Elinchrom D-Lite 4 problem

FM Forums \| Lighting & Studio Techniques \| Join Upload & Sell	Search Used
end

Archive 2008 · Elinchrom D-Lite 4 problem

jcolwell
Offline
Dedicated FM
Upload & Sell: On

p.1 #1 · Elinchrom D-Lite 4 problem

My Elinchrom D-Lite 4 works fine for power settings of 4.5 to 6.0, but not for lower settings from 4.4 to 2.0. The controls seem to work fine at all power levels - the power LCD display flashes for a while after changing settings, and then the ready-to-fire light comes on, but the tube won't fire at power levels below 4.5. My flash meter shows the variation of output power from 4.5 to 6.0 is correct. Any ideas or suggestions would be much appreciated. Thanks, Jim.

Dec 06, 2008 at 04:11 PM

bacilonur
Offline
Upload & Sell: Off

p.1 #2 · Elinchrom D-Lite 4 problem

That's standard. Old flashes always stop working when the new ones come out. A new set of BXRi's should fix that.

Dec 06, 2008 at 06:04 PM

k7xd
Offline
Upload & Sell: Off

p.1 #3 · Elinchrom D-Lite 4 problem

Every time I have had this happen the capacitors smoked
in the not distant future.

Dec 07, 2008 at 12:10 AM

rudiphoto
Offline
Dedicated FM
Upload & Sell: Off

p.1 #4 · Elinchrom D-Lite 4 problem

This is a known problem. It is nothing that you can fix yourself. Your D-Lite has to go back to get fixed.

Dec 07, 2008 at 12:36 AM

jcolwell
Offline
Dedicated FM
Upload & Sell: On

p.1 #5 · Elinchrom D-Lite 4 problem

Sad news. Thanks for the info, Derek & Rudi.

Dec 07, 2008 at 12:46 AM

k7xd
Offline
Upload & Sell: Off

p.1 #6 · Elinchrom D-Lite 4 problem

It does add excitement to a shoot when they go up with that loud bang
and the smoke comes out.

Dec 07, 2008 at 01:12 AM


FM Forums \| Lighting & Studio Techniques \| Join Upload & Sell end