I've converted an OpTech binocular strap to be similar. Only one cam this way, with the other around my neck. The OpTech already has a leather patch on the back where the straps cross. I wear a Lowepro belt as well, and I just strap the camera to the belt to keep it from swinging around. The strap is Velcro and is instant off and on. The camera is at a height where it 'sits' on the belt with the lens pointing across the tummy. It is out of the way there. The thing with two cameras is--you need the padding. With just one camera, you can go without the pad and it basically disappears under a jacket. The strap is also adjusted so that when you bring the camera to the eye, you can pull up on it for extra stability for slow shutters.
Do you guys have any problem using the Black Rapid strap when you have a flash attached to your camera? The top of my flash would hit the ground when kneel down. So I try to shorten the strap but then it doesn't feel very comfortable.
Technocraft--yep, that's me. How about going to a shoe repair place and having a leather padded hitch point made? Then, for the part that clips to the pants, there are ready made stay straps from gun shoulder holster manufacturers.
jasont wrote:
Do you guys have any problem using the Black Rapid strap when you have a flash attached to your camera? The top of my flash would hit the ground when kneel down. So I try to shorten the strap but then it doesn't feel very comfortable.
Yes, with a flash hanging down, it can be more cumbersome because of the extra drop. I can kneel and have the flash *just* not touch the ground - but leaning to that side and it will hit.
Italo Campilii wrote:
Do you think those straps might fall off someday? How's the sewing hold up?
You mean the snaps? Yeah, my sewing probably sucks. So far. so good though. The force against them is shear, rather than pulling apart, so I think they should hold up.
I started looking at adapting a gun shoulder holster when I made the previous strap, but I decided to only use one camera on the shoulder so my bino strap worked fine for what I wanted.
Wow. That's pretty sweet. I've been using the R-strap, and then just using the canon strap over my neck for the other camera. I get just enough clearance after the "strap impact" that I can bring the camera on the R-strap up to my face. But it's not ideal. This looks perfect.
In regards to the Black Rapid strap, I just acquired one. So far, I like it. It came with a puny (undersized) piece of plastic tubing to keep the latch from accidentally becoming unlatched. The Black Rapid comes with a small plastic tube, that prevents the gate from accidentally unlatching. I found the tube to be too short. I put one a wee bit longer on mine (about ½ inch) and it's much better. I bought a one foot piece of tubing for $0.17 at the local hardware store.
The additional length tubing is a big improvement.
The idea seems nice - the only problem is that, and correct me if I'm wrong here, but you'd need to have some sort of tie down on both sides if your rig per side is heavy.
Boy! this sure beat my "training-bra" trap idea that I thought I will going to use it someday Let see if somebody drop one or both camera before I will put my hand on your design. Call it "chicken" if you will, but a live "chicken" is a lot better than a dead "chicken" if my wife find out I drop my 5d because of this new trap!
Jimmy Ho wrote:
The idea seems nice - the only problem is that, and correct me if I'm wrong here, but you'd need to have some sort of tie down on both sides if your rig per side is heavy.
I'm working on that. It doesn't feel completely necessary, but with a lot of leaning (especially with one camera lifted) you would want it.