fredmiranda.com Login

Manual Focus Nikon Glass

  
 
deang001
Offline
Details
p.1315 #1Manual Focus Nikon Glass
GeorgeBo wrote:
deang001 wrote
GeorgeBo wroteI think it has been a while since we have had a "gear shot"

Calling this clean up project complete. No light leaks, meter is accurate and shutter speed is accurate. Hopefully many more years of service.

Bronica EC-TL II sporting a Nikkor O-C 50mm f/2.8 lens

Shot with the Nikkor H-C 75mm f/2.8 adapted to the Fuji

Hope everyone is having/had a good weekend.

George
Beautiful! They’re awesome looking cameras. And what a great job you’ve done on it too. Some great cleaning tips as well

My EC-TL arrived early this week and I took for a test run with it yesterday. Seems OK so far. Meter seems fine and it’s in amazingly good condition. Even nicer than the eBay images. Get the negs back tomorrow and then I’ll have to scan them. Also ended up hunting down a mint condition (in the box and basically unused) Nikkor-HC 75/2.8 in Israel. Bought a focusing lever and extension tubes off of him as well.

https://www.ebay.com/itm/363172842452

https://www.ebay.com/itm/224334618157

The camera also came with a 50/2.8 OC like you have as well which was a bonus. Also bought a Zenzanon MC 135/3.5, a 6x4.5 back, a 45 degree prism and chimney as well. I’m pretty well set
Nice finds Dean! Can't wait to see your results. I think I got my focusing lever from the same source.

If you ever come across a focusing screen for the EC-TL II let me know. That is the only thing on mine that I would want to replace. It is not bad, but has a couple marks on it. The EC-TL II has different metering scale than the EC-TL.

I am struggling with dust on my scans at the moment. Low humidity and lots of static. But that will all change once summer rolls in. I will be wishing for low
...Show more →

Thanks George. I’ve followed your lead here with the cam and HC

Regarding the screen for your TLii, have you had a look here... https://rickoleson-brightscreen.com/main/

I’ve ordered a split screen from Rick which incorporates 6x4.5 frame lines as well. He’s quick to respond to email and has confirmed (and sent an image) that the screen has the SS numbers etched in which are lit up by the meter. The numbers are so small however, that only every second number is etched into the screen. For the missing numbers, the meter indicator shows a light in the blank space where that number would be. This will be fine I think.

He’s also confirmed that he’s revised the profile of the EC screen so that it no longer needs to use the metal frame from an old screen - it's now just a direct drop-in replacement. Tested and works well he said.

He doesn’t have the EC-TLii listed, but I can’t see why he wouldn’t be able to make one for you as it’s practically identical I think. With less SS numbers, you may also be able to get one with all the speeds showing.

He charges $80 per screen which seems very reasonable.

With the dust on the scans, are you using an anti-static brush and anti static cloth? I use a Matin brush and a cloth from Ilford before scanning the negs along with a rocket blower I get hardly any dust. The Nikon has ICE but with DSLR scanning scanning you need to prep even colour negs as well as possible.

Edited on May 05, 2021 at 04:05 PM · View previous versions
May 05, 2021 at 03:55 PM
deang001
Offline
Details
p.1315 #2Manual Focus Nikon Glass
James Markus wrote:
Dean and George - don't you use a grip? I always felt like the camera had to have one on it for control and safety.
Jim

https://tinyurl.com/2hzyvpmn

GeorgeBo wrote
deang001 wrote
GeorgeBo wroteI think it has been a while since we have had a "gear shot"

Calling this clean up project complete. No light leaks, meter is accurate and shutter speed is accurate. Hopefully many more years of service.

Bronica EC-TL II sporting a Nikkor O-C 50mm f/2.8 lens

Shot with the Nikkor H-C 75mm f/2.8 adapted to the Fuji

Hope everyone is having/had a good weekend.

