fredmiranda.com Login
This topic is in the 2013 archive. You can read it and like its posts here. It is read only.

Archive 2013Phigment LM-NEX: Electronic Leica -> NEX Adapter

  
 
phigment
Offline
Details
p.4 #1Phigment LM-NEX: Electronic Leica -> NEX Adapter
Jonas B wrote:
dpap1978 wroteOk, I tried it with the following lenses and it works great:
ZM Biogon 35 /2.8
ZM Planar 50 /2
VC 28/3.5
Mil Nikkor with Amadeo adapter

sadly, the VC 35/1.2 v1 does not mount (there are two metal fins on the lens that do not fit through the adapter opening)
How old is your v1 of the CV35/1.2? Does it mount on a Leica camera? I recall Steven Gandy offering a free adjustment of the first batch of the CV35/1.2 as it didn't mount on Leica cameras. My question is if all CV35/1.2 fail to mount to to the adapter.


I haven't been able to try it out myself, but this is likely due to my adapter's opening being too narrow for this lens (and the Summicron-M 35mm f/2 (IV)).

I don't have the lens but based on some user feedback with pictures of the Summicron-M 35mm f/2 (IV) it is definitely too small to fit in the adapter (as is).

There does exist the possibility of modifying the adapter to make it fit. This would involve shaving back part of the housing and a small amount of internal circuit board. I haven't been able to verify how much is required, but I doubt anyone would want to do that sort of modification.
Oct 22, 2013 at 11:01 AM
Jonas B
Offline
Details
p.4 #2Phigment LM-NEX: Electronic Leica -> NEX Adapter
Thank you for getting back on the topic.

If a modification of the adapter is all it takes (assuming it the electronics still will work) I could consider doing it. I'm right now using an RX1 and 35mm is the right focal length. I used to own a CV35/1.2 and used it a lot with my Nex 5 as a normal lens. That experience make me want to try it on a FF camera with an EVF.

The Summilux-M 35/1.4 is an interesting lens. When compared to the CV35/1.2 it has it strong sides but the focus shift could be annoying. The wavy MTF ruined images most other, and much cheaper, lenses had no problems with. When it worked it rendered beautiful images with less flare and CA than the CV35/1.2 but in the long run the CV35/1.2 is very good and uncomplicated.

In my experience (on a crop camera) the Zeiss 35/2 Biogon was no match for the CV35/1.2. Yes, I can indeed imagine modify the adapter.

Do you think the electronic circuit would be damaged by the modification?
Oct 22, 2013 at 11:39 AM
Jonas B
Offline
Details
p.4 #3Phigment LM-NEX: Electronic Leica -> NEX Adapter
(phigment came back to me by sending a PM. Very kind. We discussed some details. It may, or may not, be possible to make the 35/1.2 and adapter work together by modifying the adapter. To find out somebody in the US having the lens needs to work with phigment to find out. I hope somebody does. And thanks again phigment!)
Oct 22, 2013 at 12:51 PM
phigment
Offline
Details
p.4 #4Phigment LM-NEX: Electronic Leica -> NEX Adapter
phigment wrote:
Just a little teaser of something I've been working on.

I recently realized that my NEX7 only have firmware 1.00 installed. After updating to 1.03 I could see (as mentioned by many other people) that colour cast is handled differently.

I looked in to it a bit and found that there are indeed controls for adjusting colour cast. I haven't figured them out yet, but here is a (really bad) sample of a random adjustment of these parameters with my CV21 @f/4

Both of these were taken with my adapter, but just using different colour adjustment parameters (can you spot the difference)?:

http://www.phigmenttech.ca/lmnex/img/DSC06364_small.jpg
http://www.phigmenttech.ca/lmnex/img/DSC06365_small.jpg

After doing more testing on my NEX7 I was unable to find controls for specifying colour cast parameters. The best I can do is toggle whether the magenta cast correction is enabled.

It seems that firmware version 1.0 had no colour correction.

Version 1.03 will by default apply a green cast in the corners to clear up the magenta (if you have a smart adapter that doesn't specify correction parameters). If you have a purely mechanical adapter you will still see the magenta.

My guess is that the parameter that I am adjusting to toggle the correction on/off also specify the actual correction parameters, but the NEX7 can't do anything better than on/off. My hope is that the A7 series will be able to do more with the values that I'm specifying.

