fredmiranda.com Login
This topic is in the 2018 archive. You can read it and like its posts here. It is read only.

Archive 2018FE 100-400 issues with and without 1.4 extender

  
 
Fred Miranda
Offline
Admin
Upload & Sell: On
Details
p.15 #1FE 100-400 issues with and without 1.4 extender
naturephoto1 wrote:
My 1.4X TC is still at Precision awaiting parts for the repair. As of tomorrow it will be 3 weeks and I will give Precision a phone call about when they anticipate receiving the parts and completing the repair. At this point, I do not expect any positive word and anticipate calling Sony after the discussion.

Next week Precicion will have been waiting for parts for 4 weeks/1 month and this will account for 1 month of what had been 3 months of my remaining warranty.

I need the TC back shortly as I will be going to Florida in 7 weeks
...Show more →

Hi Rich,
This sounds very frustrating. Did they tell you which parts they are waiting for?
Mar 18, 2019 at 07:07 PM
naturephoto1
Offline
Details
p.15 #2FE 100-400 issues with and without 1.4 extender
Fred Miranda wrote:
naturephoto1 wroteMy 1.4X TC is still at Precision awaiting parts for the repair. As of tomorrow it will be 3 weeks and I will give Precision a phone call about when they anticipate receiving the parts and completing the repair. At this point, I do not expect any positive word and anticipate calling Sony after the discussion.

Next week Precicion will have been waiting for parts for 4 weeks/1 month and this will account for 1 month of what had been 3 months of my remaining warranty.

I need the TC back shortly as I will be going to Florida in 7 weeks and will be taking photos of birds. At this point I am concerned that Precision and Sony will let me down and I will have neither the TC back in time to check that it is in good working order nor Sony sending me a good working replacement.

Rich
Hi Rich,
This sounds very frustrating. Did they tell you which parts they are waiting for?


Hi Fred,

I hope they can tell me that tomorrow when I call them. I intend to call them a little after 9:00 AM eastern since they are in CT.

Rich
Mar 18, 2019 at 07:09 PM
bluloo
Offline
Details
p.15 #3FE 100-400 issues with and without 1.4 extender
naturephoto1 wrote:
Fred Miranda wrote
naturephoto1 wroteMy 1.4X TC is still at Precision awaiting parts for the repair. As of tomorrow it will be 3 weeks and I will give Precision a phone call about when they anticipate receiving the parts and completing the repair. At this point, I do not expect any positive word and anticipate calling Sony after the discussion.

Next week Precicion will have been waiting for parts for 4 weeks/1 month and this will account for 1 month of what had been 3 months of my remaining warranty.

I need the TC back shortly as I will be going to Florida in 7 weeks and will be taking photos of birds. At this point I am concerned that Precision and Sony will let me down and I will have neither the TC back in time to check that it is in good working order nor Sony sending me a good working replacement.

Rich
Hi Rich,
This sounds very frustrating. Did they tell you which parts they are waiting for?
Hi Fred,

I hope they can tell me that tomorrow when I call them. I intend to call them a little after 9:00 AM eastern since they are in CT.

Rich


If they can’t repair it in a timely manner, they should replace it. Hope they sort it out.

Mar 18, 2019 at 07:37 PM
shac
Offline
Details
p.15 #4FE 100-400 issues with and without 1.4 extender

Rich

If they can’t repair it in a timely manner, they should replace it. Hope they sort it out.



Totally agree Rich.
Strange that like yours, mine was under warranty and I sent it to the same place as you but I was given a new one rather than it being repaired ?!!!

Good luck
Mar 18, 2019 at 07:49 PM
naturephoto1
Offline
Details
p.15 #5FE 100-400 issues with and without 1.4 extender
OK, I finally was able to speak with a body at Precision at about 9:43 this morning. The rep indicated that they were awaiting an optical block for the the TC from Sony. Normally they get parts I think she said in 7 to 9? business days. This is now 3 weeks. In any case, she was going to try to check to get at ETA about this and to call me back. She indicated that it may take about a day to get this information. I indicated that this is starting to an issue with timing since I would be traveling in 7 weeks to take photos of birds and needed the TC. I also indicated that this was really eating into my remaining warranty coverage.

I confirmed with her that they were waiting for and going to replace the optics. She said yes. This is crazy if you ask me. At this point, Sony should have just replaced the TC. The optics are certainly the most expensive part of the TC. And even if they replace the optical block, we still don't and won't know if this will solve the heavy vignetting that I have been getting.

