fredmiranda.com Login
This topic is in the 2018 archive. You can read it and like its posts here. It is read only.

Archive 2018FE 100-400 issues with and without 1.4 extender

  
 
bluloo
Offline
Details
p.16 #1FE 100-400 issues with and without 1.4 extender
I agree with jhinkey and kdrk888. It looks like this is about the best we can expect.

Maybe there are some units that don't display the same vignetting characteristics, and it looks like our newer replacements are improved but still exhibit some, so I'm not sure what Sony might be able to do.

OTOH, it couldn't hurt to call them and ask if for no other reason than to satisfy yourself.
Mar 23, 2019 at 07:43 PM
jhinkey
Offline
Details
p.16 #2FE 100-400 issues with and without 1.4 extender
I haven't had time to remove the rear baffle of the TC to do a final check, but it seems like a custom profile is still needed to remove the last bit of annoying corner vignetting pattern. I say patter because it's not a simple light fall-off - there are stripes due to some internal reflection of some sort.
Mar 24, 2019 at 10:51 AM
jhinkey
Offline
Details
p.16 #3FE 100-400 issues with and without 1.4 extender
So I take it that a replaced optical block/assembly for the 1.4TC did not solve, or fully solve, the issue?
Apr 01, 2019 at 01:39 PM
71sbeetle
Offline
Details
p.16 #4FE 100-400 issues with and without 1.4 extender
Looks like you removed the file from Dropbox. I had a similar issue and after a couple of trips to Sony pro support/precision camera Sony engineers said it was "normal" and nothing could be done about it.

eyal wrote:
Don't want to hijack this thread but hoping those with experience and interest in the 100-400 can look at some blue sky shots for me.

I've been shooting with the 100-400 for almost a year now and found it to be a good lens but had noticed some odd vignetting/bright spots on uniform areas such as a blue sky. I was out this morning shooting the full moon setting and decided to do a quick check of the sensor on the blue sky to make sure it had no dust spots. I ran it from 5.6-40 and, on getting home, found
...Show more →
Apr 02, 2019 at 12:35 AM
71sbeetle
Offline
Details
p.16 #5FE 100-400 issues with and without 1.4 extender
And a good trick to see the vignetting/lens issues (I still believe the issue is cause by the lens itself, the TC only magnifies it) which is also a good trick to see dust spots better when cleaning your sensor, after importing the picture into photoshop just use the Equalize function to see it better, and then you can further "enhance" the results by changing brightness and contrast. Here's an example. Let me know what you think.







Imported RAW into LR, exported as jpg, no changes were made







Imported into photoshop from LR and used Equalize







After using Equalize, I set brightness to -100 and contrast to 50

Apr 02, 2019 at 12:51 AM
FM ForumsSony ForumJoin Upload & Sell
  
 

You are not logged inLog inRegister