fredmiranda.com Login
This topic is in the 2018 archive. You can read it and like its posts here. It is read only.

Archive 2018FE 100-400 issues with and without 1.4 extender

  
 
naturephoto1
Offline
Details
p.8 #1FE 100-400 issues with and without 1.4 extender
bluloo wrote:
So, just finishing up with Sony support. They're supposed to be processing an exchange for another 1.4 TC. They say that some TCs have an issue that can cause the vignetting with e-mount lenses - but not all TCs in the same serial number range have this issue.

The tech didn't know the source.

FYI, YMMV etc.


Did Sony support give any suggestion as to how we should proceed with so many of us here on FM reporting this issue?

Should we call them and discuss an exchange? What phone number should we use?

Thanks.

Rich

Feb 22, 2019 at 01:42 PM
bluloo
Offline
Details
p.8 #2FE 100-400 issues with and without 1.4 extender
naturephoto1 wrote:
bluloo wroteSo, just finishing up with Sony support. They're supposed to be processing an exchange for another 1.4 TC. They say that some TCs have an issue that can cause the vignetting with e-mount lenses - but not all TCs in the same serial number range have this issue.

The tech didn't know the source.

FYI, YMMV etc.
Did Sony support give any suggestion as to how we should proceed with so many of us here on FM reporting this issue?

Should we call them and discuss an exchange? What phone number should we use?

Thanks.

Rich



I googled Sony camera support, chose my product, and selected the chat option.

All he could say to me was that certain serial numbers may be impacted, and that not every unit in that range would display the issue.
I asked if it was related to a part change, or manufacturing issue and he didn’t know. But he guessed a mfg issue, FWIW.
Feb 22, 2019 at 02:01 PM
shac
Offline
Details
p.8 #3FE 100-400 issues with and without 1.4 extender
I started with a chat and then moved to a telephone call with Sony. In the end they said to send the TC in and they would replace it. Right now had to send my proof of purchase before they can proceed with shipping instructions.

The person I "chatted" with and the one I spoke with were very helpful,. but not clued in as to the actual problem (vignetting). Seemed it was new to them. Probably they have to deal with questions about loads of other non-photographic queries. So I didn't bother asking what they thought might be the cause of the problem.
Feb 22, 2019 at 02:50 PM
Douglas L
Online
Details
p.8 #4FE 100-400 issues with and without 1.4 extender
bluloo wrote:
naturephoto1 wrote
bluloo wroteSo, just finishing up with Sony support. They're supposed to be processing an exchange for another 1.4 TC. They say that some TCs have an issue that can cause the vignetting with e-mount lenses - but not all TCs in the same serial number range have this issue.

The tech didn't know the source.

FYI, YMMV etc.
Did Sony support give any suggestion as to how we should proceed with so many of us here on FM reporting this issue?

Should we call them and discuss an exchange? What phone number should we use?

Thanks.

Rich
I googled Sony camera support, chose my product, and selected the chat option.

All he could say to me was that certain serial numbers may be impacted, and that not every unit in that range would display the issue.
I asked if it was related to a part change, or manufacturing issue and he didn’t know. But he guessed a mfg issue, FWIW.


I was told something like that 10 months ago when I called them. The replacement they sent, the one I have now has the same issue.
Feb 22, 2019 at 02:52 PM
naturephoto1
Offline
Details
p.8 #5FE 100-400 issues with and without 1.4 extender
bluloo wrote:
So, just finishing up with Sony support. They're supposed to be processing an exchange for another 1.4 TC. They say that some TCs have an issue that can cause the vignetting with e-mount lenses - but not all TCs in the same serial number range have this issue.

The tech didn't know the source.

FYI, YMMV etc.


shac wrote:
I started with a chat and then moved to a telephone call with Sony. In the end they said to send the TC in and they would replace it. Right now had to send my proof of purchase before they can proceed with shipping instructions.