So, to sum things up: The current firmware version of my adapter will cause the green colour cast in the corners (this will get rid of much of the magenta in some wides). I will make a new firmware version to enable toggling of this correction on a frame by frame basis.

For reference, these findings explain why the Metabones smart adapters have a green cast as documented here:
http://verybiglobo.blogspot.cz/2013/01/sony-nex-7-firmware-101-metabones.html

Edited on Oct 25, 2013 at 09:57 AM · View previous versions
Oct 25, 2013 at 08:00 AM
phigment
Offline
Details
p.4 #5Phigment LM-NEX: Electronic Leica -> NEX Adapter
Also, thanks to Rich (naturephoto1) for confirming that the adapter will work on the A7R

https://www.fredmiranda.com/forum/topic/1247673/37#11887760
Oct 25, 2013 at 09:24 AM
k-h.a.w
Offline
Details
p.4 #6Phigment LM-NEX: Electronic Leica -> NEX Adapter
Bump.
Nov 02, 2013 at 04:07 PM
naturephoto1
Offline
Details
p.4 #7Phigment LM-NEX: Electronic Leica -> NEX Adapter
Paul,

How are you doing for getting more adapters made and back in stock. As you know, things are heating up for the A7 and A7r cameras.

There has been much discussion not only about WA M mount RF lenses but also M mount adapters. I want to recommend your Leica M to NEX adapter, but they are still out of stock.

Rich
Nov 17, 2013 at 08:11 AM
phigment
Offline
Details
p.4 #8Phigment LM-NEX: Electronic Leica -> NEX Adapter
Hi Rich,

I am waiting on the ID sensor parts. It uses some uncommon discrete components and the manufacturer had to do a special run for me. They are finally shipped out to my PBB manufacturer and now I'm waiting on assembly. (I.e. I have been waiting on 3 steps in the manufacturing chain).

It should be about mid December before I can mark them as available on my site again. Sigh...


Nov 19, 2013 at 09:51 AM
k-h.a.w
Offline
Details
p.4 #9Phigment LM-NEX: Electronic Leica -> NEX Adapter
Thanks Paul. That's great news.
I am ready to buy another one. :-)
Nov 19, 2013 at 11:06 AM
sxgva
Offline
Details
p.4 #10Phigment LM-NEX: Electronic Leica -> NEX Adapter
phigment wrote:
Hi Rich,

I am waiting on the ID sensor parts. It uses some uncommon discrete components and the manufacturer had to do a special run for me. They are finally shipped out to my PBB manufacturer and now I'm waiting on assembly. (I.e. I have been waiting on 3 steps in the manufacturing chain).

It should be about mid December before I can mark them as available on my site again. Sigh...



Do you take pre-orders from FM'ers at a discount?
Nov 20, 2013 at 08:47 AM
s.kueh
Offline
Details
p.4 #11Phigment LM-NEX: Electronic Leica -> NEX Adapter
k-h.a.w wrote:
Thanks Paul. That's great news.
I am ready to buy another one. :-)

Paul,
Can we place a pre-order?
Thanks.
Nov 20, 2013 at 11:45 PM
phigment
Offline
Details
p.4 #12Phigment LM-NEX: Electronic Leica -> NEX Adapter
sxgva wrote:
Do you take pre-orders from FM'ers at a discount?


My first real revelation of the adapter happened here and I did have an initial promotional offer of $180. That's over now though, sorry. Price is back up to $250.


s.kueh wrote:
Paul,
Can we place a pre-order?
Thanks.


I'm actually working on adding that support to my site, but until then I've been manually adding people to a waiting list. I'll put an adapter on hold an notify users when it's ready.
Nov 21, 2013 at 08:50 AM
phigment
Offline
Details
p.4 #13Phigment LM-NEX: Electronic Leica -> NEX Adapter
I finally got my A7R. I haven't had much chance to test it as a camera yet, but I have been busy testing it out with the adapter.

Things are looking good, and as expected I had to make a few tweeks to make it work as a full frame lens.

I've made a new firmware release to address this and have also packed a few extras in with that update.

So, what's next? Well, aside from actually assembling and shipping adapters, here's my list of software TODOs:
-Test and further improve vignetting correction
-Figure out how to control colour cast correction (if possible)
-Give better distance indication during MF assist
-Provide options in the lens config editor to specify if a lens is FF or crop

Any suggestions are always welcome!
Dec 02, 2013 at 10:03 AM
k-h.a.w
Offline
Details
p.4 #14Phigment LM-NEX: Electronic Leica -> NEX Adapter
phigment wrote:
I finally got my A7R. I haven't had much chance to test it as a camera yet, but I have been busy testing it out with the adapter.