George
Beautiful! They’re awesome looking cameras. And what a great job you’ve done on it too. Some great cleaning tips as well

My EC-TL arrived early this week and I took for a test run with it yesterday. Seems OK so far. Meter seems fine and it’s in amazingly good condition. Even nicer than the eBay images. Get the negs back tomorrow and then I’ll have to scan them. Also ended up hunting down a mint condition (in the box and basically unused) Nikkor-HC 75/2.8 in Israel. Bought a focusing lever and extension tubes off of him as well.

https://www.ebay.com/itm/363172842452

https://www.ebay.com/itm/224334618157

The camera also came with a 50/2.8 OC like you have as well which was a bonus. Also bought a Zenzanon MC 135/3.5, a 6x4.5 back, a 45 degree prism and chimney as well. I’m pretty well set
Nice finds Dean! Can't wait to see your results. I think I got my focusing lever from the same source.

If you ever come across a focusing screen for the EC-TL II let me know. That is the only thing on mine that I would want to replace. It is not bad, but has a couple marks on it. The EC-TL II has different metering scale than the EC-TL.

I am struggling with dust on my scans at the moment. Low humidity and lots of static. But that will all change once summer rolls in. I will be wishing for low humidity.

The IR spot and and scratch detection does not work with black and white film so looking at tools to help.


Might get one at some point, but for now the handling seems fine without one. I have checked some out on eBay though and they do look very nice.
May 05, 2021 at 04:00 PM
GeorgeBo
Offline
Details
p.1315 #3Manual Focus Nikon Glass
deang001 wrote:
GeorgeBo wrote
deang001 wrote
GeorgeBo wroteI think it has been a while since we have had a "gear shot"

Calling this clean up project complete. No light leaks, meter is accurate and shutter speed is accurate. Hopefully many more years of service.

Bronica EC-TL II sporting a Nikkor O-C 50mm f/2.8 lens

Shot with the Nikkor H-C 75mm f/2.8 adapted to the Fuji

Hope everyone is having/had a good weekend.

George
Beautiful! They’re awesome looking cameras. And what a great job you’ve done on it too. Some great cleaning tips as well

My EC-TL arrived early this week and I took for a test run with it yesterday. Seems OK so far. Meter seems fine and it’s in amazingly good condition. Even nicer than the eBay images. Get the negs back tomorrow and then I’ll have to scan them. Also ended up hunting down a mint condition (in the box and basically unused) Nikkor-HC 75/2.8 in Israel. Bought a focusing lever and extension tubes off of him as well.

https://www.ebay.com/itm/363172842452

https://www.ebay.com/itm/224334618157

The camera also came with a 50/2.8 OC like you have as well which was a bonus. Also bought a Zenzanon MC 135/3.5, a 6x4.5 back, a 45 degree prism and chimney as well. I’m pretty well set
Nice finds Dean! Can't wait to see your results. I think I got my focusing lever from the same source.

If you ever come across a focusing screen for the EC-TL II let me know. That is the only thing on mine that I would want to replace. It is not bad, but has a couple marks on it. The EC-TL II has different metering scale than the EC-TL.

I am struggling with dust on my scans at the moment. Low humidity and lots of static. But that will all change once summer rolls in. I will be wishing for low humidity.

The IR spot and and scratch detection does not work with black and white film so looking at tools to help.
Thanks George. I’ve followed your lead here with the cam and HC

Regarding the screen for your TLii, have you had a look here... https://rickoleson-brightscreen.com/main/

I’ve ordered a split screen from Rick which incorporates 6x4.5 frame lines as well. He’s quick to respond to email and has confirmed (and sent an image) that the screen has the SS numbers etched in which are lit up by the meter. The numbers are so small however, that only every second number is etched into the screen. For the missing numbers, the meter indicator shows a light in the blank space where that
...Show more →

Thanks for the link Dean! Going to send an e-mail to Rick tonight asking about the TLII screen possibility.

I do need to get a good antistatic brush and will check out the Matin and Ilford cloth. I need to get my Nikon scanner hooked back up, didn’t have an issue with that, but is SLOW. Issue I am having is with the negative holders on my Epson V850 (but that scanner is so much faster). It holds 3 35mm strips and the holder has a mylar or other material cover for the negatives. That is what is really the dust magnet. Static build up from the scanning movement maybe? Will have to try a few things.