The person I "chatted" with and the one I spoke with were very helpful,. but not clued in as to the actual problem (vignetting). Seemed it was new to them. Probably they have to deal with questions about loads of other non-photographic queries. So I didn't bother asking what they thought might be the cause of
...Show more →

Unfortuantely, I was not as successful as either of you. I had a chat with Jason from Sony and we went through the situation with the vignetting providing him with the my Fredmiranda.com postings with the results with the teleconverter with the 100-400mm GM lens as well as with my posting with my Leica R 280mm f4 Apo-Telyt, Leica R 1.4X Apo Extender, Novoflex Leica R to NEX adapter and the Sony 1.4X Teleconverter. Jason said I needed a new Teleconverter and provided me with a reference # and the phone number to make things happen.

My teleconverter is under warranty. Well, I called the Sony phone number and provided the reference number. I told them of my issue with the Teleconverter and my 100-400mm GM lens. I indicated also of my testing with the teleconverter and the Leica set-up. The Sony rep did not believe that the Leica results demonstrated anything that the Sony 1.4X teleconverter was a problem. The rep told me that I had to send my Teleconverter into Precison camera to repair the teleconverter. That would take 10 to 15 business? days. I guess that I have to pay the shipping. If Precision indicates that they can not repair the teleconverter, I may be entitled to a replacement. I have no idea what to do if Precision tells me that the teleconverter is in spec and there is no problem or issue.

Right now I am furious with Sony.

Rich

Feb 22, 2019 at 03:44 PM
bluloo
Offline
Details
p.8 #6FE 100-400 issues with and without 1.4 extender
Rich, maybe your serial number isn’t in their currently flagged range?
Feb 22, 2019 at 03:55 PM
naturephoto1
Offline
Details
p.8 #7FE 100-400 issues with and without 1.4 extender
bluloo wrote:
Rich, maybe your serial number isn’t in their currently flagged range?


Fred Miranda wrote:
bluloo wrote
Fred Miranda wroteIf Sony had to make a small adjustment (to fix the heavy vignetting), I think it would be easier to do on the teleconverter instead of the lens.
Still, if (and only if) something was modified on newer teleconverters (higher serial numbers) and they perform better vignetting-wise, Sony should have done a recall and offer replacements.

From my experience examining RAW files from 4 members, newer teleconverters may perform like John's and all of us with older serial numbers will see heavier vignetting.
What would you consider older?
John's is 18154xx
Mine is 18039xx

Mine has much bigger vignetting so I call it "old". He has a "new" version. I don't know the exact range which makes it hard to know when "new" started. Perhaps Sony knows.



naturephoto1 wrote:
bluloo wrote
Fred Miranda wrote
bluloo wrote
Fred Miranda wroteIf Sony had to make a small adjustment (to fix the heavy vignetting), I think it would be easier to do on the teleconverter instead of the lens.
Still, if (and only if) something was modified on newer teleconverters (higher serial numbers) and they perform better vignetting-wise, Sony should have done a recall and offer replacements.

From my experience examining RAW files from 4 members, newer teleconverters may perform like John's and all of us with older serial numbers will see heavier vignetting.
What would you consider older?
John's is 18154xx
Mine is 18039xx

Mine has much bigger vignetting so I call it "old". He has a "new" version. I don't know the exact range which makes it hard to know when "new" started. Perhaps Sony knows.
Mine is 18126xx, so in between.
Mine is 18042xx

Rich



Fred Miranda wrote:
naturephoto1 wrote
bluloo wrote
Fred Miranda wrote
bluloo wrote
Fred Miranda wroteIf Sony had to make a small adjustment (to fix the heavy vignetting), I think it would be easier to do on the teleconverter instead of the lens.
Still, if (and only if) something was modified on newer teleconverters (higher serial numbers) and they perform better vignetting-wise, Sony should have done a recall and offer replacements.

From my experience examining RAW files from 4 members, newer teleconverters may perform like John's and all of us with older serial numbers will see heavier vignetting.
What would you consider older?
John's is 18154xx
Mine is 18039xx

Mine has much bigger vignetting so I call it "old". He has a "new" version. I don't know the exact range which makes it hard to know when "new" started. Perhaps Sony knows.
Mine is 18126xx, so in between.
Mine is 18042xx

Rich
And performs just like mine.


