Hi, thanks for the report. It'd be great if you could let me know which camera and lenses you are using so that I can update the compatibility list.
When I implemented the profile support my original intention was for colour shift, but I couldn't find any controls in the communication protocol to change that. It's only the luma that can be controlled.
On the other hand there are controls for distortion (barrel, pincushion and a mix of the two) and CA. I have a basic understanding of the distortion correction and less than little of the CA.
I haven't explored them too much and I don't know how worth while they'd be.
Reverse engineering of these things take a while, so it's really a matter of what's worth the effort.
Cheers!
I look forward to hearing more about your experience with the adapter.
dpap1978 wrote:
sadly, the VC 35/1.2 v1 does not mount (there are two metal fins on the lens that do not fit through the adapter opening)
Thanks for the feedback. I'm sorry to hear it doesn't fit with that lens.
The good news is that you can still return the adapter if this incompatibility is unacceptable.
I don't have this lens so I can't test it myself. By the looks of pictures online the obstruction doesn't appear to be much wider than the adapter opening. Do you have any way of measuring the outter distance between the two fins? Or a way of indicating how much more clearance is needed?
Thanks, I'll update the compatibility chart with the info you supplied.
I just got the Phigmenttech adapter and tried it out with my coded Summilux-M ASPH. 35/1.4 and NEX-7.
It seems to work as advertised. It indeed transfers the focal length to the NEX-7 Exif.
One has to set the f-number both on the Leica lens and in the camera menu to get the actual value recorded in the Exif as well.
One also has to set AF/MF Select to Manual Focus MF in order to get automatic magnification when turning the focus ring of the Leica lens.
By pressing the wheel center in the back of the NEX-7 one can switch between 5.9x and 11.7x magnification.
After focus is achieved, half pressing the shutter button brings back the full view including focus peaking.
Very slick. I like it!
So far I have crashed the camera once, but that was before I had read the manual.
I don't know exactly what I did to cause that (most likely I took the lens with adapter off while the camera was still powered up).
Anyway, taking battery out and back in corrected the problem.
I will need to gain a lot of experience with a variety of coded and uncoded lenses (those can be set with a usb cable attached to a computer), before assessing the robustness and reliability of this adapter.
But so far it looks very promising.
k-h.a.w wrote:
I just got the Phigmenttech adapter and tried it out with my coded Summilux-M ASPH. 35/1.4 and NEX-7.
It seems to work as advertised. It indeed transfers the focal length to the NEX-7 Exif.
One has to set the f-number both on the Leica lens and in the camera menu to get the actual value recorded in the Exif as well.
One also has to set AF/MF Select to Manual Focus MF in order to get automatic magnification when turning the focus ring of the Leica lens.
By pressing the wheel center in the back of the NEX-7 one can switch between 5.9x and 11.7x magnification.
After focus is achieved, half pressing the shutter button brings back the full view including focus peaking.
Very slick. I like it!
So far I have crashed the camera once, but that was before I had read the manual.
I don't know exactly what I did to cause that (most likely I took the lens with adapter off while the camera was still powered up).
Anyway, taking battery out and back in corrected the problem.
I will need to gain a lot of experience with a variety of coded and uncoded lenses (those can be set with a usb cable attached to a computer), before assessing the robustness and reliability of this adapter.
But so far it looks very promising. ...Show more →
Good write up. I'm glad you like the general functionality of the adapter.
I'm sorry to hear about the crash. I'll definitely try to reproduce it though a series of removals and reattachments at unexpected times. If you (or anybody else) can find a reliable way of reproducing it I can likely come up with a quick firmware fix and post it on my site. Keep me posted!
I am going to place an order for the adapter. But, at this point, I am still awaiting the delivery of my first M mount lens, the Minolta CLE MC Rokkor M 40mm f2 lens and I have no Sony NEX cameras. I may also try to get access to a wide angle Leica M lens as well and intend to bring these and some Leica R lenses with an adapter to PhotoPlus at the Javits Center which runs from October 24-26. Hopefully Sony will allow me to mount the lenses onto the new camera (s).
I will have the adapter in anticipation for the new Sony FF E-mount cameras after release.
I presume that I can just mount the M mount lenses onto a Sony NEX camera using the adapter without locking in any particulars about the lens (es). I would do that later once I had my own camera.
I played around some more with my camera, adapter, and Lux 35/1.4 and experienced two more hang ups when trying to take an image. Also, in both cases the image was lost. Before I attached the adapter, my NEX-7 had never given me any trouble before.
Question: Can the adapter interfere with the electronics/power supply of the camera?
This behavior is reminiscent of my M9 when it hung and never finished writing the image to the memory card.
In your testing does your adapter occasionally hang up with your cameras?
k-h.a.w wrote:
I played around some more with my camera, adapter, and Lux 35/1.4 and experienced two more hang ups when trying to take an image. Also, in both cases the image was lost. Before I attached the adapter, my NEX-7 had never given me any trouble before.
Question: Can the adapter interfere with the electronics/power supply of the camera?
This behavior is reminiscent of my M9 when it hung and never finished writing the image to the memory card.
In your testing does your adapter occasionally hang up with your cameras?
Thanks.
Hi,
This is a little concerning. I did actually see a few black images on my NEX during some testing. Since I wasn't doing any real shooting at the time I had assumed it was just the lens being aimed straight down on the table.
Any hangs that I had were timing issues which I had addressed with some earlier firmware versions.
I will give this my utmost priority and will keep you updated.
