fredmiranda.com
Login

setting burst rate on the RX 100 VII

  
 
Ishiido
Offline

p.1 #1setting burst rate on the RX 100 VII
I looked into the "manual" of the RX 100 VII to find out about configuring the burst rate. The manual says, there is Hi(gh), Mid and Lo(w).

But my camera only offers "high" and "mid". Is there a trick or am I doing something wrongly?

Thanks!
Jul 30, 2026 at 09:43 AM
dad3and3
Offline
Details
p.1 #2setting burst rate on the RX 100 VII
If you go to page 3/14 in the menu and hit Drive Mode. Scroll down to the 2nd option which is set to Hi mode. Then press the scroll wheel either right or left side and it will scroll through Hi, Mid and Lo. You can also access the settings through your function button, Fn, on the back of the camera.

Hope that helps.
Jul 30, 2026 at 02:32 PM


FM ForumsSony ForumJoin Upload & Sell
  
 

You are not logged inLog inRegister

Switch to mobile view