fredmiranda.com
Login
Moderated by: Fred Miranda

Archive 2008 · New 1D Mark III - 16GB SDHC do-able?

  
 
David Tognazzi
Offline

p.1 #1New 1D Mark III - 16GB SDHC do-able?
Anyway to use a 16GB SDHC card in the 1D Mark III?
I searched the posts here, but did not see anything related to this error.

Just says can't format, replace card, etc. Installing the same brand 8GB SDHC works fine. Checking off Low Level Format errors right away, not checking low level format takes a long time til it errors out. Won't see 16GB SDHC even if I format it 1st in a PC card reader. Same 16GB card works fine in my XSi without issues.

thanks
Dec 26, 2008 at 04:37 PM
Deborah Kolt
Offline
Details
p.1 #2New 1D Mark III - 16GB SDHC do-able?
I've been using a couple of Transcend 16 gb SDHC cards in two different Mark IIIs for months with no problems. It should work. Have you tried to format on the computer first, then put it in the camera? That once solved a similar problem with a new card for me.

Edit - Just noticed you said the camera doesn't recognize the card when formatted in the reader, either. So much for my suggestion.
Dec 26, 2008 at 05:37 PM
Lars Johnsson
Offline
Details
p.1 #3New 1D Mark III - 16GB SDHC do-able?
I have also been using 5-6 different 16GB SDHC cards in my MKIII for nearly a years time now. No problem
Dec 26, 2008 at 05:42 PM
David Tognazzi
Offline
Details
p.1 #4New 1D Mark III - 16GB SDHC do-able?
Ah, dang. So it's brand specific? The ones I have are "A Data" brand, and they work in my friend's 1Ds Mark III (note he has the 21.1 MP one) and they work in my XSi. So seems odd not in the 1D Mark III (10.1 MP).
Dec 26, 2008 at 05:54 PM
Lars Johnsson
Offline
Details
p.1 #5New 1D Mark III - 16GB SDHC do-able?
David Tognazzi wrote:
Ah, dang. So it's brand specific? The ones I have are "A Data" brand, and they work in my friend's 1Ds Mark III (note he has the 21.1 MP one) and they work in my XSi. So seems odd not in the 1D Mark III (10.1 MP).


No it's not brand specific as you wrote. They also work in your camera. If it doesn't work, either the card or your camera has a fault
Dec 27, 2008 at 01:17 AM
David Tognazzi
Offline
Details
p.1 #6New 1D Mark III - 16GB SDHC do-able?
Lars Johnsson wrote:
David Tognazzi wroteAh, dang. So it's brand specific? The ones I have are "A Data" brand, and they work in my friend's 1Ds Mark III (note he has the 21.1 MP one) and they work in my XSi. So seems odd not in the 1D Mark III (10.1 MP).
No it's not brand specific as you wrote. They also work in your camera. If it doesn't work, either the card or your camera has a fault


Yikes. Hope it's not the camera. I just got it from B&H a few days ago. The free over-night shipping pushed me over the edge.

I was trying to decide on a 5D Mark II or a 1D Mark III. Always wanted a 1 series, and the 1Ds is just a bit too much money.
Dec 27, 2008 at 06:17 AM
David Tognazzi
Offline
Details
p.1 #7New 1D Mark III - 16GB SDHC do-able?
Lars Johnsson wrote:
I have also been using 5-6 different 16GB SDHC cards in my MKIII for nearly a years time now. No problem


Are you able to format them in your 1D Mark III or you have to format in your PC via a card reader first?
Dec 27, 2008 at 06:25 AM
Lars Johnsson
Offline
Details
p.1 #8New 1D Mark III - 16GB SDHC do-able?
Yes you can format the card in your camera. I always do that
Dec 27, 2008 at 06:39 AM
David Tognazzi
Offline
Details
p.1 #9New 1D Mark III - 16GB SDHC do-able?
Lars Johnsson wrote:
Yes you can format the card in your camera. I always do that


I just tried another test. I formatted it in a different card reader on my PC, put it in the 1D Mark III and it worked. OK, a work-around. I tried to format it in the camera with low level checked, it said can't format, replace card (!) Ok, re-formated it in the SanDisk PC card reader again, put in camera, sees it. Tried to format it in camer with low level UN checked, it works.

Ok, so as long as I format the card in the SanDisk PC card reader first, and just re-format it in the camera without low level, it works. Low level checked makes the card un-readable til re-formated in the PC card reader. Strange.
Dec 27, 2008 at 06:52 AM
David Tognazzi
Offline
Details
p.1 #10New 1D Mark III - 16GB SDHC do-able?
Another update: Using another brand worked. Strange. It will even low level format it. Guess that is good, at least. Just stuck with two "bad" 16GB cards.
Dec 31, 2008 at 06:21 PM
FM ForumsCanon ForumJoin Upload & Sell
  
 

You are not logged inLog inRegister

Switch to mobile view