G

May 05, 2021 at 05:29 PM
deang001
Offline
Details
p.1315 #4Manual Focus Nikon Glass
GeorgeBo wrote:
deang001 wrote
GeorgeBo wrote
deang001 wrote
GeorgeBo wroteI think it has been a while since we have had a "gear shot"

Calling this clean up project complete. No light leaks, meter is accurate and shutter speed is accurate. Hopefully many more years of service.

Bronica EC-TL II sporting a Nikkor O-C 50mm f/2.8 lens

Shot with the Nikkor H-C 75mm f/2.8 adapted to the Fuji

Hope everyone is having/had a good weekend.

George
Beautiful! They’re awesome looking cameras. And what a great job you’ve done on it too. Some great cleaning tips as well

My EC-TL arrived early this week and I took for a test run with it yesterday. Seems OK so far. Meter seems fine and it’s in amazingly good condition. Even nicer than the eBay images. Get the negs back tomorrow and then I’ll have to scan them. Also ended up hunting down a mint condition (in the box and basically unused) Nikkor-HC 75/2.8 in Israel. Bought a focusing lever and extension tubes off of him as well.

https://www.ebay.com/itm/363172842452

https://www.ebay.com/itm/224334618157

The camera also came with a 50/2.8 OC like you have as well which was a bonus. Also bought a Zenzanon MC 135/3.5, a 6x4.5 back, a 45 degree prism and chimney as well. I’m pretty well set
Nice finds Dean! Can't wait to see your results. I think I got my focusing lever from the same source.

If you ever come across a focusing screen for the EC-TL II let me know. That is the only thing on mine that I would want to replace. It is not bad, but has a couple marks on it. The EC-TL II has different metering scale than the EC-TL.

I am struggling with dust on my scans at the moment. Low humidity and lots of static. But that will all change once summer rolls in. I will be wishing for low humidity.

The IR spot and and scratch detection does not work with black and white film so looking at tools to help.
Thanks George. I’ve followed your lead here with the cam and HC

Regarding the screen for your TLii, have you had a look here... https://rickoleson-brightscreen.com/main/

I’ve ordered a split screen from Rick which incorporates 6x4.5 frame lines as well. He’s quick to respond to email and has confirmed (and sent an image) that the screen has the SS numbers etched in which are lit up by the meter. The numbers are so small however, that only every second number is etched into the screen. For the missing numbers, the meter indicator shows a light in the blank space where that number would be. This will be fine I think.

He’s also confirmed that he’s revised the profile of the EC screen so that it no longer needs to use the metal frame from an old screen - it's now just a direct drop-in replacement. Tested and works well he said.

He doesn’t have the EC-TLii listed, but I can’t see why he wouldn’t be able to make one for you as it’s practically identical I think. With less SS numbers, you may also be able to get one with all the speeds showing.

He charges $80 per screen which seems very reasonable.

With the dust on the scans, are you using an anti-static brush and anti static cloth? I use a Matin brush and a cloth from Ilford before scanning the negs along with a rocket blower I get hardly any dust. The Nikon has ICE but with DSLR scanning scanning you need to prep even colour negs as well as possible.
Thanks for the link Dean! Going to send an e-mail to Rick tonight asking about the TLII screen possibility.

I do need to get a good antistatic brush and will check out the Matin and Ilford cloth. I need to get my Nikon scanner hooked back up, didn’t have an issue with that, but is SLOW. Issue I am having is with the negative holders on my Epson V850 (but that scanner is so much faster). It holds 3 35mm strips and the holder has a mylar or other material cover for the negatives. That is what is really the dust
...Show more →

I actually just confirmed the frame lines I wanted in an email to him and also asked if he does screens for the TLii. I’ll let you know.

This is the brush I use https://www.amazon.com/Matin-Anti-Static-Control-Brush-Grade/dp/B00EYRXEIA

With the scanning, maybe give the Essential Film Holder a try along with Negative Lab Pro? It’s so quick and effective especially when putting an uncut roll thorough it. You can use the holder to DSLR scan anything from 35mm right up top 6x9.

