martintyler wrote:
A quick run down of tests I just did:
Body cap on test at ISO 100, exposure pushed +5 in LR
- 30s
- 30s on continuous shooting (invoking 12 bit mode)
- 30s on bulb
I did all the above on firmware 1.10, then 2.00 compressed, then 2.00 uncompressed
Hot pixels, I can't see a difference. Less general red noise on the uncompressed versions.
Note that there is a fine line here.. I first did the 2.00 tests immediately after upgrading, and the showed hotter pixels and slightly more noise, then re-did the test an hour later after the camera had been doing nothing then got the results described.
I did the same at ISO 3200 (pushed +3) and can't see a difference at all....Show more →
Thank you for taking the time to do this, greatly appreciated. I guess this could mean that it is more of a hardware issue.
I hereby release all copyright claims to these images
I'm afraid I didn't manage this test - only realised when I was about to do the upgrade that I didn't have a timer remote with which to do a 4-minute exposure. I can still do the "after" images when I do get a remote.
Nice to meet you :-)
Do you still hava an A7RII with firmware version 1.00 or 1.10?
