k-h.a.w wrote:
So, I updated to firmware version 3 under Linux and shot a couple hundred images with the NEX-7 and Lux 35/1.4.
Everything worked fine so far.
When trying to copy the firmware under Mac OS X to the adapter I got the message: "The item “FIRMWARE.FW” can’t be copied because there isn’t enough free space." With Linux there was no such problem.
Check this link over at the L camera forum regarding a helicoid macro/focusing unit that can be used with your M lenses on NEX and other adapters for other mirrorless cameras to allow the lenses to focus much closer than on a Leica M camera.
k-h.a.w wrote:
So, I updated to firmware version 3 under Linux and shot a couple hundred images with the NEX-7 and Lux 35/1.4.
Everything worked fine so far.
When trying to copy the firmware under Mac OS X to the adapter I got the message: "The item “FIRMWARE.FW” can’t be copied because there isn’t enough free space." With Linux there was no such problem.
Hi Karl-Heinz,
Thanks for the feedback.
This appears to be due to the fact that OSX writes hidden files when a drive is mounted. This poses a problem as the adapter drive has barely enough space to fit the firmware files.
I have some ideas on how to work around this problem, but I'd like to try it out myself before offering up a solution. I'll try to acquire access to a Mac in the next day or so and test out my theories.
naturephoto1 wrote: k-h.a.w wroteSo, I updated to firmware version 3 under Linux and shot a couple hundred images with the NEX-7 and Lux 35/1.4.
Everything worked fine so far.
When trying to copy the firmware under Mac OS X to the adapter I got the message: "The item “FIRMWARE.FW” can’t be copied because there isn’t enough free space." With Linux there was no such problem.Check this link over at the L camera forum regarding a helicoid macro/focusing unit that can be used with your M lenses on NEX and other adapters for other mirrorless cameras to allow the lenses to focus much closer than on a Leica M camera.
It's kind of a shame that they started using that larger lens release tab, as it looks like it may get in the way of one's fingers on the grip. V.1 and V.2 had a much smaller release button.
douglasf13 wrote: naturephoto1 wrotek-h.a.w wroteSo, I updated to firmware version 3 under Linux and shot a couple hundred images with the NEX-7 and Lux 35/1.4.
Everything worked fine so far.
When trying to copy the firmware under Mac OS X to the adapter I got the message: "The item “FIRMWARE.FW” can’t be copied because there isn’t enough free space." With Linux there was no such problem.Check this link over at the L camera forum regarding a helicoid macro/focusing unit that can be used with your M lenses on NEX and other adapters for other mirrorless cameras to allow the lenses to focus much closer than on a Leica M camera.
RichIt's kind of a shame that they started using that larger lens release tab, as it looks like it may get in the way of one's fingers on the grip. V.1 and V.2 had a much smaller release button.
Douglas,
The release tab is similar to those used on the Leica R cameras and Leica R extension tubes.
phigment wrote:
Hi Karl-Heinz,
Thanks for the feedback.
This appears to be due to the fact that OSX writes hidden files when a drive is mounted. This poses a problem as the adapter drive has barely enough space to fit the firmware files.
I have some ideas on how to work around this problem, but I'd like to try it out myself before offering up a solution. I'll try to acquire access to a Mac in the next day or so and test out my theories.
Thanks!
It can be solved if you use the terminal (command line).
I don't have the adapter, but let's say it appears in the finder as PHIGMENTLX
1: move the firmware into your home folder
2: open Terminal and type the following commands (be careful with the RM one!)
3: cd /VOLUMES/PHIGMENTLX
4: rm -rf ._*
(this gets rid of the trash files)
5: cp ~/FIRMWARE.FW /VOLUMES/PHIGMENTLX
6: exit
Then, without browsing to the folder, right click on the volume and click eject. The trash files only appear when browsing the folder with the Finder (graphically).
DamonJoyce wrote: phigment wroteHi Karl-Heinz,
Thanks for the feedback.
This appears to be due to the fact that OSX writes hidden files when a drive is mounted. This poses a problem as the adapter drive has barely enough space to fit the firmware files.
I have some ideas on how to work around this problem, but I'd like to try it out myself before offering up a solution. I'll try to acquire access to a Mac in the next day or so and test out my theories.
Thanks!It can be solved if you use the terminal (command line).
I don't have the adapter, but let's say it appears in the finder as PHIGMENTLX
1: move the firmware into your home folder
2: open Terminal and type the following commands (be careful with the RM one!)
3: cd /VOLUMES/PHIGMENTLX
4: rm -rf ._*
(this gets rid of the trash files)
5: cp ~/FIRMWARE.FW /VOLUMES/PHIGMENTLX
6: exit
Then, without browsing to the folder, right click on the volume and click eject. The trash files only appear when browsing the folder with the Finder (graphically).
Excellent advice! I'm borrowing a friend's Mac tonight and will verify whether this works.
Assuming it works I'll update the instructions on my site.
This is very interesting to me and I will almost certainly purchase one if the NEX FF proves to handle M lenses well.
I agree that a short 3 minute you-tube introduction like the one made for the Contax-G AF adapter as well as an ebay presence would dramatically increase your audience reach if that was an important goal.
