p.14 #2FE 100-400 issues with and without 1.4 extender
Received the new 1.4x TC today. SN 1815xxxx (Old one: 1812xxxx), so looks like a very recent batch.
"Meh"
Not exactly "fixed, but in-camera compensation set to auto, with LR profile correction applied/not applied provides the "best" images, IMO, though I can still see some of the circular reflections from what looks like the inside corners of the baffle.
I'll also be taking my baffle out to see what's what. Hopefully later today.
p.14 #3FE 100-400 issues with and without 1.4 extender
Tomorrow, Precision Photo will have been waiting for parts for the repair of my 1.4X TC for 2 weeks. I will give them 3 weeks to obtain the parts for the repair. If they still have not received the parts, I will contact them. At the 1 month date for receipt of the parts and repair, Precision will have run through almost 1/3 of my remaining time for the 1 year warranty period. I am not happy about this at all. Also, if after 3 weeks Precision can not give me an idea as to when they expect to receive the parts and they can have the TC repaired I will be again contact Sony and express my complete displeasure in their insistence of having the TC repaired and the time for such repair.
I will be traveling to Florida for 9 or 10 days around May 8 and I will need the 1.4X TC back in my possession since I do intend to be photographing birds. I am getting quite concerned about the way that Sony and Precision are and will be proceeding on getting my TC completed working properly prior to my departure. I do want to check the TC before my trip.
p.14 #4FE 100-400 issues with and without 1.4 extender
naturephoto1 wrote:
Tomorrow, Precision Photo will have been waiting for parts for the repair of my 1.4X TC for 2 weeks. I will give them 3 weeks to obtain the parts for the repair. If they still have not received the parts, I will contact them. At the 1 month date for receipt of the parts and repair, Precision will have run through almost 1/3 of my remaining time for the 1 year warranty period. I am not happy about this at all. Also, if after 3 weeks Precision can not give me an idea as to when they expect to receive the parts and they can have the TC repaired I will be again contact Sony and express my complete displeasure in their insistence of having the TC repaired and the time for such repair.
I will be traveling to Florida for 9 or 10 days around May 8 and I will need the 1.4X TC back in my possession since I do intend to be photographing birds. I am getting quite concerned about the way that Sony and Precision are and will be proceeding on getting my TC completed working properly prior to my departure. I do want to check the TC before my trip.
Not exactly "fixed, but in-camera compensation set to auto, with LR profile correction applied/not applied provides the "best" images, IMO, though I can still see some of the circular reflections from what looks like the inside corners of the baffle.
I'll also be taking my baffle out to see what's what. Hopefully later today.
Good, I have not had a chance to do this myself. (Remove the rear baffle of the TC).
p.14 #6FE 100-400 issues with and without 1.4 extender
Off topic a bit but it sounds like sony contracted all their camera/lens repairs (under warranty or not) out to Precision Camera? Sony doesnt do the repair in house like canon/nikon? Wow!
naturephoto1 wrote:
Tomorrow, Precision Photo will have been waiting for parts for the repair of my 1.4X TC for 2 weeks. I will give them 3 weeks to obtain the parts for the repair. If they still have not received the parts, I will contact them. At the 1 month date for receipt of the parts and repair, Precision will have run through almost 1/3 of my remaining time for the 1 year warranty period. I am not happy about this at all. Also, if after 3 weeks Precision can not give me an idea as to when they expect to receive the parts and they can have the TC repaired I will be again contact Sony and express my complete displeasure in their insistence of having the TC repaired and the time for such repair.
I will be traveling to Florida for 9 or 10 days around May 8 and I will need the 1.4X TC back in my possession since I do intend to be photographing birds. I am getting quite concerned about the way that Sony and Precision are and will be proceeding on getting my TC completed working properly prior to my departure. I do want to check the TC before my trip.
p.14 #7FE 100-400 issues with and without 1.4 extender
jhinkey wrote:
Good, I have not had a chance to do this myself. (Remove the rear baffle of the TC).
So, I removed the baffle and couldn't mount the adapter to the camera without it.
Also, if anyone feels the need to try the same, don't remove the mount itself from the unit. The baffle is removed by removing the four small screws around the vertical section of the mount (including the one through the contact assembly).
p.14 #8FE 100-400 issues with and without 1.4 extender
bluloo wrote: jhinkey wroteGood, I have not had a chance to do this myself. (Remove the rear baffle of the TC).
