fredmiranda.com Login
This topic is in the 2009 archive. You can read it and like its posts here. It is read only.

Archive 2009Infinity Testing

  
 
thrice
Offline

p.1 #1Infinity Testing
I decided to test all my lenses for infinity focus, at the moment it seems my only correct lenses are my Leica 90AA and Canon 24/1.4L. I'm not so concerned about the lenses that focus a touch beyond infinity (eg. AF lenses and the Pentax) but I wish I could reach infinity with all my Leica's and my 135/2L I'm not sure about... the target is more than 1km away.

Leica 19mm Elmarit-R
http://i9.photobucket.com/albums/a96/Nephilim666/19Infinity.jpg

Leica 28mm Elmarit-R
http://i9.photobucket.com/albums/a96/Nephilim666/28Infinity.jpg

Leica 35mm Summicron-R
http://i9.photobucket.com/albums/a96/Nephilim666/35Infinity.jpg

Leica 90mm APO-Summicron-R ASPH
http://i9.photobucket.com/albums/a96/Nephilim666/90Infinity.jpg

Leica 100mm APO-Macro-Elmarit-R
http://i9.photobucket.com/albums/a96/Nephilim666/100Infinity.jpg

Pentax-A 50mm 1:1.2
Here is the infinity marker result
http://i9.photobucket.com/albums/a96/Nephilim666/50Infinitymarker.jpg

And here is manual focused at infinity bear in mind these are wide open so are likely to be soft regardless
http://i9.photobucket.com/albums/a96/Nephilim666/Infinityfocused.jpg

Canon 24/1.4L
Infinity marker seems on
http://i9.photobucket.com/albums/a96/Nephilim666/24Infinitymarker.jpg

Canon 135/2L
infinity marker
http://i9.photobucket.com/albums/a96/Nephilim666/135Infinitymarker.jpg

Manual focused
http://i9.photobucket.com/albums/a96/Nephilim666/135Infinityfocused.jpg
Mar 31, 2009 at 10:27 PM
convert
Offline
Details
p.1 #2Infinity Testing
It seems that only Leica 90mm and 100mm reach really infinity, I guess all the pics were made at wide open.
I have similar question during my all converted lenses as well.
Mar 31, 2009 at 10:44 PM
thrice
Offline
Details
p.1 #3Infinity Testing
I contacted the Aussie service centre for Leica and they say all my lenses would need to go to Germany for calibration very expensive. Perhaps I'll just live with having built-in extension tubes (my 19 focuses down to 15cm instead of 30cm) and use f/11 to get infinity.
Mar 31, 2009 at 10:48 PM
convert
Offline
Details
p.1 #4Infinity Testing
It might be usefull for you to measure the thickness of your adapter, mine is exactly 2.8 mm, and all my leica lenses reach infinity focus at wide open.
If you send it to germany , it would be expensive.
Mar 31, 2009 at 10:59 PM
runamuck
Offline
Details
p.1 #5Infinity Testing
Almost all lenses will travel beyond infinity focus. This is not a flaw, but simply allowing for changes brought on by temperature fluctuations.
Mar 31, 2009 at 11:11 PM
patrickphoto
Offline
Details
p.1 #6Infinity Testing
runamuck wrote:
Almost all lenses will travel beyond infinity focus. This is not a flaw, but simply allowing for changes brought on by temperature fluctuations.


beat me to it. just wondering why you would check them all wide open. I understand that you want the shallowest DOF to make it easier to discern focus, but besides the obvious ones, this could contribute to misreading your examples. For example, the 100 and 90 are both close, and I would expect the 90 will have better microcontrast, and look sharper, when in fact both, judging from the samples shown, be focused equally well to infinity.

Mar 31, 2009 at 11:19 PM
thrice
Offline
Details
p.1 #7Infinity Testing
I checked them wide open for the exact reason you state, shallowest DOF, I suppose I could try them at 2.8 but that is beside the point as you can see the plane of focus is closer on the ones which matter.

My adapters are all VERY close to 3.00mm convert, which brand is yours? I may have to get a fotodiox adapter and switch it between lenses as necessary. Putting the 90mm adapter on the 35/2 Summicron still doesn't allow me to focus to infinity though.
Apr 01, 2009 at 12:54 AM
convert
Offline
Details
p.1 #8Infinity Testing
The perfect adapter I am using, is from novoflex (expensive), on the other side I use 6 different no name adapter ( I guess made in china) and cause of tolerance of their product , I have modified it.
Most of them have 6 screw , if you open and sand carefully, I am sure that you 'll get better results with your leica lenses.
Apr 01, 2009 at 01:32 AM
thrice
Offline
Details
p.1 #9Infinity Testing
I have a dremel tool I can use as well. there is a lip that I can grind down and it should take a fraction of a mm off the overall distance.

I think I will see if Jim Buchanan can make his custom conversion kits a bit thin for me, I like the idea of a reversible rigid mount conversion.
Apr 01, 2009 at 02:20 AM
thrice
Offline
Details
p.1 #10Infinity Testing
ok, it helped a little bit but I also managed to cut *through* the adapter (only a tiny slit or two) so I'm going to order a fotodiox adapter and see if that helps, if it doesn't I guess I'll try a novoflex.