You’re right about the Nikon being slow, but I still love it. It’s having a well earned rest now though. I think I’ve put around 700 rolls though it over the last decade. Still going strong.

May 05, 2021 at 06:00 PM
pbraymond
Offline
Details
p.1315 #5Manual Focus Nikon Glass
Native wildflowers past their prime (or maybe just hitting their prime as far as purpose goes), 50-135 AIS.






May 05, 2021 at 08:02 PM
James Markus
Offline
Details
p.1315 #6Manual Focus Nikon Glass
I never used a neck strap. These are incredibly well built grips, with a handy trigger finger shutter release, and a useful strobe mount. The deep finger groves with back of hand leather strap made the camera feel like an extension of my left hand. Plus there is a spot to attach a cable release. It is the odd things I miss about that old S. I could bang the waist level cover with one finger within milliseconds of it opening, and the magnifying focusing glass would snap into place with a "thunk". Never had a camera that was so easy to get critical focus, but the TLR Zeiss Ikon had a similar arrangement that was almost as good. Bronica always seemed to over build everything - "heavy duty".


GeorgeBo wrote:
I haven't really felt the need for one or really haven't thought about it I should say. I have a heavy duty Op/Tech strap and carry it with that. Using the waist level viewer or chimney viewer with the strap around my neck, gives me 3 points of contact. So far, so good.

But I will check them out.

You are just trying to help me spend more money

George

James Markus wroteDean and George - don't you use a grip? I always felt like the camera had to have one on it for control and safety.
Jim

https://tinyurl.com/2hzyvpmn

GeorgeBo wrote
deang001 wrote
GeorgeBo wroteI think it has been a while since we have had a "gear shot"

Calling this clean up project complete. No light leaks, meter is accurate and shutter speed is accurate. Hopefully many more years of service.

Bronica EC-TL II sporting a Nikkor O-C 50mm f/2.8 lens

Shot with the Nikkor H-C 75mm f/2.8 adapted to the Fuji

Hope everyone is having/had a good weekend.

George
Beautiful! They’re awesome looking cameras. And what a great job you’ve done on it too. Some great cleaning tips as well

My EC-TL arrived early this week and I took for a test run with it yesterday. Seems OK so far. Meter seems fine and it’s in amazingly good condition. Even nicer than the eBay images. Get the negs back tomorrow and then I’ll have to scan them. Also ended up hunting down a mint condition (in the box and basically unused) Nikkor-HC 75/2.8 in Israel. Bought a focusing lever and extension tubes off of him as well.

https://www.ebay.com/itm/363172842452

https://www.ebay.com/itm/224334618157

The camera also came with a 50/2.8 OC like you have as well which was a bonus. Also bought a Zenzanon MC 135/3.5, a 6x4.5 back, a 45 degree prism and chimney as well. I’m pretty well set
Nice finds Dean! Can't wait to see your results. I think I got my focusing lever from the same source.

If you ever come across a focusing screen for the EC-TL II let me know. That is the only thing on mine that I would want to replace. It is not bad, but has a couple marks on it. The EC-TL II has different metering scale than the EC-TL.

I am struggling with dust on my scans at the moment. Low humidity and lots of static. But that will all change once summer rolls in. I will be wishing for low humidity.

The IR spot and and scratch detection does not work with black and white film so looking at tools to help.


May 05, 2021 at 08:41 PM
GeorgeBo
Offline
Details
p.1315 #7Manual Focus Nikon Glass
I guess the race is on between Dean and I to see who finds the best condition one first

Thanks for enabling Jim

I need to get off of here for the night before I spend more money.