So, I removed the baffle and couldn't mount the adapter to the camera without it.
Also, if anyone feels the need to try the same, don't remove the mount itself from the unit. The baffle is removed by removing the four small screws around the vertical section of the mount (including the one through the contact assembly).
Why would not having the TC's rear baffle installed prevent you from mounting the TC to the camera?
Does the contacts and the baffle have to be installed because the contact block mounts to the baffle?
p.14 #9FE 100-400 issues with and without 1.4 extender
jhinkey wrote: bluloo wrotejhinkey wroteGood, I have not had a chance to do this myself. (Remove the rear baffle of the TC).So, I removed the baffle and couldn't mount the adapter to the camera without it.
Also, if anyone feels the need to try the same, don't remove the mount itself from the unit. The baffle is removed by removing the four small screws around the vertical section of the mount (including the one through the contact assembly).
Why would not having the TC's rear baffle installed prevent you from mounting the TC to the camera?
Does the contacts and the baffle have to be installed because the contact block mounts to the baffle?
The contacts attach to the mount with a single screw. That same screw passes through to the baffle, but it tightens up without the baffle installed so I can't say for certain whether the baffle is needed or not.
I didn't want to try to force or jiggle anything into place when it didn't attach normally, so I can't say exactly why, but I also don't have to pry the new TC off my camera with a screwdriver so it feels like a win in that regard.
p.14 #10FE 100-400 issues with and without 1.4 extender
It looks like the Sony 100-400/4.5-5.6 GM isn't entirely teleconverter compatible?
Are we better off using one of the 150-600mm alternatives with adapter while waiting for a native 150-600mm alternative for that extra reach beyond 400mm focal length?
p.14 #11FE 100-400 issues with and without 1.4 extender
bluloo wrote: jhinkey wrotebluloo wrotejhinkey wroteGood, I have not had a chance to do this myself. (Remove the rear baffle of the TC).So, I removed the baffle and couldn't mount the adapter to the camera without it.
Also, if anyone feels the need to try the same, don't remove the mount itself from the unit. The baffle is removed by removing the four small screws around the vertical section of the mount (including the one through the contact assembly).Why would not having the TC's rear baffle installed prevent you from mounting the TC to the camera?
Does the contacts and the baffle have to be installed because the contact block mounts to the baffle?
The contacts attach to the mount with a single screw. That same screw passes through to the baffle, but it tightens up without the baffle installed so I can't say for certain whether the baffle is needed or not.
I didn't want to try to force or jiggle anything into place when it didn't attach normally, so I can't say exactly why, but I also don't have to pry the new TC off my camera with a screwdriver so it feels like a win in that regard.
You're welcome to try and report back.
The only way for the lack of a baffle to affect the mounting is if:
- the contacts became mis-aligned because they use the baffle to stay in alignment
- One of the screws that held it in was sticking out
- The one screw that does stick out was missing, allowing the mount to over-rotate upon locking the lens to the camera.
p.14 #12FE 100-400 issues with and without 1.4 extender
bjornthun wrote:
It looks like the Sony 100-400/4.5-5.6 GM isn't entirely teleconverter compatible?
Are we better off using one of the 150-600mm alternatives with adapter while waiting for a native 150-600mm alternative for that extra reach beyond 400mm focal length?
I wouldn’t say that. As I said before, I turn on the camera’s lens Compensation and correct in Lightroom again, the problem is pretty much gone. Under most circumstances but not always, I could crop away the corners if the subject is not filling most of the frame. I tried the the canon mount sigma sports 150-600 on my a7rIII, the af at 600mm is a no go, I sold the sigma, I know I didn’t have the latest firmware for the sigma mc11 adapter, this might have had something to do with it. I don’t know how the sigma will work on the A6400. I would love the find out.
p.14 #13FE 100-400 issues with and without 1.4 extender
I rented the Sigma Sport 150-600 to use on the A9. MC 11 FW was most up to date. AF speed of the Sigma is no match to the 100-400 GM with 1.4xTC. Neither was the sharpness.
bjornthun wrote:
It looks like the Sony 100-400/4.5-5.6 GM isn't entirely teleconverter compatible?
Are we better off using one of the 150-600mm alternatives with adapter while waiting for a native 150-600mm alternative for that extra reach beyond 400mm focal length?
p.14 #14FE 100-400 issues with and without 1.4 extender
kdrk888 wrote: bjornthun wroteIt looks like the Sony 100-400/4.5-5.6 GM isn't entirely teleconverter compatible?
