A little spooked about the Rokkor 28, word on the street is that the only ones getting sold anymore have the "white spot" issue, otherwise they're so good folks are hanging on to them.
realVivek wrote:
It is heavier and bulkier than a Minolta CL/CLE! Perfect for that camera would be the M Rokkor 28/2.8.
It is even unwieldy on a Leica MM.
I think it will balance OK on a Leica SL. It is that big and heavy.
Bear in mind it is an f/1.4 lens!
imagesfromobjects wroteSamples posted here look great. In a departure from the norm, nobody has posted pics of it mounted on an M body.
I have a Minolta CLE on the way here, so I'll soon be in the market for a 28. This looks like a contender, but I'm having a tough time visualizing how big it is, and whether it'll balance well or cause finder blockage.
Anyone want to post pics on a smaller M camera or an a6xx or Fuji? I'd appreciate it muchly, thabks!
imagesfromobjects wrote:
Yeah, kinda what I figured :/
I'm grabbing a Nokton 40/1.4 first, then go from there. Probably a Skopar or Ultron 28. A little spooked about the Rokkor 28, word on the street is that the only ones getting sold anymore have the "white spot" issue, otherwise they're so good folks are hanging on to them.
realVivek wroteIt is heavier and bulkier than a Minolta CL/CLE! Perfect for that camera would be the M Rokkor 28/2.8.
It is even unwieldy on a Leica MM.
I think it will balance OK on a Leica SL. It is that big and heavy.
Bear in mind it is an f/1.4 lens!
imagesfromobjects wroteSamples posted here look great. In a departure from the norm, nobody has posted pics of it mounted on an M body.
I have a Minolta CLE on the way here, so I'll soon be in the market for a 28. This looks like a contender, but I'm having a tough time visualizing how big it is, and whether it'll balance well or cause finder blockage.
Anyone want to post pics on a smaller M camera or an a6xx or Fuji? I'd appreciate it muchly, thabks!
The 28mm f2.8 M-Rokkor lenses are available without the white spots. There is concern that the white spots can develop when subjected to high temperatures. I purchased one without the white spots in December from Japan. Mine only weighs about 5.8 oz including the B+W UV filter, the Minolta Bayonet hood, and the front and rear caps. I will use mine when I can use the lens below about 80 degrees F to avoid developing the white spots.
The other problem with the lenses without the white spots is they are expensive.
Below are some on eBay right now that look good (but as mentioned, they are expensive):
Those actually look decent, but ya. For about the same price you can get a brand new Ultron 28/2. I had the Ultron and stupidly sold it, same with the Skopar 25/4. Ultron was decent on a7, Skopar was awful, but either would be great to use on film. Leaning toward the Ultron for speed, but that Skopar was TINY and would make a killer pocket camera on the CLE. The frame is apparently close to 26mm if you use the whole thing, so I've read it's doable. We'll see...
naturephoto1 wrote: imagesfromobjects wroteYeah, kinda what I figured :/
I'm grabbing a Nokton 40/1.4 first, then go from there. Probably a Skopar or Ultron 28. A little spooked about the Rokkor 28, word on the street is that the only ones getting sold anymore have the "white spot" issue, otherwise they're so good folks are hanging on to them.
realVivek wroteIt is heavier and bulkier than a Minolta CL/CLE! Perfect for that camera would be the M Rokkor 28/2.8.
It is even unwieldy on a Leica MM.
I think it will balance OK on a Leica SL. It is that big and heavy.
Bear in mind it is an f/1.4 lens!
imagesfromobjects wroteSamples posted here look great. In a departure from the norm, nobody has posted pics of it mounted on an M body.
I have a Minolta CLE on the way here, so I'll soon be in the market for a 28. This looks like a contender, but I'm having a tough time visualizing how big it is, and whether it'll balance well or cause finder blockage.
Anyone want to post pics on a smaller M camera or an a6xx or Fuji? I'd appreciate it muchly, thabks!The 28mm f2.8 M-Rokkor lenses are available without the white spots. There is concern that the white spots can develop when subjected to high temperatures. I purchased one without the white spots in December from Japan. Mine only weighs about 5.8 oz including the B+W UV filter, the Minolta Bayonet hood, and the front and rear caps. I will use mine when I can use the lens below about 80 degrees F to avoid developing the white spots.
The other problem with the lenses without the white spots is they are expensive.
Below are some on eBay right now that look good (but as mentioned, they are expensive):
The size and weight look great, as do the samples. I even kinda like the ring flare. I'm only ruling it out for using on Minolta CLE, it would be fine on any "normal" sized camera.
fsiagian wrote:
Ordering one, $437 and 8% ebay bucks from China. I like what I have seen so far and I’m after the 1.4 rendering. So, size and weight are ok with me.
imagesfromobjects wrote:
Samples posted here look great. In a departure from the norm, nobody has posted pics of it mounted on an M body.
I have a Minolta CLE on the way here, so I'll soon be in the market for a 28. This looks like a contender, but I'm having a tough time visualizing how big it is, and whether it'll balance well or cause finder blockage.
Anyone want to post pics on a smaller M camera or an a6xx or Fuji? I'd appreciate it muchly, thabks!
Dark and not very sharp, but this is the 28/1.4 on a Leica M (262)
If your lens is one of the first 100 (mine is within the fifty), it will have the ring flare. The one made after that first batch do not exhibit this ring flare. As in the pictures I posted above, the flare goes off when stopped down slightly (~1.6) and you can mark it as I did.
Daum wrote:
Does anyone know how to tell the difference between version 1 (flare) and version 2 (flare reduced)?
realVivek wrote:
If your lens is one of the first 100 (mine is within the fifty), it will have the ring flare. The one made after that first batch do not exhibit this ring flare. As in the pictures I posted above, the flare goes off when stopped down slightly (~1.6) and you can mark it as I did.
Daum wroteDoes anyone know how to tell the difference between version 1 (flare) and version 2 (flare reduced)?
I'm not quite sure it's the only first 100. I mean, they are volume pushers and the flare became an issue quite some time AFTER it started shipping which then 7A adjusted its processes to eliminate the issue.
The V1 is non-existent now. Any new copies you can find on the market are nonflare ones. So I think you'd be ok. The chances of picking a V1 at this stage is close to none.
Now, if you actually do want to find one with flare, that's whole other topic. You'd have to go on the secondary market after owners who held onto a V1 (7A was offering free exchanges I believe. And many who complained actually sent their V1s in) that are willing to let go.
Here is a quick couple of pictures of the 28mm on a CLE from my iPhone. Very front heavy, but held by the lens, not too bad. It does block quite a bit of the viewfinder.