fredmiranda.com Login

Manual Focus Nikon Glass

  
 
leighton w
Offline
Details
p.1302 #1Manual Focus Nikon Glass
Thanks Serge and Jim.

I have started looking at the Tenba DNA 10 and so far, it's in my top 5 choices.

Anyone else?
Apr 16, 2021 at 09:48 AM
AdaptedLenses
Offline
Details
p.1302 #2Manual Focus Nikon Glass
That's one of the coolest 3D printed things I've seen, better quality then expected as well. Do you have any info how he generated the file from an image?

James Markus wrote:
Jay,
My son's cubes look like this. He under powered the light source using a led tea light. I grabbed a led light panel to give you an idea of what the lit photos look like (there is a cyan cast - but I removed it). There are photos of my seven kids, grandson, wife, cats etc. One panel on each cube slides in a track/groove to complete the cube, one is blank, and one has a hole for the tea light. His intention was to have the image on the inside, but somehow it got mixed up. Shot
...Show more →

Apr 16, 2021 at 12:52 PM
pbraymond
Offline
Details
p.1302 #3Manual Focus Nikon Glass
leighton w wrote:
While it is slow, I have a question.

I'm looking for a new bag, something fairly small. Something that can hold a body with lens attached with room for an additional 2 lenses.

Tell me your favorite bag that fits this requirement. To give you an idea, I have been looking at the Thanktank Retrospective 5 or 7. I already own the 10, but it's too big and boxy.


I like TT's mirrorless mover, use one for m43 setup. Just the right padding for my use, slim/trim and nothing much hanging out, and if I really need to I can convert it to a waist pack for lightweight setup. I like having the small outside pleated pockets.

I also have a Retrospective 10 that does not see much use, I'm not a huge fan of velcro, and the fact that the flap opens towards my body. I suppose I could carry it the other way around. I do like the looks of the Retrospective, but when I want a bag that size, I find the TT Speed series (discontinued) much more suitable to the way I work.

Overall, I find TT's choice of padding thickness and stiffness to be suit my use case best.
Apr 16, 2021 at 12:53 PM
AdaptedLenses
Offline
Details
p.1302 #4Manual Focus Nikon Glass
Retro 6 will hold 4 extra lenses and a body + lens. I have a black one if you want it cheap. 5 probably would better fit what you're looking for, little smaller. I also like the Tenba Cooper line, a 13 Slim probably would work well and I think they may make an 8. It's a little less modern looking than the DNA line to me.

leighton w wrote:
While it is slow, I have a question.

I'm looking for a new bag, something fairly small. Something that can hold a body with lens attached with room for an additional 2 lenses.

Tell me your favorite bag that fits this requirement. To give you an idea, I have been looking at the Thanktank Retrospective 5 or 7. I already own the 10, but it's too big and boxy.


Apr 16, 2021 at 01:07 PM
leighton w
Offline
Details
p.1302 #5Manual Focus Nikon Glass
Thanks for the replies all. But after several youtube videos. my itchy finger hit the buy it now button for the Tenba DNA 10. Anyone want a Retrospective 10 cheap?
Apr 16, 2021 at 01:28 PM
leighton w
Offline
Details
p.1302 #6Manual Focus Nikon Glass
AdaptedLenses wrote:
Retro 6 will hold 4 extra lenses and a body + lens. I have a black one if you want it cheap. 5 probably would better fit what you're looking for, little smaller. I also like the Tenba Cooper line, a 13 Slim probably would work well and I think they may make an 8. It's a little less modern looking than the DNA line to me.

leighton w wroteWhile it is slow, I have a question.

I'm looking for a new bag, something fairly small. Something that can hold a body with lens attached with room for an additional 2 lenses.

Tell me your favorite bag that fits this requirement. To give you an idea, I have been looking at the Thanktank Retrospective 5 or 7. I already own the 10, but it's too big and boxy.


