p.1 #1SoldContax 35-70mm f/3.4 Zeiss NIKON MOUNT LEITAXED
I have a Zeiss 35-70mm f/3.4 that I am looking at selling. I have converted it to Nikon mount with the Leitax adapter. The conversion was a pain in the A*$!!! The lens works 100% like it should with absolutely no issues. The lens focuses to infinity and is razor sharp.
My recommendation, do not buy this lens unless you have a D3/D700/D300/D200/D2/etc type camera that will meter with AI lenses. You can certainly use it with others, just not as fun in my opinion
I just want my investment + the cost of the leitax conversion back......$570. That is shipped with echeck/GIFT. If you want to use CC please add 3%
Details:
You know the lens Exterior = Flawless Optics = Very clean, no scratches, haze, fungus, etc Dust = Yes. There is dust on the front element (probably from when I did the conversion not being careful enough). Honestly, I have not seen an impact to any photo I have taken with the lens. Samples are below.
Other Notes for full disclosure: Note 1: Like I mentioned, it was a pain to make the conversion. I scratched (let's be honest - heavily) the flat cover that rotates around the lens. No big deal, simply cosmetic on the inside of the lens. This will not impact photos at all. There is no hole or anything else that would make an impact. This is strictly a cover that got scratched.
Note 2: There is a picture below from the leitax.com website showing the spring that needs to move from one screw to the other. Well, I couldn't get it off the main screw that it was supposed to stay on to move to the other....so I kind of just left it in there hanging as I knew that it would not impact anything. It does not hang up the aperture or anything else. Only thing is that you can slightly see it underneath the (scratched) flat cover that rotates around the lens.
I'm assuming that since it is Nikon mount you can simply put an F-->EOS adapter on this thing and go if you want it on Canon. For Nikon users, it works 100% correctly.