G

James Markus wrote:
I never used a neck strap. These are incredibly well built grips, with a handy trigger finger shutter release, and a useful strobe mount. The deep finger groves with back of hand leather strap made the camera feel like an extension of my left hand. Plus there is a spot to attach a cable release. It is the odd things I miss about that old S. I could bang the waist level cover with one finger within milliseconds of it opening, and the magnifying focusing glass would snap into place with a "thunk". Never had a camera that was
...Show more →
GeorgeBo wroteI haven't really felt the need for one or really haven't thought about it I should say. I have a heavy duty Op/Tech strap and carry it with that. Using the waist level viewer or chimney viewer with the strap around my neck, gives me 3 points of contact. So far, so good.

But I will check them out.

You are just trying to help me spend more money

George

James Markus wroteDean and George - don't you use a grip? I always felt like the camera had to have one on it for control and safety.
Jim

https://tinyurl.com/2hzyvpmn

GeorgeBo wrote
deang001 wrote
GeorgeBo wroteI think it has been a while since we have had a "gear shot"

Calling this clean up project complete. No light leaks, meter is accurate and shutter speed is accurate. Hopefully many more years of service.

Bronica EC-TL II sporting a Nikkor O-C 50mm f/2.8 lens

Shot with the Nikkor H-C 75mm f/2.8 adapted to the Fuji

Hope everyone is having/had a good weekend.

George
Beautiful! They’re awesome looking cameras. And what a great job you’ve done on it too. Some great cleaning tips as well

My EC-TL arrived early this week and I took for a test run with it yesterday. Seems OK so far. Meter seems fine and it’s in amazingly good condition. Even nicer than the eBay images. Get the negs back tomorrow and then I’ll have to scan them. Also ended up hunting down a mint condition (in the box and basically unused) Nikkor-HC 75/2.8 in Israel. Bought a focusing lever and extension tubes off of him as well.

https://www.ebay.com/itm/363172842452

https://www.ebay.com/itm/224334618157

The camera also came with a 50/2.8 OC like you have as well which was a bonus. Also bought a Zenzanon MC 135/3.5, a 6x4.5 back, a 45 degree prism and chimney as well. I’m pretty well set
Nice finds Dean! Can't wait to see your results. I think I got my focusing lever from the same source.

If you ever come across a focusing screen for the EC-TL II let me know. That is the only thing on mine that I would want to replace. It is not bad, but has a couple marks on it. The EC-TL II has different metering scale than the EC-TL.

I am struggling with dust on my scans at the moment. Low humidity and lots of static. But that will all change once summer rolls in. I will be wishing for low humidity.

The IR spot and and scratch detection does not work with black and white film so looking at tools to help.

May 05, 2021 at 08:48 PM
deang001
Offline
Details
p.1315 #8Manual Focus Nikon Glass
James Markus wrote:
I never used a neck strap. These are incredibly well built grips, with a handy trigger finger shutter release, and a useful strobe mount. The deep finger groves with back of hand leather strap made the camera feel like an extension of my left hand. Plus there is a spot to attach a cable release. It is the odd things I miss about that old S. I could bang the waist level cover with one finger within milliseconds of it opening, and the magnifying focusing glass would snap into place with a "thunk". Never had a camera that was
...Show more →
GeorgeBo wroteI haven't really felt the need for one or really haven't thought about it I should say. I have a heavy duty Op/Tech strap and carry it with that. Using the waist level viewer or chimney viewer with the strap around my neck, gives me 3 points of contact. So far, so good.

But I will check them out.

You are just trying to help me spend more money

George

James Markus wroteDean and George - don't you use a grip? I always felt like the camera had to have one on it for control and safety.
Jim

https://tinyurl.com/2hzyvpmn

GeorgeBo wrote
deang001 wrote
GeorgeBo wroteI think it has been a while since we have had a "gear shot"

Calling this clean up project complete. No light leaks, meter is accurate and shutter speed is accurate. Hopefully many more years of service.

Bronica EC-TL II sporting a Nikkor O-C 50mm f/2.8 lens

Shot with the Nikkor H-C 75mm f/2.8 adapted to the Fuji

Hope everyone is having/had a good weekend.