That's what I like about the DNA line, more modern looks. Plus, it will hold a water bottle on the side.
Apr 16, 2021 at 01:34 PM
Reagan
Offline
Details
p.1302 #7Manual Focus Nikon Glass
I should ask my wife about the bag
She carries everything and I just hold out my hand when I want something

R
Apr 16, 2021 at 01:49 PM
James Markus
Offline
Details
p.1302 #8Manual Focus Nikon Glass
AdaptedLenses,
I shared this with Jay earlier via a PM, but in case anyone else is interested...
I asked where he got the info on the photo cubes. Here it is
https://lithophanemaker.com/Lithophane%20Light%20Box.html

More options here
https://lithophanemaker.com

He says you have to use a resin printer to make the photo boxes, and he recommends water soluble resin. The acetone based resins are stinky. (actually his water based ones were stinky as well but the smell has gone away)

3D Printer he used is linked here
https://tinyurl.com/3czxasye

Hope that helps
Jim



AdaptedLenses wrote:
That's one of the coolest 3D printed things I've seen, better quality then expected as well. Do you have any info how he generated the file from an image?

James Markus wroteJay,
My son's cubes look like this. He under powered the light source using a led tea light. I grabbed a led light panel to give you an idea of what the lit photos look like (there is a cyan cast - but I removed it). There are photos of my seven kids, grandson, wife, cats etc. One panel on each cube slides in a track/groove to complete the cube, one is blank, and one has a hole for the tea light. His intention was to have the image on the inside, but somehow it got mixed up. Shot with the 105mm f4 micro ais.

I have two of the 122mm L37c Nikon UV filters. One for the 200mm f2.0 ai, and the other for the 300mm f2.8 ais (which has an internal one, but wanted protection for the main element)
Jim

http://www.photomatter.com/2021/cube-1.jpg
http://www.photomatter.com/2021/cube-2.jpg
http://www.photomatter.com/2021/cube-3.jpg


Apr 16, 2021 at 03:44 PM
AdaptedLenses
Offline
Details
p.1302 #9Manual Focus Nikon Glass
Thanks for sending me down this rabbit hole!

James Markus wrote:
AdaptedLenses,
I shared this with Jay earlier via a PM, but in case anyone else is interested...
I asked where he got the info on the photo cubes. Here it is
https://lithophanemaker.com/Lithophane%20Light%20Box.html

More options here
https://lithophanemaker.com

He says you have to use a resin printer to make the photo boxes, and he recommends water soluble resin. The acetone based resins are stinky. (actually his water based ones were stinky as well but the smell has gone away)

3D Printer he used is linked here
https://tinyurl.com/3czxasye

Hope that helps
Jim

AdaptedLenses wroteThat's one of the coolest 3D printed things I've seen, better quality then expected as well. Do you have any info how he generated the file from an image?

James Markus wroteJay,
My son's cubes look like this. He under powered the light source using a led tea light. I grabbed a led light panel to give you an idea of what the lit photos look like (there is a cyan cast - but I removed it). There are photos of my seven kids, grandson, wife, cats etc. One panel on each cube slides in a track/groove to complete the cube, one is blank, and one has a hole for the tea light. His intention was to have the image on the inside, but somehow it got mixed up. Shot with the 105mm f4 micro ais.

I have two of the 122mm L37c Nikon UV filters. One for the 200mm f2.0 ai, and the other for the 300mm f2.8 ais (which has an internal one, but wanted protection for the main element)
Jim

http://www.photomatter.com/2021/cube-1.jpg
http://www.photomatter.com/2021/cube-2.jpg
http://www.photomatter.com/2021/cube-3.jpg

Apr 16, 2021 at 06:53 PM
Phong.nh
Offline
Details
p.1302 #10Manual Focus Nikon Glass
Apr 16, 2021 at 07:32 PM
 


Search in Used Dept. 

GeorgeBo
Offline
Details
p.1302 #11Manual Focus Nikon Glass
Right behind you Matt. 😎

AdaptedLenses wrote:
Thanks for sending me down this rabbit hole!

James Markus wroteAdaptedLenses,
I shared this with Jay earlier via a PM, but in case anyone else is interested...
I asked where he got the info on the photo cubes. Here it is
https://lithophanemaker.com/Lithophane%20Light%20Box.html

More options here
https://lithophanemaker.com

He says you have to use a resin printer to make the photo boxes, and he recommends water soluble resin. The acetone based resins are stinky. (actually his water based ones were stinky as well but the smell has gone away)

3D Printer he used is linked here
https://tinyurl.com/3czxasye

Hope that helps
Jim

AdaptedLenses wroteThat's one of the coolest 3D printed things I've seen, better quality then expected as well. Do you have any info how he generated the file from an image?

