D2X w/ PB-6 Bellows

Moderated by: guardian

Visit the FM Store · Image Upload · Buy & Sell
FM Forum Rules
Nikon SLRs, primes, and zooms lenses reviews

FM Forums | Nikon-mount SLRs | Join Image Upload

end

Archive 2005 · D2X w/ PB-6 Bellows

Ben Horne
Online
Image Upload: On

p.1 #1 · D2X w/ PB-6 Bellows

A customer at our shop is interested in using their D2X with the PB-6 bellows. They were told by Nikon that they can use a dual cable release to control the bellows (AS-7 I think??), however, the D2X does not have a mechanical cable release. Here's the question, is there an adapter you can get that will allow you to transform the D2X's multi-pin remote port into a cable release port? If not, is there any way that you can rig the setup up to work? Thanks in advance!

Ben

Apr 23, 2005 at 12:21 AM

rico
Offline
Image Upload: Off

p.1 #2 · D2X w/ PB-6 Bellows

I use manual-focus lenses on a Contax RTS bellows unit attached to a Canon DSLR body. Seems like the D2X should work flawlessly (and meter) with any non-G lens: you merely accept the loss of an auto-diaphragm.

Apr 23, 2005 at 01:26 AM

Glenn01
Offline
Image Upload: Off

p.1 #3 · D2X w/ PB-6 Bellows

Veeeery interesting! I've been considering the PB6 myself. I've never used a bellows, so this thread is very helpful to me. Thanks.

Glenn

Apr 23, 2005 at 01:10 PM

dreams
Offline
Image Upload: Off

p.1 #4 · D2X w/ PB-6 Bellows

I still have my Spiretone's old Bellows. Sometime, I think about buy PB-4 which has bend and swing bellows.
Yes, they have dual cable release to older Nikon (film). Not for DSLR.

Let you research this one at http://www.nikonians.org/html/resources/nikon_articles/other/close-up_macro/macro_1.html

Apr 23, 2005 at 03:14 PM


FM Forums \| Nikon-mount SLRs \| Join Image Upload end