Rich
Mar 19, 2019 at 07:52 AM
naturephoto1
Offline
Details
p.15 #6FE 100-400 issues with and without 1.4 extender
naturephoto1 wrote:
OK, I finally was able to speak with a body at Precision at about 9:43 this morning. The rep indicated that they were awaiting an optical block for the the TC from Sony. Normally they get parts I think she said in 7 to 9? business days. This is now 3 weeks. In any case, she was going to try to check to get at ETA about this and to call me back. She indicated that it may take about a day to get this information. I indicated that this is starting to an issue with timing since I would
...Show more →

As a follow-up, I just received a phone call from Barbara, the Rep from Precision that I spoke with this morning. She indicated that right after I had spoken with her this morning, the part had been delivered to them. She indicated that the TC and the part were going back into repair and should be completed within the next couple of days. This now also agrees with what Precision is indicating on their website which now shows that the TC is in repair.

I will keep my fingers crossed that the replacement optical block will resolve and correct my problems with the very heavy vignetting that has been noted.

I will keep everyone informed as to when I receive the TC back in my hands and provide results after I check the performance with my 100-400mm GM lens when the combination yields 560mm at f8.

Rich

Mar 19, 2019 at 12:43 PM
bluloo
Offline
Details
p.15 #7FE 100-400 issues with and without 1.4 extender
naturephoto1 wrote:
naturephoto1 wroteOK, I finally was able to speak with a body at Precision at about 9:43 this morning. The rep indicated that they were awaiting an optical block for the the TC from Sony. Normally they get parts I think she said in 7 to 9? business days. This is now 3 weeks. In any case, she was going to try to check to get at ETA about this and to call me back. She indicated that it may take about a day to get this information. I indicated that this is starting to an issue with timing since I would be traveling in 7 weeks to take photos of birds and needed the TC. I also indicated that this was really eating into my remaining warranty coverage.

I confirmed with her that they were waiting for and going to replace the optics. She said yes. This is crazy if you ask me. At this point, Sony should have just replaced the TC. The optics are certainly the most expensive part of the TC. And even if they replace the optical block, we still don't and won't know if this will solve the heavy vignetting that I have been getting.

Rich
As a follow-up, I just received a phone call from Barbara, the Rep from Precision that I spoke with this morning. She indicated that right after I had spoken with her this morning, the part had been delivered to them. She indicated that the TC and the part were going back into repair and should be completed within the next couple of days. This now also agrees with what Precision is indicating on their website which now shows that the TC is in repair.

I will keep my fingers crossed that the replacement optical block will resolve and correct my problems
...Show more →

Great news. Sounds like it’s not a baffle related issue, but is related to the optics assembly.
Mar 19, 2019 at 01:56 PM
jhinkey
Offline
Details
p.15 #8FE 100-400 issues with and without 1.4 extender
bluloo wrote:
naturephoto1 wrote
naturephoto1 wroteOK, I finally was able to speak with a body at Precision at about 9:43 this morning. The rep indicated that they were awaiting an optical block for the the TC from Sony. Normally they get parts I think she said in 7 to 9? business days. This is now 3 weeks. In any case, she was going to try to check to get at ETA about this and to call me back. She indicated that it may take about a day to get this information. I indicated that this is starting to an issue with timing since I would be traveling in 7 weeks to take photos of birds and needed the TC. I also indicated that this was really eating into my remaining warranty coverage.

I confirmed with her that they were waiting for and going to replace the optics. She said yes. This is crazy if you ask me. At this point, Sony should have just replaced the TC. The optics are certainly the most expensive part of the TC. And even if they replace the optical block, we still don't and won't know if this will solve the heavy vignetting that I have been getting.

Rich
As a follow-up, I just received a phone call from Barbara, the Rep from Precision that I spoke with this morning. She indicated that right after I had spoken with her this morning, the part had been delivered to them. She indicated that the TC and the part were going back into repair and should be completed within the next couple of days. This now also agrees with what Precision is indicating on their website which now shows that the TC is in repair.

I will keep my fingers crossed that the replacement optical block will resolve and correct my problems with the very heavy vignetting that has been noted.

I will keep everyone informed as to when I receive the TC back in my hands and provide results after I check the performance with my 100-400mm GM lens when the combination yields 560mm at f8.

Rich
Great news. Sounds like it’s not a baffle related issue, but is related to the optics assembly.