I am going to place an order for the adapter. But, at this point, I am still awaiting the delivery of my first M mount lens, the Minolta CLE MC Rokkor M 40mm f2 lens and I have no Sony NEX cameras. I may also try to get access to a wide angle Leica M lens as well and intend to bring these and some Leica R lenses with an adapter to PhotoPlus at the Javits Center which runs from October 24-26. Hopefully Sony will allow me to mount the lenses onto the new camera (s).
I will have the adapter in anticipation for the new Sony FF E-mount cameras after release.
I presume that I can just mount the M mount lenses onto a Sony NEX camera using the adapter without locking in any particulars about the lens (es). I would do that later once I had my own camera.
Thanks very much.
Rich...Show more →
Hi Rich,
Are you asking if you have to do anything special with the adapter?
If the lens is 6-bit coded it will automatically use the correct lens. The camera requires that you unmount the adapter if you are changing lenses, otherwise it won't recognize the lens change).
The only time you need to change the configuration is if you have uncoded lenses, or if you want to change the data that's used for a specific coded lens. When an uncoded lens is placed on the adapter it is recommended that you actually change the configuration to disable the ID sensor and manually specify the ID. It may work to leave the sensor enabled with uncoded lenses, but there may be some false readings, especially if there are screw holes or other non-uniformities.
As for full frame compatibility I am confident that I will be able to get it to work with a firmware update. At the moment I am looking into aquiring access to a VG900, but that is proving difficult unless I buy one, and I'd rather not do that for a couple days worth of testing. I plan on buying a FFNEX when it comes out, so I imagine a day or 2 after I get it a firmware update will be available for my adapter (no guarantees at the moment though)
Also, as mentioned by k-h.a.w, you have to put the camera in to manual focus mode if you expect the focus assist mode to be triggered.
I am going to place an order for the adapter. But, at this point, I am still awaiting the delivery of my first M mount lens, the Minolta CLE MC Rokkor M 40mm f2 lens and I have no Sony NEX cameras. I may also try to get access to a wide angle Leica M lens as well and intend to bring these and some Leica R lenses with an adapter to PhotoPlus at the Javits Center which runs from October 24-26. Hopefully Sony will allow me to mount the lenses onto the new camera (s).
I will have the adapter in anticipation for the new Sony FF E-mount cameras after release.
I presume that I can just mount the M mount lenses onto a Sony NEX camera using the adapter without locking in any particulars about the lens (es). I would do that later once I had my own camera.
Thanks very much.
RichHi Rich,
Are you asking if you have to do anything special with the adapter?
If the lens is 6-bit coded it will automatically use the correct lens. The camera requires that you unmount the adapter if you are changing lenses, otherwise it won't recognize the lens change).
The only time you need to change the configuration is if you have uncoded lenses, or if you want to change the data that's used for a specific coded lens. When an uncoded lens is placed on the adapter it is recommended that you actually change the configuration to disable the ID sensor and manually specify the ID. It may work to leave the sensor enabled with uncoded lenses, but there may be some false readings, especially if there are screw holes or other non-uniformities.
As for full frame compatibility I am confident that I will be able to get it to work with a firmware update. At the moment I am looking into aquiring access to a VG900, but that is proving difficult unless I buy one, and I'd rather not do that for a couple days worth of testing. I plan on buying a FFNEX when it comes out, so I imagine a day or 2 after I get it a firmware update will be available for my adapter (no guarantees at the moment though)
Also, as mentioned by k-h.a.w, you have to put the camera in to manual focus mode if you expect the focus assist mode to be triggered. ...Show more →
It would only cost you a couple of hundred bucks to rent a VG-900 for 5 days here: link
k-h.a.w wrote:
I played around some more with my camera, adapter, and Lux 35/1.4 and experienced two more hang ups when trying to take an image.
...
Question: Can the adapter interfere with the electronics/power supply of the camera?
...
Just a quick update to assure you that this is not an electrical issue. I have recreated a hang and can see why it happened. This is quite likely the problem causing your hang as well and it is a software issue. I am working on a fix now.
Any chance that you can install the firmware update on my adapter that I ordered yesterday before shipment?
Most appreciated if you could. I am in no hurry to get the adapter since I have no NEX camera but I will need it in hand to bring with me to PhotoPlus in NYC for October 24.
Sorry, it was already shipped out yesterday. Remember you can check the order status and tracking info from the link I sent in the confirmation email.
I know it's a pain to get something and have to apply a firmware update immediately, but I tried to make the process as simple as possible. You don't even need to install any special software (unless you have an old computer operating system which doesn't support USB keys... e.g. pre window XP).
It's really nothing to be afraid of, I've done it thousands of times without problem.
Also, you can use the adapter with the original firmware, but you may experience the problem listed above and have to pull the battery from the camera.
Sorry, it was already shipped out yesterday. Remember you can check the order status and tracking info from the link I sent in the confirmation email.
I know it's a pain to get something and have to apply a firmware update immediately, but I tried to make the process as simple as possible. You don't even need to install any special software (unless you have an old computer operating system which doesn't support USB keys... e.g. pre window XP).
It's really nothing to be afraid of, I've done it thousands of times without problem.
Also, you can use the adapter with the original firmware, but you may experience the problem listed above and have to pull the battery from the camera.
Not a problem. I presume that the adapter includes a USB cable to make the firmware updates. I just hope that I have no problem with the update since I have no camera at this point to confirm that everything is OK.
Once the firmware update is done you can check the STATUS.TXT file on the adapters file system. This will indicate which version of firmware is installed.
So, I updated to firmware version 3 under Linux and shot a couple hundred images with the NEX-7 and Lux 35/1.4.
Everything worked fine so far.
When trying to copy the firmware under Mac OS X to the adapter I got the message: "The item “FIRMWARE.FW” can’t be copied because there isn’t enough free space." With Linux there was no such problem.