Are we better off using one of the 150-600mm alternatives with adapter while waiting for a native 150-600mm alternative for that extra reach beyond 400mm focal length?I wouldn’t say that. As I said before, I turn on the camera’s lens Compensation and correct in Lightroom again, the problem is pretty much gone. Under most circumstances but not always, I could crop away the corners if the subject is not filling most of the frame. I tried the the canon mount sigma sports 150-600 on my a7rIII, the af at 600mm is a no go, I sold the sigma, I know I didn’t have the latest firmware for the sigma mc11 adapter, this might have had something to do with it. I don’t know how the sigma will work on the A6400. I would love the find out....Show more →
---------------------------------------------
Thang wrote:
I rented the Sigma Sport 150-600 to use on the A9. MC 11 FW was most up to date. AF speed of the Sigma is no match to the 100-400 GM with 1.4xTC. Neither was the sharpness.
bjornthun wroteIt looks like the Sony 100-400/4.5-5.6 GM isn't entirely teleconverter compatible?
Are we better off using one of the 150-600mm alternatives with adapter while waiting for a native 150-600mm alternative for that extra reach beyond 400mm focal length?
Thanks for the replies. AF speed definitely is important. It's just that to me those corners were noticeable.
p.14 #15FE 100-400 issues with and without 1.4 extender
My Sport was track sharp, but for all the other reasons given, plus the big difference in weight, I sold mine.
Thang wrote:
I rented the Sigma Sport 150-600 to use on the A9. MC 11 FW was most up to date. AF speed of the Sigma is no match to the 100-400 GM with 1.4xTC. Neither was the sharpness.
bjornthun wroteIt looks like the Sony 100-400/4.5-5.6 GM isn't entirely teleconverter compatible?
Are we better off using one of the 150-600mm alternatives with adapter while waiting for a native 150-600mm alternative for that extra reach beyond 400mm focal length?
Not exactly "fixed, but in-camera compensation set to auto, with LR profile correction applied/not applied provides the "best" images, IMO, though I can still see some of the circular reflections from what looks like the inside corners of the baffle.
I'll also be taking my baffle out to see what's what. Hopefully later today.
This is exactly my experience. After returning my under-warranty 1.4 a couple of weeks ago - today I received a brand new replacement. The first one had a SN 1814XXX - the replacement has SN 1815XXX.
The vignetting in images shot at 400/f8 are essentially the same as yours. A little better when shot at f11.
I just spent 1/2 hour on a call to Sony (in Manila) and they are going to get me a 2nd brand-new replacement. I asked if Sony could test it at 400 before they send it - they said they'd ask this to be done, but I'm not holding my breath.
Is the amount of vignetting shown in your images (with lens profile on) the best we are getting or do some folks out there have zero vignetting at f8 and at 400mm?
TIA
David
p.14 #17FE 100-400 issues with and without 1.4 extender
This is the image at 400/f8 with the replacment. Am I being too picky (i.e. is this typical or as I asked earlier - do some members have no vignetting with the TC 1.4 with the 100-400 set to 400 (560)
p.14 #18FE 100-400 issues with and without 1.4 extender
shac wrote:
This is the image at 400/f8 with the replacment. Am I being too picky (i.e. is this typical or as I asked earlier - do some members have no vignetting with the TC 1.4 with the 100-400 set to 400 (560)
I’m guessing most of us will have some vignetting, even if it amounts to those "shaded rows" in the corners. If that's the worst of it, IMO, it's going to be correctable in post 99% of the time.
p.14 #20FE 100-400 issues with and without 1.4 extender
My 1.4X TC is still at Precision awaiting parts for the repair. As of tomorrow it will be 3 weeks and I will give Precision a phone call about when they anticipate receiving the parts and completing the repair. At this point, I do not expect any positive word and anticipate calling Sony after the discussion.
Next week Precicion will have been waiting for parts for 4 weeks/1 month and this will account for 1 month of what had been 3 months of my remaining warranty.
I need the TC back shortly as I will be going to Florida in 7 weeks and will be taking photos of birds. At this point I am concerned that Precision and Sony will let me down and I will have neither the TC back in time to check that it is in good working order nor Sony sending me a good working replacement.