As a software developer I'm intensely curious about the comms protocols used between the lens and camera. Without giving anything away that might compromise your competitive advantage, I would like to ask whether you reverse engineered this yourself or else obtained access to the E-mount spec from Sony (open but requires statement of intention etc)? Any tips on where to start if I wanted to try and hack this stuff myself?
Hi Julian,
Thanks for the tip. I do plan on making an intro video as well as a series of instructional videos for the less than obvious configuration options.
As for the development, I did it all myself. Sony will not give specs to individuals. Their application process requires you to be a "legal entity" (i.e. corporation). I had to reverse engineer the pinout, communication protocol and physical specifications.
My adapter arrived today. Thank you. It is heavier than I anticipated and well made. I was able to update the firmware, but I didn't find the file that you mentioned in the instructions. I just copied the file (PC) to the drive itself. After disconnecting the adapter from the computer and then reattaching it as you indicated in the instructions the unit indicated that FW version 3 was loaded. So, the files must have found their way to the proper location. I also checked that my Minolta CLE MC Rokkor-M 40mm f2 lens loaded well onto the adapter and it did. I need a camera for the set-up. But, I will as mentioned providing Sony allows me to load the adapter and at least my M and also Leica R lenses onto the FF NEX I will at PhotoPlus in NYC probably on October 24.
My adapter arrived today. Thank you. It is heavier than I anticipated and well made. I was able to update the firmware, but I didn't find the file that you mentioned in the instructions. I just copied the file (PC) to the drive itself. After disconnecting the adapter from the computer and then reattaching it as you indicated in the instructions the unit indicated that FW version 3 was loaded. So, the files must have found their way to the proper location. I also checked that my Minolta CLE MC Rokkor-M 40mm f2 lens loaded well onto the adapter and it did. I need a camera for the set-up. But, I will as mentioned providing Sony allows me to load the adapter and at least my M and also Leica R lenses onto the FF NEX I will at PhotoPlus in NYC probably on October 24.
It looks like you have a successful new product. Your website indicates that the Leica M to NEX adapters are out of stock. So, that means that all 40 of the original adapters are sold or no longer available. I guess that means that you have to go into production for another run and I expect that these will have the CE compliance for worldwide distribution through your webste. Though if as has been mentioned that would not be an issue if sold on ebay.
Now we just need the A7 and A7r FF E-mount cameras so that you will be able to do a firmware update for the usage of the M lenses and adapters with these soon to be released cameras.
k-h.a.w wrote:
Why would a firmware update be necessary?
What is it supposed to accomplish?
I am not against one.
Just trying to understand the rationale.
Thanks.
Karl,
I am not sure if one would be needed, but Paul would at least need some kind of confirmation that the adapters will work properly with the new A7 and A7r cameras soon after release. If there is an issue with the cameras, then I would suspect that a firmware update would be needed. As I recall, Paul had mentioned that he was sure that he could get the adapter to work with the FF E-mount camera soon after release.
I haven't sold all 40, but instead decided to reserve some for any quality control issues. One of the parts I had ordered proved to come in at a higher manufacture failure rate than expected, but the reserve stock gives me enough parts to ensure I can fix anything that may have gotten through with problems.
That being said, I do have an order in progress for more parts but the discrete components seem hard to come by. Looks like it could be a couple of months before I have more ready to ship.
I put a note on my page about CE compliance and international sales. I've decided this isn't something I am going to persue. And just because you sell on ebay doesn't mean you don't need compliance, it just means your are selling them without compliance. The importing/customs agent is within their legal right to forbid import of the product an destroy it.
I am eagerly waiting for the pre-orders to be available for the new cameras. I'm not sure which one I should buy. I'm thinking the A7r
There are 2 reasons a FW update may be required:
1) Since the adapter hasn't been shown to work with the VG900, there is a chance it won't be recognized by the A7/A7r
2) The adapter should report itself as a full frame lens so that the user doesn't have to dig through the menus to enable APCs lens 'uncrop' mode.
There are 2 reasons a FW update may be required:
1) Since the adapter hasn't been shown to work with the VG900, there is a chance it won't be recognized by the A7/A7r
2) The adapter should report itself as a full frame lens so that the user doesn't have to dig through the menus to enable APCs lens 'uncrop' mode.
Just a little teaser of something I've been working on.
I recently realized that my NEX7 only have firmware 1.00 installed. After updating to 1.03 I could see (as mentioned by many other people) that colour cast is handled differently.
I looked in to it a bit and found that there are indeed controls for adjusting colour cast. I haven't figured them out yet, but here is a (really bad) sample of a random adjustment of these parameters with my CV21 @f/4
Both of these were taken with my adapter, but just using different colour adjustment parameters (can you spot the difference)?:
dpap1978 wrote:
Ok, I tried it with the following lenses and it works great:
ZM Biogon 35 /2.8
ZM Planar 50 /2
VC 28/3.5
Mil Nikkor with Amadeo adapter
sadly, the VC 35/1.2 v1 does not mount (there are two metal fins on the lens that do not fit through the adapter opening)
How old is your v1 of the CV35/1.2? Does it mount on a Leica camera? I recall Steven Gandy offering a free adjustment of the first batch of the CV35/1.2 as it didn't mount on Leica cameras. My question is if all CV35/1.2 fail to mount to to the adapter.