p.10 #3FE 100-400 issues with and without 1.4 extender
bluloo wrote:
Thanks.
I wonder if you might be able to sweet-talk someone a little higher up in CS into looking at this thread, and the examples we shared.
I don't usually take photos in which the corners aren't occupied by busy subject matter, so I likely wouldn't have known until sometime in the future had it not been for these posts.
I'm guessing more people are in a similar position.
Plus, some here post photos that seem to lack any sort of vignetting, using the same combo. That seems like a significant difference not explained by normal manufacturing variation (an OOS result), so there's most definitely something going on that Sony should address, IMO.
...Show more →naturephoto1 wrotebluloo wrotenaturephoto1 wroteMy Sony 1.4X Teleconverter was delivered at about 11:30 this morning with Precision Camera Repair. Keep your fingers crossed that something good will come of this.
RichGood luck with the fix!
Mine is currently not showing in FedEx's tracking system. Dropped it off Saturday. So, looks like a call to Sony tomorrow, to have Fed Ex investigate...Good Luck with yours. I suspect that Precision will not fix the Teleconverter. I am concerned that they will say that the Teleconverter is fine and meets Factory Specs. If so, then the fight with Sony will begin and I will send them the images with the vignetting.
Rich
I think I'll suck it up and take out the rear baffle of the 1.4xTC to see if it has any effect at all . . . never know what could happen. I also have only shot the TC at 400mm, I'll see if the pattern I'm seeing goes away at shorter focal lengths.
p.10 #4FE 100-400 issues with and without 1.4 extender
This is what I got from Precision Camera after my enquiry about the vignetting issue with my Sony FE 1.4x teleconverter. It took them 5 days to answer me,
-----
Hello,
The standard repair rate for your Sony 1.4X Teleconverter is $241.50. This includes return shipping, a 90 day warranty on any of the work performed, bringing your unit back to factory specifications, and a complete cleaning.
Please fill out a web order at www.precisioncamera.com, include a copy of the sales receipt and send it along with the unit for warranty repair. We should contact you with the technician's recommendations about two or three days after we have received your unit. If you refuse the repair, you may only responsible for the assessment and return shipping fee of $52.50. After approval, you should have your unit back in about 5 to 7 business days as long as we do not incur any issues.
Please feel free to contact us at 860-272-2100 with any further questions.
p.10 #5FE 100-400 issues with and without 1.4 extender
Fred Miranda wrote:
This is what I got from Precision Camera after my enquiry about the vignetting issue with my Sony FE 1.4x teleconverter. It took them 5 days to answer me,
-----
Hello,
The standard repair rate for your Sony 1.4X Teleconverter is $241.50. This includes return shipping, a 90 day warranty on any of the work performed, bringing your unit back to factory specifications, and a complete cleaning.
Please fill out a web order at www.precisioncamera.com, include a copy of the sales receipt and send it along with the unit for warranty repair. We should contact you with the technician's recommendations about two or three days after we have received your unit. If you refuse the repair, you may only responsible for the assessment and return shipping fee of $52.50. After approval, you should have your unit back in about 5 to 7 business days as long as we do not incur any issues.
Please feel free to contact us at 860-272-2100 with any further questions....Show more →
I'm sorry, I am coming late to this. Is it outside of the warranty period?
p.10 #6FE 100-400 issues with and without 1.4 extender
Fred Miranda wrote:
This is what I got from Precision Camera after my enquiry about the vignetting issue with my Sony FE 1.4x teleconverter. It took them 5 days to answer me,
-----
Hello,
The standard repair rate for your Sony 1.4X Teleconverter is $241.50. This includes return shipping, a 90 day warranty on any of the work performed, bringing your unit back to factory specifications, and a complete cleaning.
Please fill out a web order at www.precisioncamera.com, include a copy of the sales receipt and send it along with the unit for warranty repair. We should contact you with the technician's recommendations about two or three days after we have received your unit. If you refuse the repair, you may only responsible for the assessment and return shipping fee of $52.50. After approval, you should have your unit back in about 5 to 7 business days as long as we do not incur any issues.
Please feel free to contact us at 860-272-2100 with any further questions....Show more →
I think this should be a recall, not an out-of-warranty repair at your cost. We didn't do anything to cause the vignetting. What are they repairing anyway??
p.10 #7FE 100-400 issues with and without 1.4 extender
I thought that was a ridiculous response for something Sony fixed silently. (Sony reps confirmed that to other members in this thread). We saw that with our own tests as well.
I could never reach Precision Camera by phone. I left them 3 voicemails and 2 emails and only got answer today with the above...I purchased this teleconverter when the 100-400GM was released so it's definitely out of warranty.
This is very disappointing but I will still try contacting them by phone.
p.10 #8FE 100-400 issues with and without 1.4 extender
I just got off the phone with a Precision Camera's customer service rep. They are unaware of any issue with the 1.4x teleconverter and said they can't replace items since because they are only a repair facility. She repeated what I was told by email that if I want to send the teleconverter in, the repair price is @241.50 because it's out of warranty. So, there is a repair?
I asked to talk to a manager or supervisor but they were not available. Perhaps they will call me tomorrow.