George
Beautiful! They’re awesome looking cameras. And what a great job you’ve done on it too. Some great cleaning tips as well

My EC-TL arrived early this week and I took for a test run with it yesterday. Seems OK so far. Meter seems fine and it’s in amazingly good condition. Even nicer than the eBay images. Get the negs back tomorrow and then I’ll have to scan them. Also ended up hunting down a mint condition (in the box and basically unused) Nikkor-HC 75/2.8 in Israel. Bought a focusing lever and extension tubes off of him as well.

https://www.ebay.com/itm/363172842452

https://www.ebay.com/itm/224334618157

The camera also came with a 50/2.8 OC like you have as well which was a bonus. Also bought a Zenzanon MC 135/3.5, a 6x4.5 back, a 45 degree prism and chimney as well. I’m pretty well set
Nice finds Dean! Can't wait to see your results. I think I got my focusing lever from the same source.

If you ever come across a focusing screen for the EC-TL II let me know. That is the only thing on mine that I would want to replace. It is not bad, but has a couple marks on it. The EC-TL II has different metering scale than the EC-TL.

I am struggling with dust on my scans at the moment. Low humidity and lots of static. But that will all change once summer rolls in. I will be wishing for low humidity.

The IR spot and and scratch detection does not work with black and white film so looking at tools to help.


"heavy duty" ... and very heavy!

I think with the prism & the 75/2.8 attached it weighs around 2.8kg! It really is like carrying around a brick.

The perfect hiking cam
May 05, 2021 at 09:41 PM
leighton w
Offline
Details
p.1315 #9Manual Focus Nikon Glass
GeorgeBo wrote:
Walking the line...

Same rig, F100, 45p, Ilford XP2 Super 400

George


Love the reflection in the track.
May 06, 2021 at 04:10 AM
leighton w
Offline
Details
p.1315 #10Manual Focus Nikon Glass
James Markus wrote:
I never used a neck strap.



Jim, just curious, what's your reason for not using a neck strap?

May 06, 2021 at 04:14 AM
 


Search in Used Dept. 

cadman342001
Offline
Details
p.1315 #11Manual Focus Nikon Glass
Dunno about Jim but I don't cos they get in the way. I just carry the camera by the grip or the lens foot if it's a big lens

leighton w wrote:
James Markus wroteI never used a neck strap.
Jim, just curious, what's your reason for not using a neck strap?


May 06, 2021 at 05:23 AM
mp356
Offline
Details
p.1315 #12Manual Focus Nikon Glass
GeorgeBo wrote:
Walking the line...

Same rig, F100, 45p, Ilford XP2 Super 400

George


George, great low angle image of the polished railhead!
May 06, 2021 at 05:41 AM
leighton w
Offline
Details
p.1315 #13Manual Focus Nikon Glass
One of these is not like the others.

TLW00136 by T. Leighton Womack, on Flickr
May 06, 2021 at 07:25 AM
James Markus
Offline
Details
p.1315 #14Manual Focus Nikon Glass
Leighton, I use neck straps on all my 35mm gear, but rarely ever put it around my neck. Only when I run out of hands or pockets do I hang the camera around my neck - like changing lenses plus an extender, teleconverter etc. Large long lenses quite often have tripod feet that are used to carry the camera and lens, because the lens outweighs the body and would stress the mount. Normally, I use the neck strap to sling my camera(s) over my shoulder. Professionally, I almost always had two cameras running, and a vest with pockets stuffed with lenses and gear. The medium format gear was too big and bulky - same with a 4x5 monorail I had. For those I had cases with a proper handle. Plus, I really don't like the feel of a strap on the back of my neck.
Jim

leighton w wrote:
James Markus wroteI never used a neck strap.
Jim, just curious, what's your reason for not using a neck strap?



May 06, 2021 at 08:50 AM
leighton w
Offline
Details
p.1315 #15Manual Focus Nikon Glass
James Markus wrote:
Leighton, I use neck straps on all my 35mm gear, but rarely ever put it around my neck. Only when I run out of hands or pockets do I hang the camera around my neck - like changing lenses plus an extender, teleconverter etc. Large long lenses quite often have tripod feet that are used to carry the camera and lens, because the lens outweighs the body and would stress the mount. Normally, I use the neck strap to sling my camera(s) over my shoulder. Professionally, I almost always had two cameras running, and a vest with pockets stuffed
...Show more →
leighton w wrote
James Markus wroteI never used a neck strap.
Jim, just curious, what's your reason for not using a neck strap?