Edit: the poor ass in me decided to try the DVD Technik russian made adapters which are one piece as opposed to two piece. Should be easier to sand it thinner as well if need be as there are no screws to contend with.
Apr 01, 2009 at 03:06 AM
JimBuchanan
Offline
Details
p.1 #11Infinity Testing
runamuck wrote:
Almost all lenses will travel beyond infinity focus. This is not a flaw, but simply allowing for changes brought on by temperature fluctuations.


Almost all AF lenses... maybe.

I do note the past infinity ability of some AF lenses to compensate for temp etc. However, manual lenses, by their nature, should have an accurate infinity setting, as the barrel should turn to its infinity stop and the shooter fully expect an infinity setting when shooting an infinity scene. I couldn't imagine successful shots, at an air show, for example, if my chosen manual tele focused past infinity.

As a side note, the Leica M lenses don't have infinity adjustment screws and aren't adjustable at all. This has to do with the lens/rangefinder arrangement, of course. M lenses are not designed to focus past infinity.
Apr 01, 2009 at 07:54 AM
JimBuchanan
Offline
Details
p.1 #12Infinity Testing
One big variable in the manual lens-adapter equation is the state of the lens. Having the opportunity to observe a few dozen Rokkor 58s, to date, I have found an ideal thickness the custom spacer needs to be to get very close to infinity focus. If I were to plot the data points, it would be a bell shaped curve with the most accurate thickness at the top. There will be outliers, which represents lenses focusing short of infinity and past infinity. This occurs from one's previous lens maintenance, repair, or attempt at infinity focus with a camera, or simple mis-adjustment. In the case of the Rokkor, we're talking a 30 year span. That's why I have tried to detail an accurate way to adjust for infinity thru the lens adjustment screws.

Our expectation from a high quality german lens maker, is more precise lens adjustment, but the story is the same for Leica, maybe to a lesser degree. The R lenses also have infinity adjustment screws. There could be a few exceptions, such as the floating element designs and zooms.

Through the iterative process of infinity adjusting my 28 Elmarit (serviced by Leica NJ), by adjusting the thickness of one of my screw-on adapters, I'm at .116" or 2.946 mm. Pebbelplace.com has an illustration on his Lecia page with a set of calipers on a Leica-EOS adapter at 2.942 mm. So, I feel the thickness I am using would be plotted at the top of the graph, as being very accurate. My thickness tolerance is about .001", or +/- .0005" or less.

The above is a long winded way of saying there is variation in even the best lenses infinity settings. A cheap adapter could have the correct thickness, but the lens maybe mis-adjusted.

Reasons to stay clear of cheap adapters, is 2-piece designs used on heavy telephotos, sloppy fit, variable thickness around the adapter, aluminum versus bronze, etc.

Apr 01, 2009 at 08:13 AM
thrice
Offline
Details
p.1 #13Infinity Testing
Got my $20 dvdtechnik adapter... and I have infinity on my 35 Cron now.

http://i9.photobucket.com/albums/a96/Nephilim666/35CronDVDTechnik.jpg

The adapter is a very snug fit on the lens, no wiggle and perfect size indent for the Leica-R locking pin. It has a bit of wiggle on the body, they could fix this with a slightly narrower EOS locking pin indent but I can fix that myself

Time to order one for my 28 and one for my 19.
Apr 14, 2009 at 10:21 PM
wayne seltzer
Offline
Details
p.1 #14Infinity Testing
I use the Fotodiox pro adapter with my 100 APO and 180 APO 2.8 and they focus for infinity at the infinity mark. I also added AF confirm chips which work well.
Apr 14, 2009 at 10:40 PM
thrice
Offline
Details
p.1 #15Infinity Testing
my big_is adapters also focus to infinity on my 100APO and 90APO (like in the first post), not quite sure why they don't with my wides but at least if the dvdtechnik adapters are off I can get them lathed 0.2mm thinner quite easily as they're one piece.
Apr 14, 2009 at 11:27 PM
fab1
Offline
Details
p.1 #16Infinity Testing
I have solved the infinity focus problems finding the right adapter thickness for each Leica R lenses that I have.
Leica R 19 (pre ROM) : Haoda adapter thickness from 2,986 to 2,961mm
Leica R 35 (pre ROM) : Novoflex adapter thickness from 2,928 to 2,871 mm
Leica R 50 (pre ROM) : Haoda adapter thickness from 2,995 to 2,962 mm
Leica R 90 (pre APO) : Kindai adapter thickness from 3,000 to 2,987 mm
Leica R 180/3,4 APO : Kindai adapter thickness from 3,000 to 2,979 mm

I use them on a Canon 5D.

Hope this could help.
Apr 15, 2009 at 11:49 AM
FM ForumsLeica & Alternative GearJoin Upload & Sell
  
 

You are not logged inLog inRegister