James Markus wroteJay,
My son's cubes look like this. He under powered the light source using a led tea light. I grabbed a led light panel to give you an idea of what the lit photos look like (there is a cyan cast - but I removed it). There are photos of my seven kids, grandson, wife, cats etc. One panel on each cube slides in a track/groove to complete the cube, one is blank, and one has a hole for the tea light. His intention was to have the image on the inside, but somehow it got mixed up. Shot with the 105mm f4 micro ais.

I have two of the 122mm L37c Nikon UV filters. One for the 200mm f2.0 ai, and the other for the 300mm f2.8 ais (which has an internal one, but wanted protection for the main element)
Jim

http://www.photomatter.com/2021/cube-1.jpg
http://www.photomatter.com/2021/cube-2.jpg
http://www.photomatter.com/2021/cube-3.jpg


Apr 16, 2021 at 08:42 PM
NightOwl Cat
Offline
Details
p.1302 #12Manual Focus Nikon Glass
I thought those things were way more expensive than that...

James Markus wrote:
AdaptedLenses,
I shared this with Jay earlier via a PM, but in case anyone else is interested...
I asked where he got the info on the photo cubes. Here it is
https://lithophanemaker.com/Lithophane%20Light%20Box.html

More options here
https://lithophanemaker.com

He says you have to use a resin printer to make the photo boxes, and he recommends water soluble resin. The acetone based resins are stinky. (actually his water based ones were stinky as well but the smell has gone away)

3D Printer he used is linked here
https://tinyurl.com/3czxasye

Hope that helps
Jim

AdaptedLenses wroteThat's one of the coolest 3D printed things I've seen, better quality then expected as well. Do you have any info how he generated the file from an image?

James Markus wroteJay,
My son's cubes look like this. He under powered the light source using a led tea light. I grabbed a led light panel to give you an idea of what the lit photos look like (there is a cyan cast - but I removed it). There are photos of my seven kids, grandson, wife, cats etc. One panel on each cube slides in a track/groove to complete the cube, one is blank, and one has a hole for the tea light. His intention was to have the image on the inside, but somehow it got mixed up. Shot with the 105mm f4 micro ais.

I have two of the 122mm L37c Nikon UV filters. One for the 200mm f2.0 ai, and the other for the 300mm f2.8 ais (which has an internal one, but wanted protection for the main element)
Jim

http://www.photomatter.com/2021/cube-1.jpg
http://www.photomatter.com/2021/cube-2.jpg
http://www.photomatter.com/2021/cube-3.jpg


Apr 17, 2021 at 02:36 AM
saph
Offline
Details
p.1302 #13Manual Focus Nikon Glass
EZ-DUZ-IT by Maryland Photos, on Flickr

Leica II with 5cm f2 HC, collapsible. FP4 Plus developed with Cinestill monobath

Speedy boat at Baltimore waterfront. The Leica II's max speed is 1/500s (or thereabouts, in reality) so it was just enough to keep the boat and its occupants from turning too fuzzy.
Apr 17, 2021 at 05:51 AM
leighton w
Offline
Details
p.1302 #14Manual Focus Nikon Glass
saph wrote:
The Leica II's max speed is 1/500s (or thereabouts, in reality) so it was just enough to keep the boat and its occupants from turning too fuzzy.


I guess this means you'll just have to by a new modern Leica.

Edited on Apr 18, 2021 at 03:40 AM · View previous versions
Apr 17, 2021 at 05:55 AM
spoupard
Offline
Details
p.1302 #15Manual Focus Nikon Glass
leighton w wrote:
Thanks Serge and Jim.

I have started looking at the Tenba DNA 10 and so far, it's in my top 5 choices.

Anyone else?

I was going to recommend the DNA 11. I have a DNA 11 and my wife has a DNA 10. The 10 may be a little tight, depending on the size of the lenses you plan to carry. In the DNA 11, I would carry a Fuji X-T2 with 18-55 mounted on the camera, 12mm Rokinon, and 55-200mm Fuji with plenty of room left for all kinds of accessories. My wife uses a 10 with her Olympus M43 kit with camera and two lenses and a small flash. It's just right for her, but it may be a little tight for anything larger than M43.