I think that it is.

Rich



Feb 22, 2019 at 04:00 PM
Fred Miranda
Offline
Admin
Upload & Sell: On
Details
p.8 #8FE 100-400 issues with and without 1.4 extender
naturephoto1 wrote:
bluloo wroteSo, just finishing up with Sony support. They're supposed to be processing an exchange for another 1.4 TC. They say that some TCs have an issue that can cause the vignetting with e-mount lenses - but not all TCs in the same serial number range have this issue.

The tech didn't know the source.

FYI, YMMV etc.
shac wroteI started with a chat and then moved to a telephone call with Sony. In the end they said to send the TC in and they would replace it. Right now had to send my proof of purchase before they can proceed with shipping instructions.

The person I "chatted" with and the one I spoke with were very helpful,. but not clued in as to the actual problem (vignetting). Seemed it was new to them. Probably they have to deal with questions about loads of other non-photographic queries. So I didn't bother asking what they thought might be the cause of the problem.
Unfortuantely, I was not as successful as either of you. I had a chat with Jason from Sony and we went through the situation with the vignetting providing him with the my Fredmiranda.com postings with the results with the teleconverter with the 100-400mm GM lens as well as with my posting with my Leica R 280mm f4 Apo-Telyt, Leica R 1.4X Apo Extender, Novoflex Leica R to NEX adapter and the Sony 1.4X Teleconverter. Jason said I needed a new Teleconverter and provided me with a reference # and the phone number to make things happen.

My teleconverter is under warranty.
...Show more →

So, it seems like there was definitely a FIX to minimize the vignetting. IMO, Sony should have issued a recall for this.
Feb 22, 2019 at 04:07 PM
bluloo
Offline
Details
p.8 #9FE 100-400 issues with and without 1.4 extender
I'm not all that optimistic on getting a "fix" with a new TC, given the varied reports here.

Sony really should do something about this - formally. I wonder if it's not a design flaw of some sort that is revealed via manufacturing variances, so appears random.
Feb 22, 2019 at 04:39 PM
Douglas L
Online
Details
p.8 #10FE 100-400 issues with and without 1.4 extender
Remember when the FE 24-105 was first launched, some copies had the focus shift (?) problem, we compiled a lot of serial numbers on FM to isolate the batches, I believe eventually Sony fixed the batches that were affected.
Feb 22, 2019 at 04:44 PM
jhinkey
Offline
Details
p.8 #11FE 100-400 issues with and without 1.4 extender
Well, I can categorically say it's the TC.

Rented a 100-400GM & 1.4TC from Glazers here in Seattle and did a direct comparison with my newly-bought 100-400GM & 1.4TC. The GM was from Glazers' stock and the 1.4TC was from Amazon.

First image is my TC & my 100-400GM
Second image is Glazers rental TC and my 100-400GM

Images shot in RAW with exact same settings - Pulled into ACR with no adjustments other than "Enable Profile Corrections" turned on . Set to 400mm and the lens focused at infinity placed down on my slide light table.

Pretty obvious.

I have the other two combinations of lens and TC shot, but only the ones with the TC from Glazers shows the heavy vignetting.

Now even with my TC there is some slight vignetting in the corners and there are slight circular stripes to the patter, but it's much less than the rented TC.

Rental TC has SN 18022XX
My new TC has SN 18154XX

So quite a difference in serial numbers.





Brand New TC







Rental TC



Edited on Feb 23, 2019 at 11:52 AM · View previous versions
Feb 23, 2019 at 11:40 AM
naturephoto1
Offline
Details
p.8 #12FE 100-400 issues with and without 1.4 extender
My 1.4X teleconverter is on its way to Precision Camera Repair in CT. Hopefully they will either fix the issue or give authorization for a replacement. I am not going to be happy if Precision says that the teleconverter is under spec and can neither fix the issue nor authorize replacement.

Rich

Edited on Feb 23, 2019 at 11:52 AM · View previous versions
Feb 23, 2019 at 11:48 AM
jhinkey
Offline
Details
p.8 #13FE 100-400 issues with and without 1.4 extender
Also, careful inspection of the two TCs shows that the earlier model TC has a different ring around the edge of the last rear element compared to my newer TC. I suspect this is causing the vignetting.

