No, I have seen very little on this anywhere, but I'm sure that there are people using them.
The Ed Mika mount is a complete mount conversion, so it shouldn't lose precision compared to the original, unlike a mount adapter.
I figure there are a few benefits to this approach (hypothetically speaking, at this point):
1. The EOS mount can have a chip put on it to report some EXIF info to the camera.
2. I can use the newer EOS teleconverters, which may be a higher level of performance (we'll see)
3. I can also use the Sony teleconverters...
My hypothesis is that the newer EOS TCs are going to be better than the FD ones, but as the lenses have changed (adding IS internally, etc.) the optics have as well, so I suspect that the Mk III ones could feasibly be worse than the MkII ones on these older lenses because they are designed to work with different optical formulas in the most current lenses.
Plus, they are considerably more expensive, and I'm trying to do this on the cheap.
I also figure that using the Canon TCs should be better than the Sony ones because they are actually in the right position for the lens whereas the Sony TCs are considerably farther back. I've seen results from a few people using both TCs with a Canon lens and they seem to indicate that the performance is approximately equal, so there may not be any real performance difference there.
All of this is completely theoretical at this point. I'm waiting on the EdMika mount, and still don't have the 2x EF TC MkII in hand. I do have the two FD TCs waiting.