fredmiranda.com Login

Godox/Flashpoint communication delay on Sony bodies

  
 
Ma3aev
Offline

p.1 #1Godox/Flashpoint communication delay on Sony bodies
I've used Godox/Flashpoint for years on Nikon, and never had an issue (aside from the normal stuff). Now, I'm in the process of switching to Sony and I've noticed some behavior that's driving me nuts and I'm curious if this is normal.

First noticed it with a V1mid. When the camera and flash are on, there's a little camera icon on the flash screen. When you turn off the camera, after a couple seconds the icon disappears (same time as the shutter closes over the sensor). When turning the camera back on, it takes about 5 seconds for the icon to come back and during that time the camera screen is dark (showing actual exposure) and the flash will not fire despite being fully recycled. Same applies to other lights if using the on-camera flash as a transmitter.

On Nikon, it responds immediately. 5 seconds of watching my moment disappearing on Sony unless I turn it on in advance.

I tried it on two separate a7r6 bodies, with three separate flashes (V1mid, v1Pro, V100) and all have the same behavior. It's pretty close to being a show stopper.

Anyone else having issues with this? Is there some setting I'm missing? I've disabled standby and tried it with "New Agreement" on and off to no avail as well. I don't see anything seemingly relevant in the settings on the body (Wireless Flash setting seems to just disable the V1Pro from being able to transmit when turned on).
Nov 15, 2026 at 10:04 AM
robert614
Offline
Details
p.1 #2Godox/Flashpoint communication delay on Sony bodies
I can’t answer your issue specifically. But Sony cameras have a history of having a delay from the time you turn on the camera, to when it’s ready to take photos

It has gotten better over the years. To the point where you can usually take a photo right after you turn the camera on. But I think Sony achieved this by booting the camera in steps. Basic camera function parameters are turned on first. I’m guessing flash functionality isn’t given the same priority in the boot sequence

Nikon and Canon seem to operate more like DSLR’s. Where they’re ready to go almost instantaneously. Maybe that has to do with Canikon’s photography roots. Where Sony still has an electronics company mentality. IDK

You may be able to mitigate the delay by letting the camera go into sleep mode. Rather than turning off the camera completely.
Nov 15, 2026 at 10:28 AM
jeffbuzz
Offline
Details
p.1 #3Godox/Flashpoint communication delay on Sony bodies
I don't notice any appreciable delay with a7RV and TT685IIS or V1S heads on camera. I do see a noticeable delay using the XProIIS trigger.

Are you using the V1mid as a transmitter to trigger off-camera lights?

Have you checked for firmware updates on the V1mid?
Nov 15, 2026 at 11:46 AM


FM ForumsSony ForumJoin Upload & Sell
  
 

You are not logged inLog inRegister