Sony dropped the ball on this one. This should have been a recall and customers should not have to go through this.
p.10 #9FE 100-400 issues with and without 1.4 extender
Fred Miranda wrote:
I just got off the phone with a Precision Camera's customer service rep. They are unaware of any issue with the 1.4x teleconverter and said they can't replace items since because they are only a repair facility. She repeated was I was told by email that if I want to send the teleconverter in, the repair price is @241.50 because it's out of warranty. So, there is a repair?
I asked to talk to a manager or supervisor but they were not available. Perhaps they will call me tomorrow.
Sony dropped the ball on this one. This should have been a recall and customers should not have to go through this....Show more →
Hi Fred,
This is very unfortunate for those with out of warranty and even in warranty 1.4X teleconverters. The price of repair and shipping also sounds high with close to a 50% charge of a $550 dollar teleconverter.
For what it is worth, the Precision Camera website shows my teleconverter (that has a little over 3 months left on the warranty) as being in for repair. As I mentioned earlier, I am concerned that Precision will find the teleconverter according to spec, not repair the issue, and return it to me.
p.10 #10FE 100-400 issues with and without 1.4 extender
Everyone was living happily until one person had to say there was a problem.
Because I shoot mostly jpg, I really didn't see this issue until I saw this post.
I'll be interested how it work after jhinkey tries it without the baffles.
Could be a little Dremel action in the corners of the baffles could fix it.
(merely a suggestion)
p.10 #11FE 100-400 issues with and without 1.4 extender
I wouldn't expect there to be a difference is it's the same part, but maybe we can take caliper-based measurements of various aspects of the baffle to compare good and problematic units.
p.10 #12FE 100-400 issues with and without 1.4 extender
bluloo wrote: jhinkey wroteI guess we actually get a 600mm effective focal length lens if we crop out the cornersOr we could make photos with rounded corners so they look like what we thought everything futuristic looked like, in 1970.
p.10 #13FE 100-400 issues with and without 1.4 extender
davev wrote:
Everyone was living happily until one person had to say there was a problem.
Because I shoot mostly jpg, I really didn't see this issue until I saw this post.
I'll be interested how it work after jhinkey tries it without the baffles.
Could be a little Dremel action in the corners of the baffles could fix it.
(merely a suggestion)
Likely later in the week and after a shot of something to calm my nerves. At least I have the right screwdrivers.
p.10 #14FE 100-400 issues with and without 1.4 extender
Although I can't remember how well all these worked, if they all had vignetting, but
I can see a bit of a difference in how they're made.
Maybe Sony should have left if round next to the camera.
Various 1.4, 1.5, 2x EF mount tc's, and one E mount 2x tc.
p.10 #15FE 100-400 issues with and without 1.4 extender
davev wrote:
Everyone was living happily until one person had to say there was a problem.
Because I shoot mostly jpg, I really didn't see this issue until I saw this post.
I'll be interested how it work after jhinkey tries it without the baffles.
Could be a little Dremel action in the corners of the baffles could fix it.
(merely a suggestion)
This is not one person had to say there was a problem. After seeing the samples posted in those threads, are you not convinced at least some of the TCs have problems?
p.10 #16FE 100-400 issues with and without 1.4 extender
davev wrote:
Everyone was living happily until one person had to say there was a problem.
Because I shoot mostly jpg, I really didn't see this issue until I saw this post.
I'll be interested how it work after jhinkey tries it without the baffles.
Could be a little Dremel action in the corners of the baffles could fix it.
(merely a suggestion)
It was immediately obvious to me.
My initial investigation says that a Dremel is most likely not going to be the solution.
p.10 #18FE 100-400 issues with and without 1.4 extender
Easy guys, I was kidding.
It's good to have people that find things that others (like me) wouldn't think about.
I shoot mostly jpg's, and I end up cropping 98% of my shots far enough to where the vignetting wouldn't be seen.
p.10 #19FE 100-400 issues with and without 1.4 extender
kdrk888 wrote:
This is not one person had to say there was a problem. After seeing the samples posted in those threads, are you not convinced at least some of the TCs have problems?
I'll be honest though Douglas and say that I'd imagine for most people some vignetting isn't much of an issue for two reasons :
a) most people don't shoot at 800mm/560mm because they are interested in the whole frame scene (atmospheric conditions/interference at those FLs mean you are highly unlikely to get the best out of any TC-lens combination), it's for wildlife/birds/safari and you are going to crop out the corners anyway (at least I always do) and ....
b) PP will remove most / all of the vignetting
I'll admit the reflection of the interior 'corner edges' of the TC is potentially more of an issue.
Basically this is just to say it isn't an issue for me personally because I don't need those corners (even though I accept a few, and generally only very few, will). This isn't to absolve Sony from blame but just saying I don't see this is a 'in real world use' problem per se. Just as the FC of the VC 35/1.7 has been commented on here by a few as a reason not to buy it, however it has 'never' been an issue for me and has never stopped me printing/selling shots from it. Most issues on FM/DPR etc. tend to be blown out of all proportion as people seek perfection.
EDIT. For the purposes of this post I'm assuming the vignetting is not repairable.
p.10 #20FE 100-400 issues with and without 1.4 extender
I have a question having just got this setup today. When you twist the lens onto the extender, are you hearing a click and having it lock? Mine seems like i have to move the lens about 1mm backwards and then manually click the little extender button to lock it in place. Thoughts?