Uh, I would wait 'til we see images from the TC with the new optical block installed . . . .
Mar 19, 2019 at 09:20 PM
bluloo
Offline
Details
p.15 #9FE 100-400 issues with and without 1.4 extender
jhinkey wrote:
bluloo wrote
naturephoto1 wrote
naturephoto1 wroteOK, I finally was able to speak with a body at Precision at about 9:43 this morning. The rep indicated that they were awaiting an optical block for the the TC from Sony. Normally they get parts I think she said in 7 to 9? business days. This is now 3 weeks. In any case, she was going to try to check to get at ETA about this and to call me back. She indicated that it may take about a day to get this information. I indicated that this is starting to an issue with timing since I would be traveling in 7 weeks to take photos of birds and needed the TC. I also indicated that this was really eating into my remaining warranty coverage.

I confirmed with her that they were waiting for and going to replace the optics. She said yes. This is crazy if you ask me. At this point, Sony should have just replaced the TC. The optics are certainly the most expensive part of the TC. And even if they replace the optical block, we still don't and won't know if this will solve the heavy vignetting that I have been getting.

Rich
As a follow-up, I just received a phone call from Barbara, the Rep from Precision that I spoke with this morning. She indicated that right after I had spoken with her this morning, the part had been delivered to them. She indicated that the TC and the part were going back into repair and should be completed within the next couple of days. This now also agrees with what Precision is indicating on their website which now shows that the TC is in repair.

I will keep my fingers crossed that the replacement optical block will resolve and correct my problems with the very heavy vignetting that has been noted.

I will keep everyone informed as to when I receive the TC back in my hands and provide results after I check the performance with my 100-400mm GM lens when the combination yields 560mm at f8.

Rich
Great news. Sounds like it’s not a baffle related issue, but is related to the optics assembly.
Uh, I would wait 'til we see images from the TC with the new optical block installed . . . .


Right, but they wouldn't choose to replace an expensive optics group, if the issue were related to a plastic baffle.

Assuming they understand what the problem actually is.
Mar 19, 2019 at 09:22 PM
naturephoto1
Offline
Details
p.15 #10FE 100-400 issues with and without 1.4 extender
Precision is now showing that my TC repair has been completed and that it has been shipped. FEDEX is showing that a shipping label has been created and that the package is scheduled for delivery by 8:00 PM on Friday. Unfortunately, Precision did not mark the package as signature required, but I will be on the look-out for the package on Friday.

Depending upon when the package arrives and the weather, I will try to get images taken with the TC, my 100-400mm GM, and my A7rIII as quickly as possible and to then post the results. Hopefully the results will be acceptable, otherwise, another call to Sony and/or Precison.

Rich

Mar 20, 2019 at 08:53 AM
Douglas L
Online
Details
p.15 #11FE 100-400 issues with and without 1.4 extender
I am wondering if Fred has been communicating with Precision/Sony recently after they gave him a TC to test?
Mar 20, 2019 at 09:28 AM
Fred Miranda
Offline
Admin
Upload & Sell: On
Details
p.15 #12FE 100-400 issues with and without 1.4 extender
kdrk888 wrote:
I am wondering if Fred has been communicating with Precision/Sony recently after they gave him a TC to test?


Yes, I am in communication with Precision Camera.

They switched my TC with serial 1803xxxx to another with serial 1807xxxx. I also tested a brand new TC (Serial 1815xxxx) and it performed just like the one they sent me which shows less vignetting compared to my previous one but vignetting is still present without any camera or post-processing correction.

From all the tests I did, it looks like serial number below 1805xxxx show less vignetting compared to earlier batches and TCs after this range perform similarly in this regard.
Mar 20, 2019 at 10:09 AM
eyal
Offline
Details
p.15 #13FE 100-400 issues with and without 1.4 extender
Don't want to hijack this thread but hoping those with experience and interest in the 100-400 can look at some blue sky shots for me.

I've been shooting with the 100-400 for almost a year now and found it to be a good lens but had noticed some odd vignetting/bright spots on uniform areas such as a blue sky. I was out this morning shooting the full moon setting and decided to do a quick check of the sensor on the blue sky to make sure it had no dust spots. I ran it from 5.6-40 and, on getting home, found the vignetting was obvious even at f/8 where it appears more as a bright circle in the middle of the frame.

I put together a pdf (a slideshow movie file showed bad digitization/compression) from Lightroom with a sequence at 100mm where it is not visible to my eyes, at 400mm where is is quite obvious and also tested against my Canon 200 as it is the only other long focal length I have. I have lens compensation flagged on (Auto) in camera and LR had the Enable Profile Correction checked with both distortion and vignetting at 100.