EDIT: I should have read the whole thread before I replied. I see that you already ordered the 10. The thing I like most about the DNA series is that you can open the top zipper for quick access to the camera or lenses. You don't have to open the flap unless you need access to accessories.

Edited on Apr 17, 2021 at 06:17 AM · View previous versions
Apr 17, 2021 at 06:11 AM
saph
Offline
Details
p.1302 #16Manual Focus Nikon Glass
Leighton, did I see something about rabbit holes on this page?



leighton w wrote:
saph wroteThe Leica II's max speed is 1/500s (or thereabouts, in reality) so it was just enough to keep the boat and its occupants from turning too fuzzy.
I guess this means you'll just have to by a new modern Leica. D)

Apr 17, 2021 at 06:16 AM
saph
Offline
Details
p.1302 #17Manual Focus Nikon Glass
With that same outdated Leica (I think I dated it on the Leica serial # listings to ~1932), and more modern collapsible Nikkor 5cm f2 HC (~1949!). Same FP4+ roll.

JonesFallsWaterWay by Maryland Photos, on Flickr

This is the Jones Falls waterway emptying to the right into Baltimore's Inner Harbor.

The history of this waterway is interesting, it caught fire and exploded in 1926. The flames, 40 feet high in some places, ran down to just half a block to the left of the frame here, where it crosses Pratt Street, the major street in downtown.

The stream had unfortunately been badly polluted by people dumping all kinds of sewage and industrial waste. Its interesting to read that before all that destruction, dolphins used to come all the way up the Chesapeake Bay to feed.

Rather than clean up the stream, the city just buried it. There's a highway, the Jones Falls expressway, that now overlays the stream through most of the city.

https://en.wikipedia.org/wiki/Jones_Falls

https://www.baltimoresun.com/news/bs-xpm-1991-03-17-1991076175-story.html
Apr 17, 2021 at 06:28 AM
saph
Offline
Details
p.1302 #18Manual Focus Nikon Glass
And now looking upstream along Jones Falls (from the same spot).

JonesFallsWaterWay2 by Maryland Photos, on Flickr

That building I have taken pictures of with everything from the little Leica II/5cm f2 collapsible combo to the Wista 4X5. Seems to always fascinate me.
Apr 17, 2021 at 06:46 AM
leighton w
Offline
Details
p.1302 #19Manual Focus Nikon Glass
spoupard wrote:
leighton w wroteThanks Serge and Jim.

I have started looking at the Tenba DNA 10 and so far, it's in my top 5 choices.

Anyone else?
I was going to recommend the DNA 11. I have a DNA 11 and my wife has a DNA 10. The 10 may be a little tight, depending on the size of the lenses you plan to carry. In the DNA 11, I would carry a Fuji X-T2 with 18-55 mounted on the camera, 12mm Rokinon, and 55-200mm Fuji with plenty of room left for all kinds of accessories. My wife uses a 10 with her Olympus M43 kit with camera and two lenses and a small flash. It's just right for her, but it may be a little tight
...Show more →

Yea, the zipper on top, plus the build quality is what sold me. I almost went for the 11, but wanted the slimmer version.

I'm planning on carrying my X-T2, 28mm ais, 55mm f2.8 and 50-135mm. Think it will fit? Judging by what I saw in videos, it should be no problem.
Apr 17, 2021 at 06:48 AM
rafaelcasd
Offline
Details
p.1302 #20Manual Focus Nikon Glass
So the Novoflex LEINIK did not have the right flange distance, the 2.1cm mounted but now it was to far back to focus, instead of too far forward. Giving up on the 2.1 CM F mount.

The lens and adapter are going back to the sellers.

leinik adapter by Rafael Batlle, on Flickr

Lens is in great condition but it is too much trouble.

2.1cm ebay 1 by Rafael Batlle, on Flickr

For revenge, I took the 18mm 4.0 for a spring walk in the hillside.

18mm 4.0 by Rafael Batlle, on Flickr

Many trees have grown large. That little bush center left will grow as large as the tree.

nikkor 18mm 4 D810 home tree 01 by Rafael Batlle, on Flickr
Apr 17, 2021 at 12:27 PM


FM ForumsNikon ForumJoin Upload & Sell
  
 

You are not logged inLog inRegister