fredmiranda.com Login
This topic is in the 2017 archive. You can read it and like its posts here. It is read only.

Archive 2017Canon NFD 2.8/300L

  
 
naturephoto1
Offline
Details
p.5 #1Canon NFD 2.8/300L
mjm6 wrote:
Anyone using the FD 500 f4.5 lens on the a7 or similar cameras? I have a need for a super telephoto, and am interested in what I can do with a lens like that.

If you were going to also look at TC's for these old FD lenses, would it make more sense to get the old FD TC's or get the new Sony TC's? Anyone know how the old compare to the new Sony ones performance-wise?

I'm assuming you can even mount the new TC's with a FD-FE adapter, which may not be correct.

---Michael


Hi Michael,

Below are some images taken with my tripod mounted Canon new FD 500mm f4.5L lens and my A7r:

Rich





10 Point Buck, White Tail Deer, full frame, ISO 800, f4.5, 1/125 second.







Doe, White Tail Deer, cropped, ISO 1600, f4.5, 1/100 second.







Doe, White Tail Deer, heavily cropped, ISO 1600, f4.5, 1/100 second.







Doe, White Tail Deer, heavily cropped, ISO 1600, f4.5, 1/100 second.







Doe, White Tail Deer, heavily cropped, ISO 1600, f4.5, 1/100 second.

Mar 03, 2018 at 12:18 PM
dog rocket
Offline
Details
p.5 #2Canon NFD 2.8/300L
Edd, nice collection!

I’d be happy to share the stl files. PM me.

Randy
Mar 04, 2018 at 02:02 AM
roboticspro
Offline
Details
p.5 #3Canon NFD 2.8/300L
Randy,

Thanks for your offer...check your PM's

Edd
Mar 04, 2018 at 07:02 AM
telyt
Offline
Details
p.5 #4Canon NFD 2.8/300L
mjm6 wrote:
Anyone using the FD 500 f4.5 lens on the a7 or similar cameras? I have a need for a super telephoto, and am interested in what I can do with a lens like that.


On a7rII:
http://www.wildlightphoto.com/birds/accipitridae/elanus/wtkite07.jpg


http://www.wildlightphoto.com/birds/troglodytidae/salpinctes/rowren05.jpg


http://www.wildlightphoto.com/mammals/otariidae/zalophus/cslion00.jpg


http://www.wildlightphoto.com/birds/accipitridae/haliaeetus/baeagl08.jpg


http://www.wildlightphoto.com/birds/falconidae/pefalc13.jpg


http://www.wildlightphoto.com/birds/trochilidae/selasphorus/cahumm07.jpg


http://www.wildlightphoto.com/birds/accipitridae/haliaeetus/baeagl06.jpg


The FD 500mm f/4.5 L has some lateral chromatic aberration which can be processed out in C1, resulting in very sharp images. The White-tailed Kite and sea lion above are both extreme crops.

backgrounds can be a little rough in some circumstances:

http://www.wildlightphoto.com/birds/ardeidae/butorides/grhero12.jpg


The 500's highlight separation and color saturation isn't quite as good as the Leica 280/4 APO but overall and for the price I paid it's a pretty good lens. IMHO extension tubes are more important than a TC with this lens.
Mar 04, 2018 at 07:50 AM
makatanav
Offline
Details
p.5 #5Canon NFD 2.8/300L
first test of nFD 2.8/300 L
On monopod, using focus magnification (don't know jet, if can nail focus from hand without focus magnification)


A7 II + nFD 2.8/300 L
Mar 14, 2018 at 08:35 AM
Peire
Offline
Details
p.5 #6Canon NFD 2.8/300L
Lense's performance is truly remarkable.

Gooseflesh on the skin-please have some mercy over this nice russian girl!
Mar 14, 2018 at 09:46 AM
dog rocket
Offline
Details
p.5 #7Canon NFD 2.8/300L
Peire wrote:
Lense's performance is truly remarkable.

Gooseflesh on the skin-please have some mercy over this nice russian girl!


Goosebumps are my favorite. She'd have a hard time convincing me to smooth those out.

Mar 14, 2018 at 01:09 PM
makatanav
Offline
Details
p.5 #8Canon NFD 2.8/300L
not Russian, Latvian
Mar 15, 2018 at 07:10 AM
makatanav
Offline
Details
p.5 #9Canon NFD 2.8/300L

A7 II + nFD 2.8/300 L
Mar 16, 2018 at 02:47 AM
makatanav
Offline
Details
p.5 #10Canon NFD 2.8/300L

A7 II + FD 2x-B + nFD 2.8/300 L (5.6/600 handhold)
Mar 19, 2018 at 05:42 AM
elimoss
Offline
Details
p.5 #11Canon NFD 2.8/300L
I've never used a 2kg lens, especially not on an a7 series body.

Any tips on how not to accidentally warp the mount or chassis when handling such a lens? Seems like that could be an issue because even an adapted Tamron 70-200 f2.8 seems a bit stressful on the mount.

Mar 27, 2018 at 08:12 PM
freaklikeme
Offline
Details
p.5 #12Canon NFD 2.8/300L
elimoss wrote:
I've never used a 2kg lens, especially not on an a7 series body.