PDF is full resolution exported using the slideshow function in LR. Settings shown at bottom of each frame/page.
PDF: https://www.dropbox.com/s/2fnp2n8x8na2srh/Lens.pdf?dl=0

Mar 20, 2019 at 10:26 AM
jhinkey
Offline
Details
p.15 #14FE 100-400 issues with and without 1.4 extender
bluloo wrote:
jhinkey wrote
bluloo wrote
naturephoto1 wrote
naturephoto1 wroteOK, I finally was able to speak with a body at Precision at about 9:43 this morning. The rep indicated that they were awaiting an optical block for the the TC from Sony. Normally they get parts I think she said in 7 to 9? business days. This is now 3 weeks. In any case, she was going to try to check to get at ETA about this and to call me back. She indicated that it may take about a day to get this information. I indicated that this is starting to an issue with timing since I would be traveling in 7 weeks to take photos of birds and needed the TC. I also indicated that this was really eating into my remaining warranty coverage.

I confirmed with her that they were waiting for and going to replace the optics. She said yes. This is crazy if you ask me. At this point, Sony should have just replaced the TC. The optics are certainly the most expensive part of the TC. And even if they replace the optical block, we still don't and won't know if this will solve the heavy vignetting that I have been getting.

Rich
As a follow-up, I just received a phone call from Barbara, the Rep from Precision that I spoke with this morning. She indicated that right after I had spoken with her this morning, the part had been delivered to them. She indicated that the TC and the part were going back into repair and should be completed within the next couple of days. This now also agrees with what Precision is indicating on their website which now shows that the TC is in repair.

I will keep my fingers crossed that the replacement optical block will resolve and correct my problems with the very heavy vignetting that has been noted.

I will keep everyone informed as to when I receive the TC back in my hands and provide results after I check the performance with my 100-400mm GM lens when the combination yields 560mm at f8.

Rich
Great news. Sounds like it’s not a baffle related issue, but is related to the optics assembly.
Uh, I would wait 'til we see images from the TC with the new optical block installed . . . .
Right, but they wouldn't choose to replace an expensive optics group, if the issue were related to a plastic baffle.

Assuming they understand what the problem actually is.


I assume they will work like some car mechanics - replace expensive stuff until the problem is solved . . .

You are assuming that someone at Sony is thinking about this. Likely someone sees that a TC isn't working optically, so the stock solution is to replace the optics . . . .

We'll see shortly. I'm not optimistic.
Mar 20, 2019 at 10:29 AM
bluloo
Offline
Details
p.15 #15FE 100-400 issues with and without 1.4 extender
jhinkey wrote:
We'll see shortly. I'm not optimistic.


Let's keep our fingers crossed.
Mar 20, 2019 at 10:33 AM
naturephoto1
Offline
Details
p.15 #16FE 100-400 issues with and without 1.4 extender
jhinkey wrote:
bluloo wrote
jhinkey wrote
bluloo wrote
naturephoto1 wrote
naturephoto1 wroteOK, I finally was able to speak with a body at Precision at about 9:43 this morning. The rep indicated that they were awaiting an optical block for the the TC from Sony. Normally they get parts I think she said in 7 to 9? business days. This is now 3 weeks. In any case, she was going to try to check to get at ETA about this and to call me back. She indicated that it may take about a day to get this information. I indicated that this is starting to an issue with timing since I would be traveling in 7 weeks to take photos of birds and needed the TC. I also indicated that this was really eating into my remaining warranty coverage.

I confirmed with her that they were waiting for and going to replace the optics. She said yes. This is crazy if you ask me. At this point, Sony should have just replaced the TC. The optics are certainly the most expensive part of the TC. And even if they replace the optical block, we still don't and won't know if this will solve the heavy vignetting that I have been getting.

Rich
As a follow-up, I just received a phone call from Barbara, the Rep from Precision that I spoke with this morning. She indicated that right after I had spoken with her this morning, the part had been delivered to them. She indicated that the TC and the part were going back into repair and should be completed within the next couple of days. This now also agrees with what Precision is indicating on their website which now shows that the TC is in repair.

I will keep my fingers crossed that the replacement optical block will resolve and correct my problems with the very heavy vignetting that has been noted.

I will keep everyone informed as to when I receive the TC back in my hands and provide results after I check the performance with my 100-400mm GM lens when the combination yields 560mm at f8.

Rich
Great news. Sounds like it’s not a baffle related issue, but is related to the optics assembly.
Uh, I would wait 'til we see images from the TC with the new optical block installed . . . .
Right, but they wouldn't choose to replace an expensive optics group, if the issue were related to a plastic baffle.

Assuming they understand what the problem actually is.
I assume they will work like some car mechanics - replace expensive stuff until the problem is solved . . .

