_jim_ wrote:
Good question. Does AGFA actually still make quality color film anymore? I have no clue. My guess is no (I am not counting Wolfen 400/500 as quality color films made by InovisCoat...which I think is an off-shoot of some part of AGFA)
https://live.staticflickr.com/65535/54725814519_930ed17a48_b.jpgCoronet in the Woods by Jim Fischer, on Flickr
Leica M5, Voigtlander 35mm f/1.5 Nokton VM, Eastman-5222, Xtol 1:1.Huss will post pictures of Ferrari's by the beach. The Orygonians manage to find rusty heaps in the western woods or on the Cascade lava plain. Might as well add a van under the bridge for an urban vibe.
Very curious, indeed! It does say "Made in Germany" vs "Packaged in Germany" or something like that. My guess was that it was just Kodak Gold 400 (like what retails as Fuji 400) sent to Germany in bulk and packaged there. Fingers crossed for you that it looks closer to Kodak Gold than Wolfen 400. Post your results when you have them!
catacore wrote: _jim_ wroteGood question. Does AGFA actually still make quality color film anymore? I have no clue. My guess is no (I am not counting Wolfen 400/500 as quality color films made by InovisCoat...which I think is an off-shoot of some part of AGFA)
https://live.staticflickr.com/65535/54725814519_930ed17a48_b.jpgCoronet in the Woods by Jim Fischer, on Flickr
Leica M5, Voigtlander 35mm f/1.5 Nokton VM, Eastman-5222, Xtol 1:1.Huss will post pictures of Ferrari's by the beach. The Orygonians manage to find rusty heaps in the western woods or on the Cascade lava plain. Might as well add a van under the bridge for an urban vibe.
One of the few shots that did not have emulsion issues. I now see why freestylephoto was clearing it out at $4/roll, but I feel they should disclose the reason why.
One of the few shots that did not have emulsion issues. I now see why freestylephoto was clearing it out at $4/roll, but I feel they should disclose the reason why.
_jim_ wrote:
Very curious, indeed! It does say "Made in Germany" vs "Packaged in Germany" or something like that. My guess was that it was just Kodak Gold 400 (like what retails as Fuji 400) sent to Germany in bulk and packaged there. Fingers crossed for you that it looks closer to Kodak Gold than Wolfen 400. Post your results when you have them!
catacore wrote_jim_ wroteGood question. Does AGFA actually still make quality color film anymore? I have no clue. My guess is no (I am not counting Wolfen 400/500 as quality color films made by InovisCoat...which I think is an off-shoot of some part of AGFA)
catacore wrote_jim_ wrotemadNbad wroteHuss will post pictures of Ferrari's by the beach. The Orygonians manage to find rusty heaps in the western woods or on the Cascade lava plain. Might as well add a van under the bridge for an urban vibe.
Agfa color film used to be repackaged Fuji, but AgfaPhoto Color 400 is a new film and apparently manufactured in Germany. That doesn’t leave a lot of options regarding what it’s based on and the most likely film seems to be Wolfen NC500.
_jim_ wrote:
What are the emulsion issues in question?
Desmolicious wroteMP, CV 28 2.8, Aristapan 100
One of the few shots that did not have emulsion issues. I now see why freestylephoto was clearing it out at $4/roll, but I feel they should disclose the reason why.
Whoa. I emailed Foma about issues I'd had on a bulk roll of Foma 400. They had no problem admitting the defect, but that was the extent of recompense.
Bummer.
Desmolicious wrote: _jim_ wroteWhat are the emulsion issues in question?
Desmolicious wroteMP, CV 28 2.8, Aristapan 100
One of the few shots that did not have emulsion issues. I now see why freestylephoto was clearing it out at $4/roll, but I feel they should disclose the reason why.
A few weeks ago, I posted photos, taken on HP-5, from my new to me Yashica D. I had a hard time getting any decent contrast and all of the images were way too bright. I thought my meter was off, there was a problem with the shutter or the lens. I even adjusted my developing time. I wrote it off as a bad experience,
Yesterday, I was preparing to scan a roll of HP-5 from the Vivitar Ultra Wide & Slim. Open up Negative Lab Pro and notice the Color Mode is set for Noritsu. Apparently in my zeal to see how the new camera works, I failed to change the setting to B&W. Feel free to laugh.
I went through and scanned them again with the proper settings, No adjustments after conversion.
I can't believe it's been 6 months since I bought a Holga and shot a roll of film. I just haven't had time since then - I've been concentrating on keeping my creative business afloat. Tough times.
So I got the inspiration to take the plastic fantastic out today. Kodak T-Max 100 (expired 2020) and developed in DF96 that was mixed in February, stored in a collapsible (no air) container, and it still did the job!!! Developed for 15 minutes (T-max needs 2x normal processing time) agitating (twirling) 5 sec every minute. Seems that everything worked fine!
Classic tourist Lower Manhattan photo from Brooklyn Bridge Park. DSC07486-Edit
Statue of Liberty. Hopefully it's still standing a few years from now... DSC07488-Edit
Skiff with Lower Manhattan background. DSC07490-Edit
Police RIB shooting down the East River. DSC07496-Edit
"Magnet" super yacht in the One 15º Marina. DSC07493-Edit
Fish cleaning station. Pier 4. Yes, people catch and eat fish caught in the East River! DSC07494-Edit
Montero Bar & Grill. Atlantic Ave., Brooklyn. DSC07498-Edit
Took the Pen FT out yesterday, and it is hard to see critical focus. The 40mm f1.4 has nice rendering near wide open and close,but not so good at distance near wide open. I'll have to stop down to probably f5.6 to get the best it can offer. However, I have already adapted manual focus Nikkor ai (third shot), and DKL mount lenses - and they work great.
Activatedfx wrote:
I can't believe it's been 6 months since I bought a Holga and shot a roll of film. I just haven't had time since then - I've been concentrating on keeping my creative business afloat. Tough times.
So I got the inspiration to take the plastic fantastic out today. Kodak T-Max 100 (expired 2020) and developed in DF96 that was mixed in February, stored in a collapsible (no air) container, and it still did the job!!! Developed for 15 minutes (T-max needs 2x normal processing time) agitating (twirling) 5 sec every minute. Seems that everything worked fine!
Activatedfx wrote:
I can't believe it's been 6 months since I bought a Holga and shot a roll of film. I just haven't had time since then - I've been concentrating on keeping my creative business afloat. Tough times.
So I got the inspiration to take the plastic fantastic out today. Kodak T-Max 100 (expired 2020) and developed in DF96 that was mixed in February, stored in a collapsible (no air) container, and it still did the job!!! Developed for 15 minutes (T-max needs 2x normal processing time) agitating (twirling) 5 sec every minute. Seems that everything worked fine!