Spent an hour testing FW1.02 on my 1dx2 with various lenses and have no corrupt files. 504 raw shots where taken in single shot and burst mode. The camera was switched off and on many times during testing.
After installing the new FW I ran the Sandisk sanitizer programme on my 128GB CFAST card that has had corrupt files before the updated FW was installed. The CFast card was then formatted in camera.
Being as the Cfast card has been sanitised and reformatted it is unlikely the firmware creates a file on the CFast card.
RonLander wrote:
Spent an hour testing FW1.02 on my 1dx2 with various lenses and have no corrupt files. 504 raw shots where taken in single shot and burst mode. The camera was switched off and on many times during testing.
After installing the new FW I ran the Sandisk sanitizer programme on my 128GB CFAST card that has had corrupt files before the updated FW was installed. The CFast card was then formatted in camera.
Being as the Cfast card has been sanitised and reformatted it is unlikely the firmware creates a file on the CFast card.
how did you get sanitize to read the card? My sanitize won't read any sandisk card and i'm 5 days from leaving for Africa, I may have to leave the cfast cards home..
we are discussing Sandisk NOT lexar, Sanitize will NOT read any of my 6 Sandisk cards. I never mentioned Lexar
HKFEVER wrote: KKFung wroteFern Trujillo wroteKKFung wroteI got my 1Dx2 yesterday and have a flyer as below. Mine already have firmware ver. 1.0.2, seem I can use Sandisk but I don't have either Lexar or Sandisk CFast on hand now
There is one problem however, I downloaded Sanitize from Sandisk as per the instruction but the program does not recognize that there is a Sandisk card inserted in the computer.
A call to Sandisk was less than fruitful they at least the ones I spoke with had no idea what's going on or how to get their program to recognize their cards.
Frustrating.
I have to honest however all cards eventually go bad but my rate so far has been
Sandisk 3 Lexar 0Thanks for share Fern, I think I should borrow some Sandisk cards and reader from my friend to have a test.The Sanitize only works with Sandisk reader not Lexar.
Fern Trujillo wrote: RonLander wroteSpent an hour testing FW1.02 on my 1dx2 with various lenses and have no corrupt files. 504 raw shots where taken in single shot and burst mode. The camera was switched off and on many times during testing.
After installing the new FW I ran the Sandisk sanitizer programme on my 128GB CFAST card that has had corrupt files before the updated FW was installed. The CFast card was then formatted in camera.
Being as the Cfast card has been sanitised and reformatted it is unlikely the firmware creates a file on the CFast card. how did you get sanitize to read the card? My sanitize won't read any sandisk card and i'm 5 days from leaving for Africa, I may have to leave the cfast cards home..
Why don't you just update to the new FW? Likely that will be sufficient without Sanitize. Canon FW release notes say that the FW doesn't require sanitize to eliminate the corrupted files. It does say that Sandisk recommends use of sanitize on a somewhat regular basis to keep the card performing to maximum speed.
Sanitize is for Sandisk CFast reader and Sandisk CFast card only.
Sanitize won't work with other brand CF reader, CFast reader nor CF card.
Fern Trujillo wrote:
we are discussing Sandisk NOT lexar, Sanitize will NOT read any of my 6 Sandisk cards. I never mentioned Lexar
HKFEVER wroteKKFung wroteFern Trujillo wroteKKFung wroteI got my 1Dx2 yesterday and have a flyer as below. Mine already have firmware ver. 1.0.2, seem I can use Sandisk but I don't have either Lexar or Sandisk CFast on hand now
There is one problem however, I downloaded Sanitize from Sandisk as per the instruction but the program does not recognize that there is a Sandisk card inserted in the computer.
A call to Sandisk was less than fruitful they at least the ones I spoke with had no idea what's going on or how to get their program to recognize their cards.
Frustrating.
I have to honest however all cards eventually go bad but my rate so far has been
Sandisk 3 Lexar 0Thanks for share Fern, I think I should borrow some Sandisk cards and reader from my friend to have a test.The Sanitize only works with Sandisk reader not Lexar.
Fern Trujillo wrote:
we are discussing Sandisk NOT lexar, Sanitize will NOT read any of my 6 Sandisk cards. I never mentioned Lexar
HKFEVER wroteKKFung wroteFern Trujillo wroteKKFung wroteI got my 1Dx2 yesterday and have a flyer as below. Mine already have firmware ver. 1.0.2, seem I can use Sandisk but I don't have either Lexar or Sandisk CFast on hand now
There is one problem however, I downloaded Sanitize from Sandisk as per the instruction but the program does not recognize that there is a Sandisk card inserted in the computer.