You are assuming that someone at Sony is thinking about this. Likely someone sees that a TC isn't working optically, so the stock solution is to replace the optics . . . .

We'll see shortly. I'm not optimistic.


But, since my TC is still under warranty it is costing Sony for the part and not me. I would think that Sony would be less likely to want to pay more for a repair than a small amount.

Rich

Mar 20, 2019 at 10:41 AM
jhinkey
Offline
Details
p.15 #17FE 100-400 issues with and without 1.4 extender
naturephoto1 wrote:
jhinkey wrote
bluloo wrote
jhinkey wrote
bluloo wrote
naturephoto1 wroteAs a follow-up, I just received a phone call from Barbara, the Rep from Precision that I spoke with this morning. She indicated that right after I had spoken with her this morning, the part had been delivered to them. She indicated that the TC and the part were going back into repair and should be completed within the next couple of days. This now also agrees with what Precision is indicating on their website which now shows that the TC is in repair.

I will keep my fingers crossed that the replacement optical block will resolve and correct my problems with the very heavy vignetting that has been noted.

I will keep everyone informed as to when I receive the TC back in my hands and provide results after I check the performance with my 100-400mm GM lens when the combination yields 560mm at f8.

Rich
Great news. Sounds like it’s not a baffle related issue, but is related to the optics assembly.
Uh, I would wait 'til we see images from the TC with the new optical block installed . . . .
Right, but they wouldn't choose to replace an expensive optics group, if the issue were related to a plastic baffle.

Assuming they understand what the problem actually is.
I assume they will work like some car mechanics - replace expensive stuff until the problem is solved . . .

You are assuming that someone at Sony is thinking about this. Likely someone sees that a TC isn't working optically, so the stock solution is to replace the optics . . . .

We'll see shortly. I'm not optimistic.
But, since my TC is still under warranty it is costing Sony for the part and not me. I would think that Sony would be less likely to want to pay more for a repair than a small amount.

Rich



Don't be throwing logic into this discussion!
Mar 20, 2019 at 11:54 AM
naturephoto1
Offline
Details
p.15 #18FE 100-400 issues with and without 1.4 extender
My 1.4X TC was returned yesterday from Precision after they replaced the optical block of the TC. A short time ago, I did some quick tests with the 1.4X TC with my 100-400mm GM lens and my A7rIII. The whole set up was tripod mounted. The lens has a thin or fairly thin B+W UV filter and the lens hood attached to the lens as was the case for my previous tests before the repair.

This is the link to my original tests of the same set-up before Precision replaced the optical block of the TC:

https://www.fredmiranda.com/forum/topic/1535862/3#14760391

If you think that I should run the tests again without the filter and/or the hood, possibly tomorrow.

What does everyone think about these results? Keep things as they are? Complain to Precision? Complain again to Sony? I now only have about 2 months of warranty left on the TC and I will need it for taking photos of birds in Florida for 10 days from the first full week in May.

Maybe I should also check the lens alone at 400mm.

Rich



© naturephoto1 2019


560mm, f8, Lens compensation off, LR profile off





© naturephoto1 2019


560mm, f8, Lens compensation off, LR profile on





© naturephoto1 2019


560mm, f8, Lens compensation on, LR profile off





© naturephoto1 2019


560mm, f8, Lens compensation on, LR profile on

Mar 23, 2019 at 04:26 PM
Douglas L
Online
Details
p.15 #19FE 100-400 issues with and without 1.4 extender
Thanks for the update Rich. Like I said before, I am on my 3rd copy which was sent to me by Sony as a replacement for my second copy. Same deal. I gave up. Now I just turn on the lens comp/shading in the camera, the problem is pretty much gone.
Mar 23, 2019 at 04:54 PM
jhinkey
Offline
Details
p.15 #20FE 100-400 issues with and without 1.4 extender
naturephoto1 wrote:
My 1.4X TC was returned yesterday from Precision after they replaced the optical block of the TC. A short time ago, I did some quick tests with the 1.4X TC with my 100-400mm GM lens and my A7rIII. The whole set up was tripod mounted. The lens has a thin or fairly thin B+W UV filter and the lens hood attached to the lens as was the case for my previous tests before the repair.

This is the link to my original tests of the same set-up before Precision replaced the optical block of the TC:

https://www.fredmiranda.com/forum/topic/1535862/3#14760391

If you think that I should
...Show more →

Nope, this seems to be a characteristic of the TC - that's as good as it gets right now.
Mar 23, 2019 at 06:25 PM
FM ForumsSony ForumJoin Upload & Sell
  
 

You are not logged inLog inRegister