Things are looking good, and as expected I had to make a few tweeks to make it work as a full frame lens.

I've made a new firmware release to address this and have also packed a few extras in with that update.

So, what's next? Well, aside from actually assembling and shipping adapters, here's my list of software TODOs:
-Test and further improve vignetting correction
-Figure out how to control colour cast correction (if possible)
-Give better
...Show more →


Hi Paul,

Your adapter gives excellent results with my Leica WATE on the Sony A7R.
Unfortunately it seems to vignette in the extreme corners with the Leitz TE 135/4.
In contrast the Novoflex NEX/LEM adapter doesn't seem to cause the same kind of vignetting.

I posted images here: http://www.getdpi.com/forum/553377-post57.html

With best regards, Karl-Heinz.
Dec 06, 2013 at 08:44 PM
phigment
Offline
Details
p.4 #15Phigment LM-NEX: Electronic Leica -> NEX Adapter
Thanks Karl-Heinz.
Based on this I've run a few tests. While I don't have many m-mount lenses I have been able to confirm that I do see vignetting being introduced by my adapter on longer lenses.

I can see my 50mm lenses work fine. But 100mm does not.
You have also shown me that 90mm still has vignetting.

So it appears that the circuit board starts to interfere with angles on lenses somewhere between 50 and 90mm.
Dec 06, 2013 at 09:24 PM
k-h.a.w
Offline
Details
p.4 #16Phigment LM-NEX: Electronic Leica -> NEX Adapter
phigment wrote:
Thanks Karl-Heinz.
Based on this I've run a few tests. While I don't have many m-mount lenses I have been able to confirm that I do see vignetting being introduced by my adapter on longer lenses.

I can see my 50mm lenses work fine. But 100mm does not.
You have also shown me that 90mm still has vignetting.

So it appears that the circuit board starts to interfere with angles on lenses somewhere between 50 and 90mm.



Thanks Paul. Tomorrow I will check out my 75/2 Summicron.
Dec 06, 2013 at 09:28 PM
phigment
Offline
Details
p.4 #17Phigment LM-NEX: Electronic Leica -> NEX Adapter
I don't have many sample images yet, but if anybody wants to see the extent of vignetting you can look at the compatibility list on my site.

If available, the lens will have a link to sample images.

If anybody has more samples from the Phigment LM-NEX that I can publish, please send them my way and I'll add them.

Thanks!
Jan 24, 2014 at 10:23 AM
xbarcelo
Offline
Details
p.4 #18Phigment LM-NEX: Electronic Leica -> NEX Adapter
I've just seen that the adapter has been discontinued… A little late, because the message was published on 30 January. It's a shame, I was eagerly waiting for a new batch to be produced… Oh, well…

Fuji actually managed to produce a working adapter. Sony should have done the same!
Feb 11, 2014 at 04:05 AM
phigment
Offline
Details
p.4 #19Phigment LM-NEX: Electronic Leica -> NEX Adapter
Just a little update for those who already have this adapter. I've done some more research and found a way to estimate vignetting profiles. I've updated my site to include a profile editor to make things easier.
https://www.phigmenttech.ca/lmnex/

You can now upload a "blank white" sample image to obtain a custom vignetting profile.

Colour cast on the other hand is much more experimental. I was only able to find a way to modify the strength on my A7R and NEX7. I think the amount of cast correction is highly dependent on the camera in use.

Anyways, I've uploaded two sample images to my site to show the capabilities:

Before:
http://www.phigmenttech.ca/lmnex/img/profile_sample1_before.JPG

After:
http://www.phigmenttech.ca/lmnex/img/profile_sample1_after.JPG
Jul 28, 2014 at 07:31 PM
phigment
Offline
Details
p.4 #20Phigment LM-NEX: Electronic Leica -> NEX Adapter
For those interested, I now have version 1.1 of the adapter ready for sale.

Version 1.1 is sligtly different than the original, as the ID sensor no longer detects 6-bit leica codes, but lenses must be registered on the adapter.

A short demo video of the adapter is also now up.
https://www.phigmenttech.ca/lmnex/index.php?page=news&startid=10&numarticles=5
Aug 23, 2014 at 07:12 AM
FM ForumsLeica & Alternative GearJoin Upload & Sell
  
 

You are not logged inLog inRegister