senna4ever
Offline
Upload & Sell: Off
|
 Re: Fuji GFX 100 II and new lenses - Pre-order / Shipping Thread | |
For all you guys & gals who just got the 100 II, Fuji has just released an emergency firmware update (1.10). It is strongly advised you update before you use the camera.
GFX100 II: Firmware Ver 1.10
Details for Update
1. Black border appears on the left side of the image when recording RAW output with DCI-8K movie (ex. Monitor output with “ATOMOS”, “Blackmagic Design”, etc.).
Note: The above border will be recorded in the movie as well.
2. EVF display may operate abnormally with continuous shooting under the following condition.
(1) [EVF SETTING IN BOOST MODE] ➔ [EVF FRAME RATE PRIORITY (120P)]
3. RAW images taken with GFX100 II may not be able to be processed with certain RAW developing software. Capture One and Adobe Camera Raw will continue to be compatible as in the "RAW File Converter" software by FUJIFILM.
4. While continuous shooting, camera cannot turn off the power or freeze depending on the following shooting conditions.
(1) Conditions in which the camera will not turn off the normal way. (Pulling the battery is the only way to power down the camera)
Shutter speed changes from faster than 1/4000 second to slower than 1/4000 second with the following settings.
· [SHUTTER TYPE] ➔ [M+E]
· [Continuous shooting mode] ➔ [HIGH SPEED BURST]
· [Focus Mode] ➔ [AF-C]
[SHUTTERAE] ➔ [OFF]
(2) Conditions in which the camera may freeze/lockup.
Shutter speed changes from slower than 1/4000 second to faster than 1/4000 second with the following settings.
· [SHUTTER TYPE] ➔ [M+E]
· [Continuous shooting mode] ➔ [HIGH SPEED BURST]
· [Focus Mode] ➔ [AF-C]
· [SHUTTERAE] ➔ [OFF]
5. The image display on EVF, LCD or external monitor through HDMI may operate abnormally under certain conditions.
6. Other undisclosed minor bug fixes (there are a lot!!)
|