A call to Sandisk was less than fruitful they at least the ones I spoke with had no idea what's going on or how to get their program to recognize their cards.
Frustrating.
I have to honest however all cards eventually go bad but my rate so far has been
Sandisk 3 Lexar 0Thanks for share Fern, I think I should borrow some Sandisk cards and reader from my friend to have a test.The Sanitize only works with Sandisk reader not Lexar.
sorry I wasnt clear.....has anyone tried the new FW with Lexar cards to make sure that they still work?
Herb wrote: Fern Trujillo wrotewe are discussing Sandisk NOT lexar, Sanitize will NOT read any of my 6 Sandisk cards. I never mentioned Lexar
HKFEVER wroteKKFung wroteFern Trujillo wroteKKFung wroteI got my 1Dx2 yesterday and have a flyer as below. Mine already have firmware ver. 1.0.2, seem I can use Sandisk but I don't have either Lexar or Sandisk CFast on hand now
There is one problem however, I downloaded Sanitize from Sandisk as per the instruction but the program does not recognize that there is a Sandisk card inserted in the computer.
A call to Sandisk was less than fruitful they at least the ones I spoke with had no idea what's going on or how to get their program to recognize their cards.
Frustrating.
I have to honest however all cards eventually go bad but my rate so far has been
Sandisk 3 Lexar 0Thanks for share Fern, I think I should borrow some Sandisk cards and reader from my friend to have a test.The Sanitize only works with Sandisk reader not Lexar.sorry I wasnt clear.....has anyone tried the new FW with Lexar cards to make sure that they still work?
Yes, everything works as usual with Lexar CF and CFast cards. I didn't do much shooting today to see if I will get any corrupted files though...
On the side note, I was surpised how long it took for this firmware to install. The longest I've ever done for sure
I have the 64gig cfast that came with my camera. I cant find where to locate the product # to see if I have an effected card. So far I have had no corrupt images.
I only see a 12 digit numerical number only on the card, nothing like the numbers listed.
ifxbonz wrote:
I have the 64gig cfast that came with my camera. I cant find where to locate the product # to see if I have an effected card. So far I have had no corrupt images.
I only see a 12 digit numerical number only on the card, nothing like the numbers listed.
Andy
The product # in on the back of the paper box, on top of the barcode.
Yes, thankfully no issues with 2 different Lear cards I had purchased prior to the cameras arrival.
I have decided that the best and safest route for my upcoming overseas trip is to just take the regular 1066 Lear cards I already own.
Although I'm a bit worried about the sensor dust issue now being reported! If it's not one thing it's another.
Herb wrote: Fern Trujillo wrotewe are discussing Sandisk NOT lexar, Sanitize will NOT read any of my 6 Sandisk cards. I never mentioned Lexar
HKFEVER wroteKKFung wroteFern Trujillo wroteKKFung wroteI got my 1Dx2 yesterday and have a flyer as below. Mine already have firmware ver. 1.0.2, seem I can use Sandisk but I don't have either Lexar or Sandisk CFast on hand now
There is one problem however, I downloaded Sanitize from Sandisk as per the instruction but the program does not recognize that there is a Sandisk card inserted in the computer.
A call to Sandisk was less than fruitful they at least the ones I spoke with had no idea what's going on or how to get their program to recognize their cards.
Frustrating.
I have to honest however all cards eventually go bad but my rate so far has been
Sandisk 3 Lexar 0Thanks for share Fern, I think I should borrow some Sandisk cards and reader from my friend to have a test.The Sanitize only works with Sandisk reader not Lexar.sorry I wasnt clear.....has anyone tried the new FW with Lexar cards to make sure that they still work?
I'm on 10.11 and it doesn't recognize any Sandisk Cfast whatsoever.
rscheffler wrote:
What OS did you install the Sandisk software on? For Apple OSX systems, Sandisk states the requirement for 10.10 or 10.11. I'm still on 10.9, not having found a compelling reason to upgrade to the newer versions...
The camera came with the new firmware already uploaded AND the instruction sheet to still download and use sanitize Sandisk cards.
arbitrage wrote: Fern Trujillo wroteRonLander wroteSpent an hour testing FW1.02 on my 1dx2 with various lenses and have no corrupt files. 504 raw shots where taken in single shot and burst mode. The camera was switched off and on many times during testing.
After installing the new FW I ran the Sandisk sanitizer programme on my 128GB CFAST card that has had corrupt files before the updated FW was installed. The CFast card was then formatted in camera.