As to what's causing the faint circular stripes in my TC, I'm not sure yet, but I think it's not the serrations on the rear baffle, but rather something internal.

Below are pics of the corners of the rear of the TCs, you can see a ring below the serrated light baffle in the corner in the rented (and older TC) than in my new TC bought a week ago or so.





Rented, Older SN 1.4TC







Recently Bought, Newer SN 1.4TC

Feb 23, 2019 at 11:50 AM
Fred Miranda
Offline
Admin
Upload & Sell: On
Details
p.8 #14FE 100-400 issues with and without 1.4 extender
jhinkey wrote:
Also, careful inspection of the two TCs shows that the earlier model TC has a different ring around the edge of the last rear element compared to my newer TC. I suspect this is causing the vignetting.

As to what's causing the faint circular stripes in my TC, I'm not sure yet, but I think it's not the serrations on the rear baffle, but rather something internal.

Below are pics of the corners of the rear of the TCs, you can see a ring below the serrated light baffle in the corner in the rented (and older TC) than in my new
...Show more →

Nice investigating!
I've sent an email to Precision Camera (since they were not getting the phone) explaining what's happening to our TCs. So far no response.
Feb 23, 2019 at 12:46 PM
bluloo
Offline
Details
p.8 #15FE 100-400 issues with and without 1.4 extender
Nice John.

My TC performs like the rented version, which also looks like its baffle is closer to the rear element than the newer one, also like mine - but that may be because the “ring” part is different.
Feb 23, 2019 at 01:17 PM
pizdets17
Offline
Details
p.8 #16FE 100-400 issues with and without 1.4 extender
is this the same issue with a 2x or just the 1.4?
Feb 23, 2019 at 01:56 PM
jhinkey
Offline
Details
p.8 #17FE 100-400 issues with and without 1.4 extender
bluloo wrote:
Nice John.

My TC performs like the rented version, which also looks like its baffle is closer to the rear element than the newer one, also like mine - but that may be because the “ring” part is different.


The baffles look identical and they are identically spaced from the rear element. The only difference I can see is the slight ring around the rearmost element in the older version. It could be part of the element mount or it could be an actual extra baffle of some sort.

Looking through the TC from the front to the back along the corners you can also see a difference and can see how it would vignette more. The baffle is really really close to the light path and it doesn't take much to cut off the rays in the corners.

So last week I put some felt in one corner and some gaffers tape to try to minimize the slight ring patter that you get with a newer SN 1.4TC. The felt caused some hard vignetting, while the much thinner gaffers tape didn't affect the image at all.
See below.





Felt strip in the corner of the rear light baffle, 1.4TC







Resulting image with the felt placed in one corner







Black gaffers tape in the same corner - there was no effect (good or bad).

Feb 23, 2019 at 02:15 PM
jhinkey
Offline
Details
p.8 #18FE 100-400 issues with and without 1.4 extender
I still want to remove the rear baffle all together just to make sure it's not causing the circular banding issues that I see with my TC.
Feb 23, 2019 at 02:16 PM
jhinkey
Offline
Details
p.8 #19FE 100-400 issues with and without 1.4 extender
pizdets17 wrote:
is this the same issue with a 2x or just the 1.4?



No idea, I only own the 1.4TC.
Feb 23, 2019 at 02:17 PM
bluloo
Offline
Details
p.8 #20FE 100-400 issues with and without 1.4 extender
jhinkey wrote:
I still want to remove the rear baffle all together just to make sure it's not causing the circular banding issues that I see with my TC.


It's an easy job. Two small screws holding the contacts and four holding the mount. About 15 minutes for the whole job.

Just don't pull the mount and baffle assembly off too quickly because you want the contacts to separate from the mount and not tug on the ribbon cable.

Feb 23, 2019 at 02:25 PM
FM ForumsSony ForumJoin Upload & Sell
  
 

You are not logged inLog inRegister