I figured you must of used them in your career. I used a strap when I was shooting for the market, but now, with my camera in a small bag, I think I'm going to try not to use one. As Andy said, seems to get in the way.

And while I'm thinking about it. I sent back the the Tenba bag some of us were talking about some pages ago. I didn't like the fabric, it sort of made a crunching noise every time I open the bag. Anyway, I ended up getting the Domke bag made specifically for Fuji and love it.
May 06, 2021 at 09:10 AM
HCE HCE
Offline
Details
p.1315 #16Manual Focus Nikon Glass
Congratulations on the Bronica!!

Spring has arrived, the outdoors are beginning to take on a reflector oven quality, and it has been dry.

D850 24mm PC-E and 180mm f/2.8 AI-s






-Jay- © HCE HCE 2021

One of many wilted Prickley Pear





-Jay- © HCE HCE 2021

Ocatillo





-Jay- © HCE HCE 2021





-Jay- © HCE HCE 2021

May 06, 2021 at 09:38 AM
Ken Hill
Offline
Details
p.1315 #17Manual Focus Nikon Glass
PRE FOCUSED WITH THE 35-200. Just have to wait a spell for when the a/c is in the zone. Looks a lot larger that a 6' (2m) wingspan. Cropped for effect!



© Ken Hill 2021






May 06, 2021 at 11:27 AM
James Markus
Offline
Details
p.1315 #18Manual Focus Nikon Glass
Last night I got to see my 16 month old grandson again. Last time he ran away from the camera and grunted his disapproval. Though this first image is missed focus, he began with the same attitude as last time. Then it became a game that he laughed at the whole time. I used the 20mm f2.8 ais, and focused by windage - at least that is what I call it. I just set an approximate DOF on the barrel, and just pointed in his general direction. Couldn't even look through the viewfinder due to his almost constant running. Surprisingly 41 out of 81 shots were in focus. Meet Harry
































Edited on May 06, 2021 at 12:38 PM · View previous versions
May 06, 2021 at 12:34 PM
graytrekker
Offline
Details
p.1315 #19Manual Focus Nikon Glass
Finding Hidden Gems

I have posted a couple of waterfalls from the mountain stream close to my house (Mission Mountain Tribal Wilderness). I heard tales of another waterfall and have been exploring. The normal trail runs well above the stream, for good reason. The blow downs are thick down there. I did not yet find this other waterfall, but did come across a few "cataracts". This is one branch of a double I came across.

I "forced" myself to use my 28mm lens. I know some folks really love a 28, but I rarely use this lens - tending towards the 24 or the 35. I am experimenting here to get to know this lens better.

Spring is coming to Montana, but slowly this year. However, it will not be denied - snow forecasted on Sunday notwithstanding. With the warmer weather comes higher water - but still well off the gushing of the spring runoff, though.

NC cataract by Doug Stevens, on Flickr
Nikon Df + Nikkor 28mm f2 N-C Auto. 4 images focus stacked.

Have a great w/e everyone!

Doug

May 06, 2021 at 12:37 PM
GeorgeBo
Offline
Details
p.1315 #20Manual Focus Nikon Glass
James Markus wrote:
Last night I got to see my 16 month old grandson again. Last time he ran away from the camera and grunted his disapproval. Though this first image is missed focus, he began with the same attitude as last time. Then it became a game that he laughed at the whole time. I used the 20mm f2.8 ais, and focused by windage - at least that is what I call it. I just set an approximate DOF on the barrel, and just pointed in his general direction. Couldn't even look through the viewfinder due to his almost constant running.
...Show more →

So awesome Jim!
May 06, 2021 at 01:06 PM


FM ForumsNikon ForumJoin Upload & Sell
  
 

You are not logged inLog inRegister