Any tips on how not to accidentally warp the mount or chassis when handling such a lens? Seems like that could be an issue because even an adapted Tamron 70-200 f2.8 seems a bit stressful on the mount.



Let the full weight of the lens rest in your hand and always hold it by the lens.
Mar 27, 2018 at 09:03 PM
elimoss
Offline
Details
p.5 #13Canon NFD 2.8/300L
Thanks, maybe I'm just paranoid after reading some of Roger C's and Lloyd Chambers comments on the importance of mount parallelism.
Mar 28, 2018 at 09:03 AM
bluloo
Offline
Details
p.5 #14Canon NFD 2.8/300L
Should have one of these in my hands next Friday. Hopefully, it's a good copy.

Looking forward to nicer weather to take advantage of it.

All of the excellent photos in this thread have had me hunting for a reasonably affordable copy for some time.

Mar 28, 2018 at 09:50 PM
freaklikeme
Offline
Details
p.5 #15Canon NFD 2.8/300L
elimoss wrote:
Thanks, maybe I'm just paranoid after reading some of Roger C's and Lloyd Chambers comments on the importance of mount parallelism.


You could always go the monopod route if you're worried about it. I use one frequently with the Tamron 150-600 G2 because it's f/6.3 by the time it gets really useful, and I find myself shooting slower than optimal for hand holding, but it should ensure as much mount parallelism as the camera/adapter/lens combination will allow.
Mar 28, 2018 at 10:09 PM
MAubrey
Offline
Details
p.5 #16Canon NFD 2.8/300L
elimoss wrote:
Thanks, maybe I'm just paranoid after reading some of Roger C's and Lloyd Chambers comments on the importance of mount parallelism.


Roger would tell you that mount parallelism really only matters if you're shooting flat charts because any tilt of the focal plane is consistent across the entire sensor. Once you're dealing with a 3d subject, then it isn't an issue so long as you're making sure to get your subject on that plane.
Mar 29, 2018 at 10:47 AM
dog rocket
Offline
Details
p.5 #17Canon NFD 2.8/300L
Does it sound reasonable that landscapes at infinity might be the caveat to that?

MAubrey wrote:
elimoss wroteThanks, maybe I'm just paranoid after reading some of Roger C's and Lloyd Chambers comments on the importance of mount parallelism.
Roger would tell you that mount parallelism really only matters if you're shooting flat charts because any tilt of the focal plane is consistent across the entire sensor. Once you're dealing with a 3d subject, then it isn't an issue so long as you're making sure to get your subject on that plane.

Mar 29, 2018 at 02:20 PM
elimoss
Offline
Details
p.5 #18Canon NFD 2.8/300L
Yes, I think landscapes at infinity, particularly on an ultra wide, might be affected by poor mount planarity in a way that can't be compensated for by modifying focus. I'm not 100% on how bad it can be, though.


I'm going to quote Lloyd Chambers here:

"Also, I see no reason to take the unacceptable risk of swinging around a heavy lens on a lens adapter almost certainly to put it off-planarity at least slightly, and sooner or later to nicely warp the lens mount with a modest whack (lever arm torque). Not to mention the huge usability hassle and much higher vibration risk."

Now, I wouldn't take this too literally as it's a bit out of context. Perhaps he is just trying to vent his dislike of adapters when they are not 100% necessary, but it did get me thinking of whether precautions are needed to prevent mount warp when mounting heavy lenses, particularly on an adapter.


Mar 29, 2018 at 02:30 PM
MAubrey
Offline
Details
p.5 #19Canon NFD 2.8/300L
dog rocket wrote:
Does it sound reasonable that landscapes at infinity might be the caveat to that?

MAubrey wrote
elimoss wroteThanks, maybe I'm just paranoid after reading some of Roger C's and Lloyd Chambers comments on the importance of mount parallelism.
Roger would tell you that mount parallelism really only matters if you're shooting flat charts because any tilt of the focal plane is consistent across the entire sensor. Once you're dealing with a 3d subject, then it isn't an issue so long as you're making sure to get your subject on that plane.


It probably depends on the lens. An ultrawide is more likely to have complex field curvature that's going to affect a landscape more the this kind of tilt word. My experience is that once you know what it is, you can control for it relatively easily...just like how you might focus on the midzone or corner in order to balance sharpness across the image.

And if you're focusing between infinity and the hyperfocus distance, you may not need to worry about it at all...
Mar 29, 2018 at 04:07 PM
dog rocket
Offline
Details
p.5 #20Canon NFD 2.8/300L
This is an interesting discussion and broader than the subject of the thread so I won't go on and on, but... it seems with all the 'curves' brought into the equation from the lens elements, that a 'planar' factor brought into the mix by the mount may not be much of a factor, considering...

In other words, the real magic is between the lens elements and the sensor. The mount is just a necessary evil to hold everything in place. Could it be the complexity of the lens array is less affected by small deviations in the angular positioning of the mount? I don't know... I'm over my head here.

I will say that from a mechanical manufacturing perspective, I was always curious how manufacturers are able to keep the mount parallel to the sensor as well as the planar distances between them when the tolerance stackup is severe. Maybe, in reality, it just doesn't matter that much...

... up to a point.
Mar 29, 2018 at 04:51 PM
FM ForumsSony ForumJoin Upload & Sell
  
 

You are not logged inLog inRegister