Being as the Cfast card has been sanitised and reformatted it is unlikely the firmware creates a file on the CFast card. how did you get sanitize to read the card? My sanitize won't read any sandisk card and i'm 5 days from leaving for Africa, I may have to leave the cfast cards home..Why don't you just update to the new FW? Likely that will be sufficient without Sanitize. Canon FW release notes say that the FW doesn't require sanitize to eliminate the corrupted files. It does say that Sandisk recommends use of sanitize on a somewhat regular basis to keep the card performing to maximum speed.
Again I reiterate sanitize will NOT read or recognize the Sandisk brand cards it was written for.
HKFEVER wrote:
Sanitize is for Sandisk CFast reader and Sandisk CFast card only.
Sanitize won't work with other brand CF reader, CFast reader nor CF card.
Fern Trujillo wrotewe are discussing Sandisk NOT lexar, Sanitize will NOT read any of my 6 Sandisk cards. I never mentioned Lexar
HKFEVER wroteKKFung wroteFern Trujillo wroteKKFung wroteI got my 1Dx2 yesterday and have a flyer as below. Mine already have firmware ver. 1.0.2, seem I can use Sandisk but I don't have either Lexar or Sandisk CFast on hand now
There is one problem however, I downloaded Sanitize from Sandisk as per the instruction but the program does not recognize that there is a Sandisk card inserted in the computer.
A call to Sandisk was less than fruitful they at least the ones I spoke with had no idea what's going on or how to get their program to recognize their cards.
Frustrating.
I have to honest however all cards eventually go bad but my rate so far has been
Sandisk 3 Lexar 0Thanks for share Fern, I think I should borrow some Sandisk cards and reader from my friend to have a test.The Sanitize only works with Sandisk reader not Lexar.
Although my camera has not experienced the issue of the corruption with a Sandisk cfast card, I see a
fix is out. Firmware 1.02 for the corrupted card issue is on Canon USA site.
Fern Trujillo wrote:
The camera came with the new firmware already uploaded AND the instruction sheet to still download and use sanitize Sandisk cards.
arbitrage wroteFern Trujillo wroteRonLander wroteSpent an hour testing FW1.02 on my 1dx2 with various lenses and have no corrupt files. 504 raw shots where taken in single shot and burst mode. The camera was switched off and on many times during testing.
After installing the new FW I ran the Sandisk sanitizer programme on my 128GB CFAST card that has had corrupt files before the updated FW was installed. The CFast card was then formatted in camera.
Being as the Cfast card has been sanitised and reformatted it is unlikely the firmware creates a file on the CFast card. how did you get sanitize to read the card? My sanitize won't read any sandisk card and i'm 5 days from leaving for Africa, I may have to leave the cfast cards home..Why don't you just update to the new FW? Likely that will be sufficient without Sanitize. Canon FW release notes say that the FW doesn't require sanitize to eliminate the corrupted files. It does say that Sandisk recommends use of sanitize on a somewhat regular basis to keep the card performing to maximum speed.
Hopefully you will find a way to get Sanitize to work in the future but it will have no bearing on getting corrupted files on your trip if you already have 1.02. From the Canon FW release notes:
About the "Refresh Tool" of SanDisk cards:
Q1: Whenever the camera is used to format a SanDisk CFast card, is it mandatory to use the refresh tool? If the refresh tool is not used, will the bottom part of still images become corrupted?
A1: The refresh tool is not related to image corruption that appears at the bottom part of still images. We are informing users about this tool as SanDisk recommends regular use of the refresh tool when using SanDisk CFast cards. For details about the use of the refresh tool, please inquire with SanDisk.
Q2: How often does the refresh tool have to be used?
A2: For details about use frequency, and the use of the refresh tool, please inquire with SanDisk.
Q3: What will happen to camera operations if I continue using a SanDisk CFast card without using the refresh tool?
A3: The speed for continuous data writing may decrease. If the data writing speed seems to have decreased during high-speed continuous shooting, please try to use the refresh tool to alleviate the problem. For any other technical questions concerning CFast cards, please inquire with SanDisk.
Notice it says that it "is not related to image corruption" and that if you don't use it the only issue will be "writing speed may decrease". It will still write way faster than your 1066x CF cards, especially as your CFast cards are likely brand new. If you are still worried then wouldn't you shoot backup using both CFast and CF anyways? I see no reason to only shoot to the CF. If the CF card goes bad during the trip (has happened to me twice in the 1DX) then you have no backup.